John Deere XUV855M S4

Feature Overview
John Deere XUV855M S4
  • Capacity to Comfortably Seat 4
  • Convertible Rear Seat/Cargo Space
  • Superior Terrain Capability
Engine power 22.8 hp / 17.0* kW
Front suspension Fully independent dual A-arm with adjustable coils
Rear suspension Fully independent dual A-arm with adjustable coils and sway bar
$18,119.00 MSRP*
Get Financed
Feature Overview
John Deere XUV855M S4
  • Capacity to Comfortably Seat 4
  • Convertible Rear Seat/Cargo Space
  • Superior Terrain Capability
Engine power 22.8 hp / 17.0* kW
Front suspension Fully independent dual A-arm with adjustable coils
Rear suspension Fully independent dual A-arm with adjustable coils and sway bar
$18,119.00 MSRP*
Get Financed
We are here to help
Features

Powerful diesel engine delivers superb starting, idling, and throttle response

XUV855 engine XUV855 engine
Remote intake and restriction indicator Remote intake and restriction indicator

The machine is powered by an 854-cc (52.1-cu in.), 3-cylinder, liquid-cooled, four-cycle diesel engine. It produces 5.1 kgm (36.9 lb-ft) of torque at 2400 rpm.

The advanced engine delivers superb starting, idling, and throttle response during operation. With minimal noise vibration and harshness (NVH), the XUV855 is the smoothest and quietest running diesel in its class.

 

The engine offers the following performance and reliability features:

  • Indirect injection diesel with glow plugs ensures fast starts in cold temperatures
  • 30.6 kW (22.8 hp*) at 2400 rpm
  • Overhead valve design for greater efficiency and fuel economy
  • Spin-on oil filter for easy servicing
  • Quiet operation through the entire rpm range
    • Molybdenum-coated pistons
    • High-stiffness cylinder block and gearcase
  • High-flow water pump and optimized water jackets maintain a steady operating temperature and eliminate hot spots
  • Full-pressure lubrication system
  • In-line mechanical fuel pump
  • Five-point, rubber isolated for quiet operation and minimal vibration
  • Dry replaceable dual-element air cleaner with remote intake and a restriction indicator
  • See-through coolant recovery tank permits the operator to check the coolant level without removing the radiator cap
    • Sealed radiator compartment keeps trash and debris on the outside of the grille

* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.


XUV front suspension detail XUV front suspension detail
#

To complement the most capable frame available in a high-performance utility vehicle, the XUV is equipped with four-wheel independent suspension.

 

A dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics.

 

The entire suspension system has been optimized to handle no cargo to maximum cargo without compromising ride quality or vehicle stability.

Dual A-arm front suspension features include:
  • 203.2 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
  • 17.5-mm (0.6875-in.) solid anti-roll bar with fully rubber isolated connecting links and pivots for minimal vehicle body roll and quiet operation
  • Heavy-duty, nodular cast-iron knuckles to support the strut, constant-velocity (CV) shaft, and wheel
  • Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
  • CV shaft protection from sticks that may puncture the rubber boot
XUV rear suspension detail XUV rear suspension detail
#

Dual A-arm independent rear suspension features include:

  • Unequal length, dual A-arm construction for superior wheel control and travel
  • 228.6 mm (9 in.) of total travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction, excellent ride quality, and vehicle control
  • Coil-over shocks absorb the most demanding terrain
  • A-arms made from square/rectangular tubing reduce weight while remaining rigid
  • Heavy-duty, nodular cast-iron uprights support wheel loads with a double row of ball bearings
  • CV driveshaft protection from sticks that may puncture the rubber boot
  • Rear sway bar for lateral stability

The Gator© XUV Crossover Series Utility Vehicle has a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously variable clutch system to the transaxle.

Key elements of the drive system include:

Variable-speed drive
Variable-speed drive Variable-speed drive

The variable-speed drive consists of two clutches and a drive belt:

  • Drive clutch is attached to the engine.
  • Driven clutch is attached to the transaxle.

Features include:

  • The engine braking system utilizes a tight belt for operation, requiring an idler sleeve on the primary clutch for neutral. The secondary clutch is a new build-on-shaft design that utilizes a cam to tune the acceleration and deceleration of the vehicle. The clutch will stay engaged, providing deceleration until approximately 5 km/h (3 mph).
  • The continuously variable transmission (CVT) air intake draws in cool air to reduce heat and the amount of water ingestion into the CVT system. The system will reduce belt slippage and improve durability.
  • A low- and high-speed forward gear offering:
    • Low range is 0 km/h to 40 km/h (0 mph to 25 mph), XUV825E and XUV825M S4
    • Low range is 0 km/h to 24 km/h (0 mph to 15 mph), XUV855E and XUV855M S4
    • High range is 0 km/h to 72 km/h (0 mph to 45 mph), XUV825E and XUV825M S4
    • High range is 0 km/h to 45 km/h (0 mph to 28 mph), XUV855E and XUV855M S4
  • Ability to creep along slowly to maneuver in tight spaces
  • Standard full-clutch enclosure with high speed fan provides longer belt and clutch life
  • High-ratio clutches with three cam weights for maximum belt clamp load in high-torque conditions
  • Powertrain reduction ratios:
    • The complete reduction ratios range for high gear is 8.6:1 at top speed and 42:1 at initial clutch engagement. This varies between the vehicles listed above.
    • The complete reduction ratios range for low gear is 17.9:1 at top speed and 86.8:1 at initial clutch engagement. This varies between the vehicles listed above.

