Kuhn 190 Trailer

Kuhn 190 Trailer Product Photo
Feature Overview
Kuhn 190 Trailer
DEBUG Ind: Agriculture, Cat: Implements, SubCat: Livestock, SubSubCat:
Redefining Commercial QualityThe efficient material flow of the BTC 100 Series Botec® 4-auger commercial mixers results in fast mixing and a quick, complete cleanout, saving you time and money. Four models are available in truck or trailer configurations, with capacities ranging from 550 to 1,000 ft³. KUHN Knight BTC 100 Series Botec® 4-auger commercial mixers are ideal for large dairy and feedlot operations. They provide the ultimate ration flexibility to... View full info for more.
Features
Redefining Commercial Quality

The efficient material flow of the BTC 100 Series Botec® 4-auger commercial mixers results in fast mixing and a quick, complete cleanout, saving you time and money. Four models are available in truck or trailer configurations, with capacities ranging from 550 to 1,000 ft³.

KUHN Knight BTC 100 Series Botec® 4-auger commercial mixers are ideal for large dairy and feedlot operations. They provide the ultimate ration flexibility to thoroughly mix a wide range of ingredients, including high percentages of byproducts or roughages. The unique Botec design eliminates dead spots for efficient material flow and fast mixing to save you time. A lower horsepower requirement, compared to competitive models, results in less fuel consumption.

Features may include:

The Botec® Advantage

A Quality Ration and Complete Cleanout : The raised lower right auger configuration, along with the close tolerance between the auger flighting and the auger troughs, results in a fast and complete cleanout. The offset upper right auger in combination with the raised lower auger requires less horsepower and provides a faster mix time.

Mix Full or Partial Loads: Due to the cross-mixing action of horizontal auger mixers, Botec® TMR mixers can properly mix batches that fill only a portion of the mixing tub providing you with the versatility to mix any size ration.

Even, Consistent Discharge: The close auger tolerances and raised lower auger design provide a fast, consistent discharge from beginning to the end of unloading. This results in even feed placement across the entire length of the bunk without a delay for mixer cleanout.

Competitive Mixers

Having parallel lower augers creates more force between the augers without increasing mixing capability. Parallel augers also do not transition the feed from right to left as well as if the right auger was raised. This design leads to slow, incomplete cleanout, decreases the mixer's processing ability and increases the horsepower requirements.


Redefining Commercial Quality

The efficient material flow of the BTC 100 Series Botec® 4-auger commercial mixers results in fast mixing and a quick, complete cleanout, saving you time and money. Four models are available in truck or trailer configurations, with capacities ranging from 550 to 1,000 ft³.

KUHN Knight BTC 100 Series Botec® 4-auger commercial mixers are ideal for large dairy and feedlot operations. They provide the ultimate ration flexibility to thoroughly mix a wide range of ingredients, including high percentages of byproducts or roughages. The unique Botec design eliminates dead spots for efficient material flow and fast mixing to save you time. A lower horsepower requirement, compared to competitive models, results in less fuel consumption.

Features may include:

The Botec® Advantage

A Quality Ration and Complete Cleanout : The raised lower right auger configuration, along with the close tolerance between the auger flighting and the auger troughs, results in a fast and complete cleanout. The offset upper right auger in combination with the raised lower auger requires less horsepower and provides a faster mix time.

Mix Full or Partial Loads: Due to the cross-mixing action of horizontal auger mixers, Botec® TMR mixers can properly mix batches that fill only a portion of the mixing tub providing you with the versatility to mix any size ration.

Even, Consistent Discharge: The close auger tolerances and raised lower auger design provide a fast, consistent discharge from beginning to the end of unloading. This results in even feed placement across the entire length of the bunk without a delay for mixer cleanout.

Competitive Mixers

Having parallel lower augers creates more force between the augers without increasing mixing capability. Parallel augers also do not transition the feed from right to left as well as if the right auger was raised. This design leads to slow, incomplete cleanout, decreases the mixer's processing ability and increases the horsepower requirements.


Specs
Key Features
  • 2019
  • Kuhn
  • BTC 100 Series
  • 190 Trailer
  • Feed Wagons
  • Minimum Requirement: 130 HP
  • Planetary: Fairfield | Roller Chain Drive: 120-140 H
  • Standard Clevis
  • Lower: 28" | Outside: 8 5/8" | Shaft: 4" | Upper: 28" | Outside: 6 5/8" | Shaft: 3 1/2"
  • Lower: Front/rear: 3/4" / 5/8" | Wall: 1/2" | Upper: Front/rear: 3/8" | Wall: 9/16"
  • 295"
  • Mixing Chamber: 216"
  • Tandem Axle – Without Extensions / With extensions: 130" / 138"
  • Tread – Tandem Axle: 102" | Door Opening Size: 40"
  • Mixer Only:101"
  • Door Opening Size: 31"
  • Maximum net: 29,700 lbs
  • Mixing Capacity – Without Extensions: 900 cu.ft.| Mixing Capacity – With Extensions: 1,000 cu.ft.
  • Unit: 22,600 lbs
  • Highway Light Kit: Standard
  • Undercarriage: Tandem Axle | Weigh System: Four-Point Compression-Type Load Cell System, Junction Box and Power Cord
  • Auger Bottoms: 3/8" | End Panel – Front and Rear: 1/4" | Mixing Chamber – Right Side: 1/4" | Mixing Chamber – Left Side: 7 GA
  • 2019
  • Kuhn
  • BTC 100 Series
  • 190 Trailer
  • Feed Wagons
  • Minimum Requirement: 130 HP
  • Planetary: Fairfield | Roller Chain Drive: 120-140 H
  • Standard Clevis
  • Lower: 28" | Outside: 8 5/8" | Shaft: 4" | Upper: 28" | Outside: 6 5/8" | Shaft: 3 1/2"
  • Lower: Front/rear: 3/4" / 5/8" | Wall: 1/2" | Upper: Front/rear: 3/8" | Wall: 9/16"
  • 295"
  • Mixing Chamber: 216"
  • Tandem Axle – Without Extensions / With extensions: 130" / 138"
  • Tread – Tandem Axle: 102" | Door Opening Size: 40"
  • Mixer Only:101"
  • Door Opening Size: 31"
  • Maximum net: 29,700 lbs
  • Mixing Capacity – Without Extensions: 900 cu.ft.| Mixing Capacity – With Extensions: 1,000 cu.ft.
  • Unit: 22,600 lbs
  • Highway Light Kit: Standard
  • Undercarriage: Tandem Axle | Weigh System: Four-Point Compression-Type Load Cell System, Junction Box and Power Cord
  • Auger Bottoms: 3/8" | End Panel – Front and Rear: 1/4" | Mixing Chamber – Right Side: 1/4" | Mixing Chamber – Left Side: 7 GA
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.

Submitting Form...
Submitting Form...


Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Homestead

127 N Krome Ave
Florida City, FL 33034
305-247-9886

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2024 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group