Digidrive system
The exclusive Digidrive rotor drive fingers on the TD13 Series Hay Tedder are made from forged, case-hardened, heat-treated steel for maximum life and smooth power transmission.
Digidrive is a trademark of Kuhn, S.A. Joint Stock Company.
Flexible steel for durability and dependability
The TD13 Series Hay Tedder has flexible, steel tines that are heat treated for durability and highly resistant to fatigue.
Hydraulic angle adjustment for easy transport
The Frontier© TD13 Series Hay Tedder comes standard with hydraulic angle adjustment, perfect for transporting the tedder to multiple fields.
It allows the operator to set the working angle of the tedder one time, and then quickly and easily go from the transport to the working position using the tractor hydraulics from the comfort of the seat.
Balloon-technology tires on Frontier© TD13 Series
The TD13 Series Hay Tedder has large balloon tires that allow smoother operation over irregular ground.
An aftermarket, field-installed wide deflector belt kit is available for feed bunk applications on the BP1166 Bale Processor.
An aftermarket, field-installed anti-wrap deflector kit helps to prevent hay from wrapping on the tine arms and rotor housings of the TD1316 Hay Tedder during use.
An aftermarket, field-installed wheel deflector kit helps prevent hay from being trapped by the tine arms of the TD1316 Hay Tedder during operation in light and/or fluffy hay applications.
Reduction gearbox conversion kit is great for heavy windrows or night windrow applications when using the TD1316 Hay Tedder.
| Dimensions | |
| Width in working position | 5.4 m 17.7 ft |
| Tedding width | 5.0 m 16.4 ft |
| Transport width | 2.8 m 9.2 ft |
| Transport height | 2.7 m 8.7 ft |
| Transport length | 2.3 m 7.6 ft |
| Weight | |
| Shipping | 456 kg 1,005 lb |
| Tractor requirements | |
| Minimum hp (kw) | 14.9 L 20 hp |
| Hydraulic valves (SCVs) required | One |
| Tine arms | |
| Type | Round tubular |
| PTO | |
| rpm | 540 rpm |
| Tine arms | |
| Quantity per rotor | Six |
| Tine | |
| Height adjustment | Hydraulic tilt |
| Tires | |
| Working size | 6 ply: 38x15 cm 15x6 in. |
| Working type | Balloon |
| Lighting and safety | |
| Safety chain | Standard |
| Safety guards | Standard |
| SMV | Standard |
| Transport position | |
| Hydraulic vertical fold with hydraulic tilt | Standard |