Hydraulically raise and lower the RR23 Series Rotary Rake without leaving the tractor seat.
Easily adjust the pitch of the rake tines with the hand crank.
The RR23 Series Rotary Rakes have rugged 13-arm rotors featuring an adjustable cam.
This allows the operator to change the aggressiveness of the tines to the crop conditions ™ more aggressive for wet crops and less aggressive for delicate crops like alfalfa.
Four large tandem flotation tires on the RR2313 Rotary Rake and eight large tandem flotation tires on the RR2324 Rotary Rake provide maximum durability when operating over rough terrain.
Tandem walking beam axles on both RR23 Series Rotary Rakes provide a smooth ride over rough terrain and follow ground contours, allowing for proper crop pickup.
Additional flotation tires (two per rotor) are available on the RR2324 for even greater ground contour following.
Dual gauge wheels located on the front of the rear basket of the RR2324 are standard. The dual gauge wheels maintain a constant height of the tines, helping follow ground contours on rolling terrain.
The hydraulically adjustable swath curtain is standard on the rear rotor of the RR2324 Rotary Rake.
It easily adjusts for proper windrow formation in varying crop conditions.
The cam-action tine arms on the RR23 Series Rotary Rakes gently deposit the material in the windrow, saving valuable leaves.
Furthermore, the cam action forms a higher, fluffier, faster-drying windrow that saves drying time.
The tine arms are removable to allow for narrow transport widths and more compact storage.
The Frontier© RR23 Series Rotary Rake swath curtain controls the windrow formation in varying crops. It can be adjusted in or out to accommodate individual harvesting needs.
When combining multiple windrows with the RR2324, the curtain can either be removed or turned upside down to prevent interfering with the hay.
The RR2324 Rotary Rake is more versatile because it has two rotors, allowing it to rake one large windrow or two smaller windrows in a single pass.
NOTE: Includes two additional flotation tires and two spindles per rotor mounted to the front of each walking beam.
|Working width||4.57 m
|Overall working width||4.93 m
|Transport width||2.49 m
|Overall transport length||5.59 m
|Raking width||3.96 m
|PTO hp requirements||29.8 kW
|PTO requirement rpm||540 rpm|
|Hydraulic pressure requirement||9,653 bar
|Number of SCVs||One|
|Size, diameter||46.99 cm
|Quantity of double tines per arm||Four|
|Safety and markings|
|Safety tow chains||Standard|