Frontier DH53 Series

Frontier DH53 Series Product Photo
Feature Overview
Frontier DH53 Series
DEBUG Ind: Agriculture, Cat: Attachments Accessories And Implements, SubCat: Utility Tractors Attachments Accessories, SubSubCat:
  • Adjustable disk blade scrapers
  • Rear hitch for attaching additional implement
  • Transport locks secure disk wings
  • Oil bath tapered roller bearings minimize maintenance
Features

Oil bath tapered roller bearings minimize maintenance

Minimal maintenance increases work hours Minimal maintenance increases work hours
Sealed with industrial-grade seals Sealed with industrial-grade seals

Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.


Available in notched disk blades for front and rear Available in notched disk blades for front and rear
Notched disk blades available in three sizes Notched disk blades available in three sizes

Disk blades on the DH53 Series Offset Disks are available in 71.1-cm, 76.2-cm, or 81.3-cm (28-in., 30-in, or 32-in.) diameter. The weight per blade on these disks ranges from 152.9 kg to 241.8 kg (337 lb to 533 lb) for superior penetration in tough soil conditions.

 

Only notched disk blades for front and rear are available on the DH53 Series models.


Transport locks secure disk wings cylinder Transport locks secure disk wings cylinder

Transport locks are standard, ensuring disk wings are in secure transport mode.


Scrapers clean disk blades Scrapers clean disk blades
Scrapers work great in wet and sticky soils Scrapers work great in wet and sticky soils

Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.


Allows operator to pull an additional implement Allows operator to pull an additional implement

A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag. 


Keeping gangs tightened increases wear life Keeping gangs tightened increases wear life
Gang nut wrenches are always there when needed Gang nut wrenches are always there when needed

End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life. 

 

Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.  


Clevis hitch makes hookup easy Clevis hitch makes hookup easy
Clevis hitch is built strong for tough jobs Clevis hitch is built strong for tough jobs

The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.


Control arms level in ground and during transport Control arms level in ground and during transport
Easy to set for desired soil condition Easy to set for desired soil condition

Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.


Clevis hitch makes hookup easy Clevis hitch makes hookup easy
Clevis hitch is built strong for tough jobs Clevis hitch is built strong for tough jobs

The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.


Transport locks secure disk wings cylinder Transport locks secure disk wings cylinder

Transport locks are standard, ensuring disk wings are in secure transport mode.


Specs
Transport
Width 3.4 m
11 ft
Ground clearance with base blades 22.9 cm
9 in.
Wheel hub bearings Dual Tapered Roller Bearings
Working
Approximate working width 3 m
10 ft
Maximum penetration 22.9 cm
9 in.
Weight
Net 3866.9 kg
8525 lb
Weight per disk blade 203.7 kg
449 lb
Tractor requirements
Recommended PTO hp range 105-132 kW
141-176 hp
Recommended drawbar hp range 89.5-111.9 kW
120-150 hp
Tires
Type Implement - Quantity of 4
Frame
Duty Heavy
Tube size 15.2x15.2x0.95 cm
6 x 6 x 3/8 in.
Hitch
Front hitch type Spade
Disk blades
Spacing 30.5 cm
12 in.
Quantity 21
Blade concavity Standard: high
Optional: low
Available blade sizes
Blade option one 711x9.5 mm
28x0.375 in.
Blade option two 762x9.5 mm
30x0.375 in.
Blade option three 813x9.5 mm
32x0.375 in.
Disk gangs
Front angle 2 Positions
Rear angle 2 Positions
Axle size 6.4 cm
2.5 in.
Axle material Round Heat Treated Alloy Steel Threaded on Both Ends
Bearing type Oil Bath Tapered Roller
Bearing wear plates Standard
Bearing standards Welded, Reinforced
Scrapers Adjustable
Lighting and safety
Markings SMV
Safety tow chain Yes
Lights Yes
Tires
Size 12.5L x 15 10 ply in.
Wheel hub type 8 Bolt
Set-up time
L L
Warranty
w w
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.

Submitting Form...
Submitting Form...


Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Homestead

127 N Krome Ave
Florida City, FL 33034
305-247-9886

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2024 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group