Kuhn 890 D Optifeed

Kuhn 890 D Optifeed Product Photo
Feature Overview
Kuhn 890 D Optifeed
DEBUG Ind: Agriculture, Cat: Implements, SubCat: Hay Forage, SubSubCat:
Where Innovation Meets TraditionConsistently filled, super-dense, square-edged bales are what every producer demands. KUHN LSB D Series large square balers meet and exceed these expectations, while combining high output and maximum reliability to get the job done fast. KUHN LSB D Series balers have been built from the ground up to provide you with one of the toughest, most reliable large square balers on the market. The KUHN LSB 890 D (3x3) and 1290 D (3x4) large... View full info for more.
Features
Where Innovation Meets Tradition

Consistently filled, super-dense, square-edged bales are what every producer demands. KUHN LSB D Series large square balers meet and exceed these expectations, while combining high output and maximum reliability to get the job done fast.

KUHN LSB D Series balers have been built from the ground up to provide you with one of the toughest, most reliable large square balers on the market. The KUHN LSB 890 D (3x3) and 1290 D (3x4) large square balers combine high output and maximum reliability to serve as a perfect fit for commercial hay producers.

The D Series balers have been designed with simple, yet efficient features including Integral Rotor Technology and the Power Density System to produce rock-hard, square-edged bales in all crop conditions. Rasspe® double knotters are not only reliable, but allow you to increase bale density by 10% and the number of bales per hour by 15%. Dual hydraulic-driven fans keep our double knotters clean and our competitors envious. KUHN LSB balers feature the simplest drive system in the industry, fewest moving parts, heaviest standard flywheel and longest standard bale chamber to provide outstanding durability and performance. All KUHN LSB balers are ISOBUS compatible, therefore will not require a separate VT monitor for the baler. You can easily change settings such as bale density or knife activation from the comfort of your tractor seat.

Features may include:

Power Density – The KUHN Solution

The Importance of Bale Shape: Consistently shaped bales provide more than just aesthetic appeal. A dense, consistently filled bale represents quality in every form. Square bales are easy to handle and stack. In addition, they are much more stable during transport than a poorly formed bale. In silage applications, a square-edged bale indicates less air content, resulting in higher quality feed.

The KUHN Power Density system, a single feeder fork design, proves that a well-engineered component can eliminate complexity. This system ensures consistently filled flakes and results in heavy, square-edged bales regardless of the windrow condition.

The single feeder fork combines two functions into one mechanism, eliminating unneeded components and complexity. KUHN’s exclusive Power Density system runs at twice the speed of the plunger allowing a minimum of one flake formed per plunger stroke. This creates consistent bale shape and excellent density.

The Bale Chamber

The specially designed bale chamber of the KUHN LSB machines is the result of more than 35 years of experience in large square balers. With the 10-foot long bale chamber, there is plenty of space to form a rock-hard, square-edged bale. The combination of aggressive retainers and special wedge-shaped doors brings maximum compaction and gentle expansion of the bale.

Forty-six plunger strokes per minute result in a high bale capacity. The plunger is guided by four large rollers with a 5 diameter for maximum service life.

Power Density – How Does It Work?

1. The integral rotor actively delivers the crop to the chamber.

2. The single-acting feeder fork lifts the feed up to the measuring plates.

The single-acting feeder fork continues to form the bale flake until the measuring plate is pushed back with a predetermined force.

Once the measuring plate is pushed back, it locks the single-acting feeder fork to push the perfectly formed flake into the bale chamber.

Double Knotting System

The LSB 890 D and LSB 1290 D are equipped with a double-knotting system. With the electronic knotter control, the driver has accurate information concerning twine tension at all times and receives an alarm if an issue arises. The knotting progress can be monitored directly from the tractor cab.


Specs
Key Features
  • 2019
  • Kuhn
  • LSB D Series
  • 890 D Optifeed
  • Large Square Balers
  • Power: 105 HP (78 kW)
  • 1,000 rpm
  • Choice of CV PTO - 1 3/8" -21"-spline or CV -1 3/4-20- spline
  • Standard
  • Standard hydraulic brakes
  • Pickup gauge: Standard pivoting wheels
  • 425/65R22.5
  • Motor: No monitor standard
  • Plunger strokes: 46 min
  • Bale pressure regulation: 3 hydraulic cylinders, controlled by selfcontained hydraulic system
  • Jack: Standard | Required tractor connection: 2 SA and 1 DA
  • Drawbar: Cat. 4 Bull-Pull
  • Bale size: 3' | Bale: 35" (90 cm)
  • Bale size: 3' | Bale: 31.4" (80 cm)
  • 2'-10- (0.6-0.3 m)
  • 91" (231 cm)
  • 8'1" - 9'1" (2.5-2.8 m) depending on axle and wheel size
  • Minimum machine: 19,000 lbs (8,618 kg)
  • Number of pickup tine bars: 5 | Pickup crop roller: Standard | Instake system: Integral rotor (with automatic cam clutch overload protection) | Power Density prechamber: Standard (With automatic cam clutch oveload protection | Knotter fans: Standard (centrifugal) - dual hydraulic-drive | Machine greasing: Standard automatic central greasing with quick fill grease gun | Twine storage: 30 rolls | Axle: XL steered tandem axle | ISOBU ready: Standard | Work lights: Standard service lights on needles and twine box | Road lights and signaling: Standard | Fire extinguisher: Standard 2.5 gallon refillable water type (dealer installed) | Service platform: Standard | Last bale ejector: Standard
  • Standard - Hydraulic roller
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.

Submitting Form...
Submitting Form...


Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Homestead

127 N Krome Ave
Florida City, FL 33034
305-247-9886

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2024 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group