NOTE: Delivery of torque to the ground depends on tire size, which is a function of nominal size and pressure.

How the variable-speed drive works:

  1. As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
  2. As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
  3. With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
  4. The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.
Transaxle, mechanical front-wheel drive (MFWD), and constant-velocity (CV) shafts
Side view of CVT intake and clutch on closure (XUV855 shown) Side view of CVT intake and clutch on closure (XUV855 shown)
Differential rocker switch Differential rocker switch
Rear end shot of transaxle/CV shafts Rear end shot of transaxle/CV shafts

Operator interface

  • Selectable four-wheel drive (4WD) system with a limited slip front differential and dash-mounted electronic rocker switch
    • Provides exceptional traction in challenging conditions
    • Maintains turf-friendly operation in two-wheel drive (2WD) mode
    • Illuminated for visibility in low-light conditions

Transaxle features

  • Low, high, neutral, reverse, and park transaxle
  • Automotive-style, integrated park position in transmission
  • Low range for maximum torque delivered to the wheels for hauling, pushing, and pulling
  • High range for maximum vehicle speed
  • To shift out of park, service brake must be pressed to release the parking solenoid. An audible click will be heard and allows the vehicle to shift out of park into the desired gear.

NOTE: Differential design reduces scuffing of the turf during turns because it allows the inside wheels to turn slower than the outside wheels

  • Start in gear, neutral, or park position for quick starting. The service brake must be engaged to start when in gear or neutral.
  • Large, sealed bearings are located inside the housing for better protection and durability
  • Contains gear case for transferring power to the MFWD
  • Splined shaft interfaces for maximum torque transfer and durability
  • All drive gears machined from highest grade gear steel
  • Protected by a skid plate
MFWD features
  • Electronically selectable by the operator
    • Offers limited slip functionality for precision steering and great traction while pointing and shooting out of a corner
  • Vertically oriented oil drain for easy maintenance
  • Near instantaneous torque to the front wheels when electronic switch is engaged
  • Protected by a steel skid plate and frame

Drive shafts

  • Rear CV shaft diameter measures 27 mm (1.1 in.) and is designed for peak engine and braking torque
  • Front CV shaft diameter measures 23.9 mm (0.94 in.) and is designed for peak engine torque
  • Propshaft (transaxle to MFWD shaft) diameter measures 23 mm (0.91 in.) and is designed for peak engine torque
  • All CV shaft and propshaft joints are maintenance free and protected by exclusive Neoprene boots for durability

Deluxe cargo box Deluxe cargo box
#

The deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust, dents, and reduces noise.

Deluxe cargo box tailgate
Tailgate handle Tailgate handle
Tailgate lowered to 150 degrees Tailgate lowered to 150 degrees

The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate has been improved, features truck-like performance, and can be operated with one hand.

 

The standard installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.

Deluxe cargo box tilt
Integrated handle for manual cargo-box tilt Integrated handle for manual cargo-box tilt
#

The deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist.

 

A prop rod is provided to hold the box in the upright position for operator convenience, as well as limit box pivot travel.

Integrated tie-down points
Integrated tie-down point in cargo box bed Integrated tie-down point in cargo box bed
Additional tie-down points  (TH 6X4 shown) Additional tie-down points (TH 6X4 shown)

 

The deluxe cargo box offers integrated tie-down points for increased versatility. Tie down points are located in the following areas:

  • Four corners inside the cargo-box bed
  • Four points on the load guard directly behind the operator station (A)
  • Tie-down bars on either side of the cargo box (B)
  • Six points on the underside of the cargo-box frame (circled)
Converting deluxe cargo box to a flat bed
Deluxe cargo box converted to flat bed (XUV825 shown) Deluxe cargo box converted to flat bed (XUV825 shown)

The deluxe cargo box easily converts to a flat bed. The flatbed configuration allows loading larger cargo.

Optional accessories
Brake and taillight with optional protector Brake and taillight with optional protector
Bedmat—protects the steel floor from dents Bedmat—protects the steel floor from dents
Cargo box power lift Cargo box power lift
#

Optional accessories for the deluxe cargo box include:

  • Factory-installed brake and taillight
  • Factory-installed spray-in liner (not shown)
    • Improves skid resistance and surface abrasion protection
  • Cargo box bed mat
  • Cargo box power lift
Specifications

 

 Length  1143 mm (45 in.)
 Width  1320 mm (52 in.)
 Depth  304 mm (11 in.)
 Volume  0.46 m3 (16.4 ft3)
 Weight capacity  454 kg (1000 lb)
 Dump angle  47 degrees


CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.


