Rome Equipment 240-984

For use with tractors in the 275 – 500hp range

• Four gauge wheel assemblies provide a consistent depth of penetration on all four gangs while providing accurate leveling.

• Double offset tandem disk harrow series is ideally suited to provide excellent uniform tillage results in all plowing applications

• Main frame and gang carriers constructed of tough high strength tubular steel, welded for maximum strength and durability.

• Transport position allows for approximately 10” (254mm) of ground clearance with standard 24” (610mm) diameter disk blades.

• Equipped with reliable, heavy duty, dual tapered 9” (229mm) self-aligning oil-bath gang roller bearings with cast housings.

• Bearing wear plates help protect the bearing housing from wear caused by abrasive soils extending their service life and decreasing cost.

• Up to 8” (204mm) depth of penetration.

• Tapered gang assemblies mounted on rock flex standards.

• 24” (610mm) diameter x 1/4” (6mm) thick, smooth (round) shallow concavity disk blades.

• Heat treated alloy steel gang axles.

• Heavy duty cast steel spacer.

• Eight 12.5L x 15 – F1 highway service tires for easy plowing, turning, and transporting.

• Heavy duty 8 bolt wheel hubs with 2 tapered roller bearings on each hub with moisture protection.

• Tandem walking beam transport.

• Four gauge wheel groups.

• Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.

• Hardened pins and bushings on all pivot points.

• Adjustable disk blade scrapers.

• Rock flex standards.

• Drawbar jack stand.