The RB10L and RB20L Series Rear Blades are iMatch quick-hitch compatible with Limited Category 1 hitches. This provides a quick, efficient hookup.
Skid shoes increase the life of the cutting edge on all RB Series Rear Blades and avoid damaging the work surface while cleaning corrals or plowing snow.
NOTE: Skid shoe style shown in image above used with RB2060, RB2072, and RB2084 models.
The skid shoe kits include one pair and allow the blade to ride on the shoes at a set height to allow the operator control of the blade depth.
The bundles listed below identify the rear blades they fit.
A heavy, welded mast and 4x4 steel frame deliver added strength and rigidity for Frontier© RB10L and RB20L Series Rear Blades. The full-radius moldboard is professional grade to handle heavy loads.
The turntable allows a complete 360-degree turning radius for leveling perfection when using the RB10L and RB20L Series Rear Blades.
Adjust the angle of the blade to three different positions in forward and three positions in reverse. Manually adjusting the angle and offset allows the blade to adapt to a variety of soil conditions, creating a precise finish.
All Frontier RB Series Rear Blade cutting edges are reversible, featuring bevels on both edges to give the blade twice the work life.
|Width in working position||1.8 m
|Moldboard length||152.4 cm
|Moldboard height||27.9 cm
|Moldboard thickness||0.5 cm
|Shipping per unit||91.2 kg
|PTO hp (kW)||25 hp
Max: 18.6 kW
|Angle, tilt, offset, pivot|
|Pivot angle degrees||360 degree (angle)|
|Angle forward, number of positions||0, 15, 30 degrees each side|
|Angle reverse, number of positions||0, 15 degrees each side|
|Type||Limited Cat. 1 (aftermarket Cat. 0 lift pins available)|
|Quick hitch compatibility||iMatch|
|Reversible cutting edge|