This Gator© XUV Crossover Utility Vehicle is equipped with power steering and a dual A-arm front suspension. These automotive-type systems exhibit excellent handling characteristics, as well as responsive steering and low steering effort:

  • Steel ball bearings secure the steering shaft and deliver smooth, responsive operation
  • Completely sealed rack-and-pinion for long life
  • Low steering ratio (lock-to-lock) provides more responsive steering and less operator input
  • Shaft U-joints are phased for a smooth, uninterrupted motion of the steering wheel
Electric power-assist steering system Electric power-assist steering system

Electric power-assist steering (EPAS) system has advanced features:

  • Anti-kickback feature reduces the amount of steering unwinding when traversing difficult terrain.
  • The system is speed sensing and adjusts steering effort as the speed of the vehicle changes.
    • As speed increases, there is less steering assist for improved road feel.
    • As speed decreases, steering assist increases to give lower steering efforts for improved maneuverability.
  • A warning/functional light on the instrument panel provides self-diagnostics and a warning light in the situation of no assist.
  • Torque sensor measures steering wheel input so the on-board computer can provide the appropriate output for various driving situations.

With the EPAS system, the operator maintains a direct, mechanical linkage from the steering wheel to the front wheels. The power-steering system interfaces mechanically with the steering system by being inserted between the steering wheel and the rack-and-pinion assembly.

A differential torque sensor is integrated into the power steering assembly. The circuit board assembly is also integral with the power-steering assembly.

Power steering does not reduce turning radius but significantly reduces steering effort by approximately 85 percent compared to those models without power steering.

 

EPAS interface diagram
EPAS interface diagram EPAS interface diagram

The numbered descriptions refer to the EPAS interface diagram shown above:

  1. Torque sensor
  2. Engine control unit (ECU)
  3. Fail-safe relay
  4. Current/thermal control circuit
  5. Reduction gears
  6. DC motor
  7. Rack and pinion
  8. Function/warning light
  9. Key power and ground
  10. Vehicle speed sensor
  11. Instrument cluster
  12. Relay module

Seating for four Seating for four

The XUV825M S4 and XUV855M S4 models feature seating for four. The rear seat will convert to provide a flat surface for extra payload and there is sealed under-seat rear storage for additional cargo.

Rear seat down Rear seat down
Storage for additional cargo under rear seat Storage for additional cargo under rear seat

Specs
Key Specs
Engine power 22.8 hp
17.0* kW
Front suspension Fully independent dual A-arm with adjustable coils
Rear suspension Fully independent dual A-arm with adjustable coils and sway bar
Additional information
Country of Manufacture U.S.
Brakes
Type Front/rear hydraulic disc with twin piston front calipers
Park brake Optional factory installed secondary, hand operated
Dimensions / Capacities
Operating weight (includes fuel/fluids) 957 kg
2109 lb
Cargo box dimensions 1143 x 304.8 x 1320 mm
45 x 12 x 52 in.
Cargo box capacity (weight) 454 kg
1000 lb
Towing capacity 680 kg
1500 lb
Fuel capacity 27.6 L
7.3 U.S. gal.
Wheelbase 2895.6 mm
114 in.
Dry weight 2018 lb
915.3 kg
Length 3911 mm
154 in.
Width 1571 mm
62 in.
Height 1903 mm
75 in.
Tread centers 1305 mm
51.4 in.
Ground clearance 280 mm
11 in.
Payload capacity 588 kg
1297 lb
Hitch Standard receiver: 5.1 cm
2 in.
Drivetrain
Maximum traveling speed 0-32 hi forward, 0-15 lo forward, 0-17 reverse mph
0-51 hi forward, 0-24 lo forward, 0-27 reverse km/h
Final drive Park, high, low, neutral, reverse transaxle
Four wheel drive Dash switch actuated four-wheel drive system with limited slip front differential, plus locking rear differential
Transmission Continuously Variable Transmission (CVT) with clutch enclosure
Traction assist Positive locking, switch actuated rear differential lock
Descent control Yes
Engine
Displacement 854 cc
Power 17.0* kW
22.8 hp
Cooling system Liquid
Features
Color Green and yellow, camouflage, olive and black
Power steering Yes
Battery / Alternator / Power port 480 CCA
55 amp @ 7000 rpm regulated, 660 watts
Instrumentation Digital display (gear position, system diagnostic light, speed, rpm, 4WD indicator, rear differential indicator, fuel level, coolant temperature, hour meter, miles, and service interval warning light)
Storage Two cup holders, under hood, glovebox, under rear seat
Seating Front and rear bench
Tires / Wheels
Front 27x9-R14 Maxxis® Bighorn® radials on alloy rims, or Maxxis Bighorn radials on steel rims
Rear 27x11-R14 Maxxis Bighorn radials on alloy rims, or Maxxis Bighorn radials on steel rims
Accessories and Attachments
Ag Management Solutions

The AMS integration kit allows the customer to mount the StarFire™ Receiver and GreenStar™ (GS) display (both receiver and display sold separately) to a Gator™ Utility Vehicle with deluxe cab.


Key features of the AMS integration kit:

  • Compatible with StarFire iTC and 3000 Receivers
  • Compatible with GreenStar 2 1800, GreenStar 2 2600, and GreenStar 3 2630 Displays
  • Receiver mounts to the roof of the deluxe cab
  • Switched power to receiver and display allows customer to run the AMS equipment even when the vehicle’s ignition is off. Receiver and display will not turn off when the vehicle’s ignition is turned on and off.


