Rome Equipment 4250-35

For use with tractors in the 304 – 542hp range

• Both rigid and folding models are designed to give excellent uniform tillage in all stubble plowing situations.

• Main frame and gang carriers constructed of high strength tubular steel that is welded for maximum strength and durability.

• Hydraulically controlled transport assembly with cylinder transport locks to pin wheels in raised position to safeguard implement from accidentally falling during transport.

• Transport position allows approximately 12” (305mm) ground clearance.

• Adjustable gang angles of 18°, 20°, and 22° for both front and rear gangs.

• Equipped with Timken dual tapered roller bearings.

• Up to 462lbs (210kg) of weight per disk blade depending on model with an average of 444lbs (201kg).

• Up to 11” (279mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades.

• 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) shallow concavity disk blades.

• Heat treated alloy steel gang axles.

• Heavy duty fabricated steel spacer spools.

• Bearing wear plates.

• Furrow filler disk group.

• Adjustable disk blade scrapers.

• Wheel hubs with 2 tapered roller bearings on each hub that are dust and moisture protected.

• New industrial tires – 4 each. 4250-35 and 4250-49-WF: 12.5L x 15. 4250-53-WF: 16.5L x 16.1.

• Hardened pins and bushings.

• Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.

• Cylinder rod stops.

• Drawbar jack stand and safety chain.