Frontier RC20 Series

Statically balanced to reduce vibration

There is one standard blade pan for all four sizes of the RC20 Series Rotary Cutters. The blade pan is stamped instead of fabricated and is statically balanced to reduce vibration. 

The blade bar is thicker for added durability.

Puncture resistant (laminated shown)

Choose a laminated or solid rubber rear tire for the RC20 Series Rotary Cutter. Both are puncture resistant.

The laminated tire is longer lasting and provides more support when working in sandy or lighter soil conditions.

Chain deflector shown

Rubber deflector shown

The front deck and deflector support are flush with the deck on the RC20 Series Rotary Cutters. This allows water and debris an unrestricted exit off the top of the deck.

These deflectors are available in:

• Rubber or chain on the front
• Metal or chain on the rear

Provides extra strength and durability

The RC20 Series Rotary Cutters have a lower lip (Z-profile), which extends from the skid shoes to where the apron opens up. This Z-profile increases the overall durability and strength of the rotary cutter.

Provides easy maneuvering in tight areas

The round-back deck design on the RC20 Series Rotary Cutter enables easy maneuvering into tight corners and around trees, fences, and other hard-to-reach areas.

Cutting heights of 3.8 cm to 22.9 cm (1.5 in. to 9 in.)

Adjusting the cutting height is easy. Along with adjusting a tractor's three-point linkage, simply move the support bar to the desired cutting height.

The RC20 Series Rotary Cutters go as low as 3.8 cm (1.5 in.) or as high as 22.9 cm (9 in.).

Provides quick and easy connection

The iMatch system converts a tractor's 3-point hitch to fixed hooks and attaching points for a super-quick connection. (The iMatch hitch is sold separately.)

Provides quick and easy connection

The iMatch hitch system converts a tractor's 3-point hitch to fixed hooks and attaching points for a super-quick connection (the iMatch hitch is sold separately).