Common applications:

  • Boundary mapping
  • Flagging field obstacles
  • Soil sampling


Compatibility:

  • Model year 2011 to current HPX, XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
  • Compatible with deluxe cab
  • Not compatible with poly cab

StarFire™ 3000 Receiver and GreenStar™ (GS) installed on XUV 825i StarFire™ 3000 Receiver and GreenStar™ (GS) installed on XUV 825i
GreenStar installed with tablet mount (sold separately)GreenStar installed with tablet mount (sold separately)

The AMS integration kit allows the customer to mount their StarFire receiver and GreenStar display (both receiver and display sold separately) to their Gator Utility Vehicle.

 

Key features of the AMS integration kit:

  • Compatible with StarFire iTC and 3000 receivers
  • Compatible with GreenStar 2 1800, GreenStar 2 2600 and GreenStar 3 2630 displays
  • GS display mounts to the occupant protective structure (OPS) for convenient access
  • Ability to mount receiver to the poly roof, or on the OPS alone
  • Switched power to receiver and display allows customer to run the AMS equipment even when the vehicle’s ignition is off.  Receiver and display will not turn off when the vehicle’s ignition is turned on and off.
     

Common applications:

  • Boundary mapping
  • Flagging field obstacles
  • Soil sampling
     

Compatibility:

  • Model year 2011 to current HPX, XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
    • If installed on the poly roof, compatible with poly roofs on Model Year 2013 to current Utility Vehicles
  • Compatible with full windshield, poly cab
  • Not compatible with deluxe cab

Blade
POWERtach deflector shieldPOWERtach deflector shield

Deflector shield:

  • 203.2-mm (8-in.) length, with full-length steel reinforcement for durability
  • Horizontal configuration minimizes the impact to roll snow off the blade
Ordering information

Contact your local John Deere dealer for availability and pricing information.

POWERtach deflector shield
Order number: LPPK140

POWERtach is a trademark of POWERtach company.


POWERtach blade markerPOWERtach blade marker

Blade markers

  • 20 in. in length with 3/8-in. diameter
  • Threaded steel bases and high-strength cable inside the tubing for durability
  • Yellow with 1-in. reflective safety tape at the top ends
  • Supplied with hardware and vinyl end caps
Ordering information

Contact your local John Deere dealer for availability and pricing information.

POWERtach blade markers
Order number: LPPK120

POWERtach is a U.S.-registered trademark of POWERtach company.


POWERtach Poly Wear BarPOWERtach Poly Wear Bar

Polyurethane cutting edges offer several performance advantages over steel or rubber cutting edges:

  • Better abrasion characteristics than rubber and most metals
  • Absorbs impacts and conforms to the surface being plowed
  • Ideal choice for use on concrete, parking garages, brick pavers, cobblestones, or any other uneven surface
  • Reduces driver fatigue and equipment wear by minimizing blade and equipment vibration
  • Quiet in operation, making them ideal for residential areas and hospitals
Ordering information

Contact your local John Deere dealer for availability and pricing information.

POWERtach Poly Wear Bar
Order number: LPPWBK72

 

POWERtach is a U.S.-registered trademark of POWERtach company.


POWERtach rubber squeegeePOWERtach rubber squeegee

Rubber squeegee

  • Absorbs impacts and conforms to the surface being plowed
  • Is a great choice for use on sidewalks and other sensitive surfaces such as brick and cobblestone
  • Provides quiet operation ideal for residential and commercial applications
Ordering information

Contact your local John Deere dealer for availability and pricing information.

POWERtach rubber squeegee
Order number: LPPK150

POWERtach is a U.S.-registered trademark of POWERtach company.


POWERtach heavy-duty skid shoesPOWERtach heavy-duty skid shoes

Benefits of cast-iron skid shoes include:

  • Deliver three times the wear resistance of conventional steel shoes
  • Ultra-rugged construction consisting
    • 3.18-kg (7-lb) in weight (per individual skid shoe)
    • 146.1-mm (5-3/4-in.) shoe diameter
    • 25.4-mm (1-in.) shoe thickness
Ordering information

Contact your local John Deere dealer for availability and pricing information.

POWERtach heavy-duty skid shoes
Order number: LPPK160

POWERtach is a trademark of POWERtach company.


Cab
Shown on XUV825iShown on XUV825i

The operator protection system (OPS) poly rear window is an excellent solution for operators seeking to reduce dust and air flow throughout the operator station when coupled with a half or full windshield (vent open for best results). Made out of high-impact-strength abrasion-resistant polycarbonate material, this rear window is highly durable and scratch resistant. It also attaches to and detaches from the OPS with ease, thanks to the quick-clamp mounting system.

 

Compatible with Gator™ XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and HPX Utility Vehicles.


Poly cab seal kitPoly cab seal kit

Improve the OPS Poly Cab seal on the Gator™ Utility Vehicle with the addition of the seal kit which installs around the doors, windshield, roof, and cab frame.

 

Compatible with OPS Poly Cabs installed on 4 passenger XUV825i/E/M and XUV855D/E/M Gator™ Utility Vehicles.


OPS rear panel (shown with poly roof)OPS rear panel (shown with poly roof)
#

The rear panel for the OPS poly cab is ideal for outdoor enthusiasts and others desiring four-season weather protection.

 

The Poly Cab is sold as individual components; OPS poly or glass windshield, OPS poly roof, OPS rear panel, and doors kit. This gives operators the flexibility to configure the vehicle to meet their unique needs.

