Rome Equipment 185-990

For use with tractors in the 200 – 400hp range

• Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.

• Weld on gang standards for optimum strength and rigidity assures precise gang alignment.

• Hydraulically controlled transport assembly and wing fold up.

• Wing fold mechanism allows wings to float up and down 5° when disk plowing.

• Equipped with oil bath dual tapered roller bearings.

• Spring loaded self-leveling hitch with front to rear leveling turnbuckle gives precise leveling control.

• Fixed gang angle of 18° for both front and rear gangs.

• Adjustable height on hitch clevis allows for straight line pull and helps prevent gouging of the front gangs.

• 9” (229mm) ground clearance with 24” (610mm) diameter disk blades.

• 185lbs (84kg) of harrow weight per disk blade.

• 24” (610mm) diameter x 1/4” (6mm) thick, smooth (round) shallow concavity disk blades for longer life.

• Tapered gang assemblies.

• Disk type balk buster.

• Adjustable disk blade scrapers.

• Heat treated alloy steel gang axles.

• Heavy duty cast steel spacer spools.

• Bearing wear plates.

• Cylinder rod stops for positive depth control adjustment.

• Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.

• Wheel hubs have 8-bolt, 6000lb (2722kg) slip in spindles on center frame and wings with two tapered roller bearings on each hub that are dust and moisture protected.

• Four dual sets of 12Lx15 farm highway service tires on center frames and wings for maximum floatation and tire capacity.

• Transport locks pin wheels in raised position for transport.

• Two heavy duty gang wrenches.

• Drawbar jack stand.