Rome Equipment 2250-45

For use with tractors in the 181 – 390hp range

• Uniquely designed harrow is available in five rigid and four wing fold models. Harrows are ideally suited to give excellent uniform tillage results in all light plowing applications.

• Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.

• Hydraulically controlled transport assembly with cylinder transport locks to pin wheels in raised position to safeguard implement from accidentally falling during transport.

• 10” (254mm) ground clearance with standard 28” (711mm) diameter disk blades.

• Adjustable gang angles of 18°, 20°, and 22° for both front and rear gangs.

• Up to 9” (229mm) maximum depth of penetration with standard 28” (711mm) diameter disk blades.

• Equipped with Timken dual tapered oil bath roller bearings.

• Standard bearing wear plates help protect the bearing housing from the wear caused by abrasive soils, extending their service life and decreasing cost.

• 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) shallow concavity disk blades.

• Heat treated alloy steel gang axles.

• Heavy duty fabricated steel spools.

• Heavy duty bearing wear plates.

• Tapered gang assemblies.

• Adjustable disk blade scrapers.

• Wheel hubs with 2 tapered roller bearings on each hub that are dust and moisture protected.

• Four dual 12L x 15 farm highway service tires for transporting, plowing, and turning.

• Hardened pins and bushings on all pivot points.

• Drawbar jack stand and safety chain.

• Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.