Key features of the rear panel:

  • Rear panel is thermoformed from thick ABS plastic for impact resistance, durability, and style
  • Three-piece sliding glass window, which provides excellent visibility and ventilation
  • Installs in minutes with quick clamps to the OPS structure
  • Installed with full windshield (vent open) to help eliminate dust from entering operator station

Compatible with:

  • MY13-current HPX (if equipped with cargo box power lift)
  • MY13-current 625i
  • MY13-current 825i and 825i S4
  • MY13-current 855D and 855D S4

Poly cab doors (shown with rear panel, poly roof, and glass windshield)Poly cab doors (shown with rear panel, poly roof, and glass windshield)
Poly cab doors (shown with glass windshield, poly roof, and rear panel) Poly cab doors (shown with glass windshield, poly roof, and rear panel)

The poly cab doors for the operator protection system (OPS) poly cab is ideal for outdoor enthusiasts. Doors are not sealed for water tight performance.

 

The poly cab is sold as individual components; OPS poly or glass windshield with wiper, OPS poly roof, OPS rear panel, and the doors kit. This gives operators the flexibility to configure the vehicle to meet their unique needs.

 

Key features of the poly cab doors:

  • Doors are thermoformed from thick acrylonitrile butadiene styrene plastic for impact resistance, durability, and style
  • Reinforced with steel tubing for rigidity
  • Mounted on heavy-duty hinges for durability
  • Automotive style latches
  • Locking door handles
  • Large glass sliding windows provide excellent side-to-side visibility
  • Standard side rear-view mirrors on the driver and passenger front doors
  • Integrated seals to improve the operator enclosure

 

Optional accessories designed to integrate with the OPS poly cab system:

  • Cab heater
  • Heavy-duty POWERtach™ 72-in. blade
  • OPS and roof mounted lights
  • OPS seat belt comfort strap
  • OPS overhead organizer
  • Floor mats
  • Beacon light

 

Compatible with:

  • Model year 2013 - current Gator™ XUV 825i/E/M S4 and XUV 855D/E/M S4 Utility Vehicles

Cargo Box
Cargo box pail holderCargo box pail holder
Cargo box pail holderCargo box pail holder

The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.


Cargo bed extenderCargo bed extender
Cargo bed extenderCargo bed extender

The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.


Deluxe cargo box bed matDeluxe cargo box bed mat

The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.


Cargo box divider located at rear of cargo bedCargo box divider located at rear of cargo bed
Cargo box divider located at front of cargo bedCargo box divider located at front of cargo bed
Speedrail lock in the unlocked postionSpeedrail lock in the unlocked postion
Speedrail lock in the locked postionSpeedrail lock in the locked postion

The Gator™ XUV Series can be equipped with an optional divider for the deluxe cargo box. The dividers can be positioned at the front or rear of the cargo box bed. To change positions of the dividers, simply release the speedrail locks by hand and slide into new position, then close the locks to secure the dividers.


Cargo box side extension kit Cargo box side extension kit
#

The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch. 

 

Product features include:

  • Four-sided structure that increases cargo box side height to 533 mm (21 in.) and volume to 0.74 m3 (26 cu ft)
  • Mounted on the sides and front with hardware, while the tailgate can be attached or removed without tools
    • Tailgate pivots at the top (similar to a dump truck) for ease of dumping loose material
  • Laser-cut, heavy-gauge, powdered-coated steel provides excellent durability
  • Compatible with all model year 2011 to current Gator XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and M-Gator A2 Utility Vehicles
  • Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
  • Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles.
  • Compatible with Gator cabs and bedliner

 

NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.


Cargo box side extension kit (required, sold separately)Cargo box side extension kit (required, sold separately)
Cargo box side extensions coverCargo box side extensions cover
Tailgate down, side extension flipped upTailgate down, side extension flipped up
Key features
  • The cover closes off the top of the side extensions, ideal for hauling hunting dogs and small animals
  • Easily attaches to the side extension kit (required, sold separately)
  • Dimensions: 132-cm (52-in.) wide x 65-cm (25.5-in.) tall x 114-cm (45-in.) deep
Compatibility
  • Model year 2011 to current XUV625i, XUV825i/E/M, XUV825i/E/M S4, XUV855D/E/M, and XUV855D/E/M S4 Utility Vehicles
  • Model year 2010 to current TX, TX Turf, TH, and TE Utility Vehicles
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
  • Model year 2018 to current HPX615 and HPX815 Utility Vehicles

Label kit for toolboxes (Green & Yellow) - BM26220


Tool rackTool rack
Tool rack with toolsTool rack with tools

The side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box. The holders are adjustable, allowing the users to carry a wide array of items in the racks.

Tool rack holder detailTool rack holder detail
Adjusting the tool rack holder Adjusting the tool rack holder

Spare tire carrierSpare tire carrier
Spare tire carrierSpare tire carrier

Easily mount a spare tire to the side of the cargo box with this convenient kit.

 

Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.


