The new TRIPLE V 375 verticutter from Wiedenmann is a tri-gang verticutter that has 3 independent floating heads which enables it to follow the undulations of a fairway. Each head is 25” for a total width of 75”. In addition, the “turnable A-frame” creates a turning pivot point, thus allowing the machine to follow the contours and turns of a fairway.
Working depths up to 1” can be obtained. Depth adjust- ment is quick and easy via 2 cranks on the front rollers. The standard blade is a 2 mm carbide tipped cutting blade at 1.5” spacing. The Triple V 375 can be operated on a tractor as small as 25 HP. Each head is driven with an independent PTO shaft and one heavy duty chain. Operating speeds of 5 to 6 mph can be achieved depending on conditions and depth.