Kuhn 44WQF

Kuhn 44WQF Product Photo
Feature Overview
Kuhn 44WQF
Primary Tillage or Seedbed Finishing. You Decide.Designed for all-purpose operation in a variety of soil and residue conditions. Working widths range from 18’10” to 44’3”. The KUHN Krause Class II, all-purpose 8215 tandem disc harrows provide all-purpose operation in a variety of soil and residue conditions. A wide range of widths are available for a variety of tractor power requirements. Quad-fold™ models offer best-in-class transport widths, while matching... View full info for more.
Call 866-609-0240 for Pricing Details
Primary Tillage or Seedbed Finishing. You Decide.

Designed for all-purpose operation in a variety of soil and residue conditions. Working widths range from 18’10” to 44’3”.

The KUHN Krause Class II, all-purpose 8215 tandem disc harrows provide all-purpose operation in a variety of soil and residue conditions. A wide range of widths are available for a variety of tractor power requirements. Quad-fold™ models offer best-in-class transport widths, while matching high-horsepower tractors.

With a variety of Residue Razor™ disc blades, and wide or narrow spacing, producers can configure the 8215 tandem disc harrow to match their residue and soil conditions for optimum performance. Choose a 24/7® leveling system for a reliable seedbed finish

Features may include:

Gang Design

With a choice of 22’’ or 24’’ diameter, 6 gauge or ¼’’ thick Residue Razor® disc blades on 8’’ or 9-1/8’’ spacing, the 8215 disc harrow can be configured for optimum performance in a variety of residue and soil conditions. The 20-degree front and 19-degree rear gang angle provide consistent residue cutting and mixing. Heavy-duty 6’’ ductile iron spools, rock-flex bearing arms and heavy-duty PEER® TILLXTREME™ maintenance-free bearings offer the strength and endurance that sets the 8215 above the competitors.

Residue Razor™ Disc Blades

All KUHN Krause tandem disc harrows feature Residue Razor disc blades that are engineered with a unique Boron steel optimizing strength to withstand stress, fractures, and to provide flexibility in rock conditions. Residue Razor discs have an exceptionally sharp edge, five times sharper than conventional blades.

Spools

KUHN Krause heavy-cast spools multiply the strength of the disc gang. Spools are line-bored for an exact fit on the tie rod and precision faced to perfectly match the blade surface. A larger bell on the concave end and a smaller bell on the convex end provide an overlap fit against the blades, supporting the blade more positively without creating a stress line.

Hi-Clearance Scrapers

The 5-inch hi-clearance rigid scrapers on 8215/8315 tandem disc harrows handle high amounts of residue. The shallow scraper angle and high integral mount improve residue flow and blade-cleaning performance.

Rock-Flex Bearing Arm

Rock-flex bearing arms provide protection from rocky or hard soil conditions. Rock-flex bearing arms feature PEER® TILLXTREME™ maintenance-free bearings.

Key Features
  • 2019
  • Kuhn
  • 8215 Tandem
  • 44WQF
  • Harrow
  • Recommended Tractor Power Range: 7-9 HP per Foot
  • Taper Blades: 22"-20" Bolt-on Furrow Filler
  • Taper Blades: 22"-20"-18"-16" Bolt-on Furrow Filler
  • Center Section: Four 280/70 R15, Walking Beams with Slip-In Spindles, 6-Bolt Heavy Duty Hubs
  • Wing: Two 280/70 R15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs
  • Disc: 20 Degrees
  • Disc: 19 Degrees
  • Color-Coded Hydraulic Hose Grips, Royal Plate Plus® Cylinder Rods
  • Recommended: 4-6 mph (6-10 km/h)
  • Disc Blade Spacing: 9" Front / 9" Rear | Disc Gangs: 1-34" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-1/4"x2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearing, Tie Rod Wrench | Disc Blades: 22"x6 ga Residue Razor® Solid Edge
  • 17'7" ft (5.4 m)
  • 13'10" ft (4.2 m)
  • Approx: 44'3" ft (13.5 m)
  • Working: 6" in (15.4 cm)
  • Approx: 27,170 lb (12 324 kg)
  • Transport Locks: Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign
  • Number of Disc Blades: 122 | Number of Bearings Arms: 34 | Tongue: Level-Lift Tongue | Leveling: Mechanical Fore/Aft Adjustable | Depth Control: Single-Point, Crank Style Hydraulic Depth Control | Disc Scrapers: 5" Hi-Clearance Rigid Scrapers with Dual Scrapers at Bearing Arm Locations
  • 5-Section Quad-Fold
  • Articulating Ball CAT III, 1-1/2" Pin
Belle Glade

2017 NW 16th St
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Clearwater

5090 Ulmerton Rd
Clearwater, FL 33760
727-828-8200

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
Sarasota

6209 McIntosh Rd
Sarasota, FL 34238
941-924-9709

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2019 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group