Sportsman gear bag (closed)Sportsman gear bag (closed)
Sportsman gear bag (open)Sportsman gear bag (open)
Quick-connect latches on cargo boxQuick-connect latches on cargo box
Key features
  • Holds two firearms up to 1.3 m (51 in.) in length
  • Firearm support blocks can be removed to transport a wide array of gear
  • Bag easily attaches and detaches to cargo box with quick-connect latches for easy storage in the off season
  • Convenient carry straps
  • Made from waterproof, mildew- and abrasion-resistant material to keep gear dry
  • Oversized, corrosion-resistant zippers for durability and ease of use
  • Rain flap covers the zipper to prevent water infiltration
Compatibility
  • Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
  • Model year 2010 to current TX, TX Turf, TH, and TE Utility Vehicles
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information

Available through Order Zone


Cold Start Packages
Engine coolant heaterEngine coolant heater
Adapter partsAdapter parts

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.


Engine coolant heaterEngine coolant heater
Adapter partsAdapter parts

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.


Cover
Yellow bench seat coverYellow bench seat cover

Gator™ HD XUV bench seat cover

  • Designed for heavy-duty two-passenger and four-passenger Gator XUV Utility Vehicles
  • Compatible with Gator XUV625, XUV825, XUV855, XUV825 four-passenger, and XUV855 four-passenger Utility Vehicles
  • Includes cover for seat and back benches
  • Must order two kits for four-passenger (two-row) vehicles
  • Protection for bench seats from mud and stains
  • Cushioned seat for extra comfort
  • Convenient pockets to store tools and gear
  • Elastic hem-cord closure for easy adjustment resulting in a custom-like fit
  • Easy access to seatbelts
  • Options for storing gear behind the seats with zippered and open-top pouches

Ordering information
Contact the local John Deere dealer for availability and pricing information.


Drawbar
48-mm (1-7/8-in.) hitch ball48-mm (1-7/8-in.) hitch ball

The 48-mm (1-7/8-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

 

The ball hitch is available through Service Parts.


48-mm (1-7/8-in.) ball hitch shown48-mm (1-7/8-in.) ball hitch shown

The 51-mm (2-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

 

The ball hitch is available through Service Parts.


Drawbar kit for receiver hitchDrawbar kit for receiver hitch

Description:

  • Kit includes a 51-mm (2-in.) drawbar, 10-mm (0.39-in.) pin, and hair cotter pin
  • Steel construction has a 25-mm (1-in.) ball hole size
  • Can be mounted in the standard rear receiver hitch or the optional front receiver hitch
  • Compatible with all Gator model year 2011-current XUV560, XUV560 S4, XUV590, XUV590 S4, XUV 625i, XUV 825, XUV 855, RSX860, and M-Gator™ A2 Utility Vehicles
  • Compatible with HPX 615 and 815 Utility Vehicles
  • Compatible with XUV 620i and XUV 850D Utility Vehicles

NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.


Floor Mat
Floor mat (shown on XUV 825i)Floor mat (shown on XUV 825i)

The washable rubber mat protects the vehicle floor.

 

Compatible with Gator HPX, XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, M-Gator™ A2 Military, and M-Gator A3 Military Utility Vehicles. 


Floor mats (shown on XUV 825i S4)Floor mats (shown on XUV 825i S4)

The removable and washable rubber floor mats provide an added layer of protection to the floor of the vehicle, and guards against dents, dings, and scratches.

Compatible with model year 2013-current XUV 825i S4 and XUV 855D S4 Utility Vehicles.


Front Rack

Front Hood Rack - BM22980


MOLLE Device Pouch - Black - LP66151


MOLLE Device Pouch - Camo - LP66150


MOLLE Fire Extinguisher Pouch - Black - LP66153


MOLLE Fire Extinguisher Pouch - Camo - LP66152


MOLLE Large Pouch - Black - LP66149


MOLLE Large Pouch - Camo - LP66148


MOLLE Small Pouch - Black - LP66147


MOLLE Small Pouch - Camo - LP66146


Guards
Cargo box fender guard kitCargo box fender guard kit
#

The cargo box fender guards offer enhanced styling in addition to heavy-duty protection to the side of the cargo box:

  • Compatible with all model year 2011 and later Gator™ XUV 625i, XUV 825i, and XUV 855D Utility Vehicles.
  • Compatible with model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles.
  • Compatible with model year 2010 and later Gator TX, TX Turf, and TE Utility Vehicles.

NOTE: BM22767 rear bumper is required to install the cargo box fender guards.


Deflector plate detailDeflector plate detail

The large, heavy-duty skid plate adds additional protection for the frame and critical powertrain components:

  • Thick, 3.8-mm (0.15-in.) material handles impacts
  • Compatible with model year 2011 and later Gator™ XUV 855D Utility Vehicles
  • Compatible with model year 2013 - current Gator XUV 855D S4 Utility Vehicles

Front CV guardsFront CV guards
#

Constant-velocity (CV) guards add additional protection for the A-arms and CV half shafts:

  • Formed steel guards handle impacts while maintaining a low unsprung mass
  • Easily bolts to the A-arms
  • Drainage holes provided to prevent buildup of dirt, grass, and other loose materials
  • Compatible with all Gator™ XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, and M-Gator A3 Utility Vehicles

Heavy-duty fender guard (shown on XUV825i)Heavy-duty fender guard (shown on XUV825i)

The heavy-duty fender guards provide a modern and aggressive appearance for all model year 2011-current Gator™ XUV625i, XUV825i, XUV855D, and M-Gator A2 Utility Vehicles.


It is also compatible with model year 2013-current Gator XUV825i S4 and 855D S4, and model year 2018-current gas and diesel HPX Utility Vehicles.

  • Large, 1.75-in. (44.45-mm) diameter tubing provides superb protection for the front grille, lights, and fenders
  • Compatible with standard front bumper

Brush guard shown on XUV855D Olive and BlackBrush guard shown on XUV855D Olive and Black
Brush guard shown on XUV625i CamoBrush guard shown on XUV625i Camo

 

NOTE: Images above show brush guard with Adventure light kit installed.

 

The heavy-duty brush guard provides a modern and aggressive appearance for all model year 2011 to current Gator™ XUV625i, XUV825i, XUV855D, and M-Gator A2 Utility Vehicles. It is compatible with model year 2018-current gas and diesel HPX Utility Vehicles.

  • Massive welded brush guard is made of large-diameter, 44.45-mm (1.75-in.) tubing and thick steel plates to provide superb protection for the front grille, lights, and hood
  • Possesses welded brackets for quick installation of the Adventure light kit
  • Rotates forward without tools for easy access to service points and additional storage under the hood

Rear CV guardsRear CV guards
#

CV guards add additional protection for the A-arms, brake lines, and CV half shafts:

  • Formed steel guards handle impacts while maintaining a low unsprung mass
  • Easily bolts to the A-arms with six bolts
  • Drainage holes provided to prevent buildup of dirt, grass, and other loose materials
  • Compatible with all model year 2011 - current Gator™ XUV 625i, XUV 825i, XUV 855D, and M-Gator A2 Utility Vehicles
  • Compatible with model year 2013 - current Gator XUV 825i S4 and 855D S4 Utility Vehicles

Harnesses
Brush guard light harness kitBrush guard light harness kit

The brush guard light harness kit is required when installing the light kits to the brush guard or PreRunner bumper on the Gator™ RSX.

 

The kit includes the switches and wire harnesses.


Front OPS / roof light harness kitFront OPS / roof light harness kit

The front OPS/roof light harness kit is required when installing the light kits to the front of the OPS or roof. Also requires OPS switch bank.

 

The kit includes the switch and wire harnesses from the OPS switch bank to the lights.


Heater
Heater kitHeater kit

Three directional louvers provide windshield defrosting and complete operator comfort.

 

Kit includes:

  • High-output two-speed heater
  • Mounting hardware
  • Coolant hoses
  • Electrical harness 

 

Heater outputs around 9800 BTU

 

Compatible with the following vehicles:

  • All model year 2011 - current Gator™ HPX Gas, HPX Diesel, XUV 625i, XUV 825i, XUV 855D, and M-Gator A2 Utility Vehicles
  • Also compatible with model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles

Kit includes:

  • Hoses and conduit to allow cab heater kit to work on XUV 825i and 855D S4 Utility Vehicles.

 

Compatible with:

  • XUV 825i S4 and 855D S4 Utility Vehicles

Heater fitting kitHeater fitting kit

It is compatible with the following vehicles:

  • All model year 2011 - current Gator™ XUV 855D and M-Gator™ A2 Utility Vehicles
    • This heater fitting kit works with BM23608 heater kit and diesel engine
  • All model year 2004 - current Gator HPX and XUV 850D Utility Vehicles
    • This heater fitting kit works with BM23608 heater kit and diesel engine
  • All model year 2013 - current Gator XUV 855D S4 Utility Vehicles
    • This heater fitting kit works with BM23608 heater kit and diesel engine

Lighting
Beacon lightBeacon light

Features and benefits:

  • 3-in. (76-mm) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
  • Especially useful for working around properties and job sites
  • Acrylic amber lens resists scratching and scuffing
  • Impact-resistant nylon housing
  • SAE J845 (Class 3)-compliant
  • UL recognized
  • Stands 4.4 in. (111.5 mm) tall

Compatible with the following vehicles:

  • Model year 2006 to current Gator™ HPX Utility Vehicles
    • Requires poly roof and operator protection system (OPS) switch bank for mounting
    • Requires beacon light harness kit
  • Gator XUV 620i and 850D Utility Vehicles
    • Requires poly roof and OPS switch bank for mounting
    • Requires beacon light harness kit
  • Model year 2011 to current Gator XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
    • Requires poly roof and OPS switch bank for mounting
    • Requires beacon light harness kit
  • Gator XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4 Utility Vehicles
    • Requires OPS switch bank and brake/tail light for brake light mounting or OPS switch bank and poly roof for roof mounting
    • Requires beacon light harness kit
  • Gator RSX Utility Vehicles
    • Requires OPS switch bank and brake/taillight for brake light mounting or OPS switch bank and poly roof for roof mounting
    • Requires beacon light harness kit

Brake and taillight kitBrake and taillight kit

The integrated brake and taillight kit offers an updated, stylish design in addition to being highly visible in all light conditions.

Compatible with:

  • Model year 2011 - 2017 Gator™ XUV 625i, XUV 825i, and XUV 855D Utility Vehicles
  • Model year 2013 - 2017 XUV 825i S4 and XUV 855D S4 Utility Vehicles
  • Model year 2010 - 2017 Gator TX, TX Turf, and TH 6X4 Utility Vehicles equipped with the deluxe cargo box

Brake and taillight kitBrake and taillight kit

The integrated brake and taillight kit offers an updated stylish design in addition to being highly visible in all light conditions.

 

NOTE: For model year 2018 and newer HPX615 and HPX815 Utility Vehicles, the reverse lights will not illuminate.

 

Compatible with:

  • Model year 2017 – newer Gator™  XUV 825i, XUV 825i S4, XUV 855D, and XUV 855D S4 Utility Vehicles
  • Model year 2018 – newer Gator HPX615 and HPX815 Utility Vehicles

Roof mountedRoof mounted
Brush guard mountedBrush guard mounted
Rigid Industries LED driving lights (two lights per kit)
Lux = measure of intensity of light that hits or passes through a surfaceLux = measure of intensity of light that hits or passes through a surface

Mounted on the front operator protection system (OPS)/roof or brush guard for extreme night driving lights.

 

  Watts (per light)AMP draw (per light) LEDs (per light) Raw lumens (per light) Beam distance ft (m) 
LED driving lights 34.5 2.5 3030 942 (287) 
LED light specifications:
  • 50,000+ hour lifespan
  • IP69K certified
  • Polycarbonate lens
  • Aluminum housing
  • Powder-coat finish
  • Sealed Deutsch connectors
  • Operating Temp -40°F – 145°F
  • MIL810-STDG vibration certified
  • ASTMB117 salt / fog certified
  • Standard black lens covers

 

The LED lights are compatible with the HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, RSX Utility Vehicles.

 

These lights are not compatible with Jensen radios or deluxe cab frame.

 

The LED lights can be mounted on the brush guard, roof (front or rear), or directly on the OPS (front or rear). Roof or OPS mount requires the OPS Switch Bank.  The LED light kits also require the necessary Light Harness Kit based on the desired light mounting location:

 

Part Number Description 
 BM25704 LED driving lights
 BM25619 Brush guard light harness kit
 BM25620 Front OPS/roof light harness kit
 BM25731 Rear OPS/roof light harness kit
 BM25621 Rear OPS/roof light harness kit (S4s)
Front OPS/roof light harness kitFront OPS/roof light harness kit
Rear OPS/roof light harness kitRear OPS/roof light harness kit
Brush guard light harness kitBrush guard light harness kit

Roof mountedRoof mounted
Rigid Industries LED work lights (two lights per kit)
Lux = measure of intensity of light that hits or passes through a surfaceLux = measure of intensity of light that hits or passes through a surface

Ideally mounted on the front or rear operator protection system (OPS)/roof for light around the vehicle to work at all hours of the night.

 

  Watts (per light)AMP draw (per light) LEDs (per light) Raw lumens (per light) Beam distance ft (m) 
LED work lights 20 1.45 1568 866 (264) 
LED light specifications:
  • 50,000 or more hour lifespan
  • IP69K certified
  • Polycarbonate lens
  • Aluminum housing
  • Powder-coat finish
  • Sealed Deutsch connectors
  • Operating temperature - 40°F – 145°F (4°C-63°C)
  • MIL810-STDG vibration certified
  • ASTMB117 salt / fog certified
  • Standard black lens covers

 

The LED lights are compatible with the Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, RSX Utility Vehicles.

 

These lights are not compatible with Jensen radios or deluxe cab frame.

 

The LED lights can be mounted on the brush guard, roof (front or rear), or directly on the OPS (front or rear). Roof or OPS mount requires the OPS switch bank.  The LED light kits also require the necessary light harness kit based on the desired light mounting location:

 

Part Number Description 
 BUC10222 LED work lights
 Review configurator for latest part numbers Brush guard light harness kit
 Review configurator for latest part numbers Front OPS/roof light harness kit
 Review configurator for latest part numbers Rear OPS/roof light harness kit
 Review configurator for latest part numbers Rear OPS/roof light harness kit (S4s)
Front OPS/roof light harness kitFront OPS/roof light harness kit
Rear OPS/roof light harness kitRear OPS/roof light harness kit
Brush guard light harness kitBrush guard light harness kit

Shown on XUV 825i S4Shown on XUV 825i S4
Shown on rear of XUV 550 S4Shown on rear of XUV 550 S4

Increase the capability of your Gator™ XUV 550 S4, XUV 825i S4, and XUV 855D S4 Utility Vehicles by adding rear-mounted mid-range lights. The lights mount to the poly roof or on the operator protection system (OPS).

Kit includes the pair of mid range lights, wire harness with switch, and all mounting hardware.

Product attributes:

  • This flood light kit provides a wide-range of light, making it ideal for tasks at night
  • Especially useful for working around properties and job sites
  • Requires OPS switch bank; switch bank can accommodate up to three sets of lights

OPS with power wire and switch bankOPS with power wire and switch bank
Switch bank (detail)Switch bank (detail)

Product attributes:

  • Accommodates up to three sets of OPS lights
  • Allows for simple wire routing - only two wires run through the OPS or roll-over protective structure (ROPS) tubes; each light kit has its own switch and wiring harness
  • Switches are located in the OPS or rollover protective structure (ROPS)

Compatible with:

  • Model year 2011 - current Gator™ XUV, HPX Gas, HPX Diesel, and M-Gator A2 Non-Military Utility Vehicles
  • Model year 2012-2013 Gator XUV 550, XUV 550 S4, and RSX Utility Vehicles
  • Model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles
  • Current Gator XUV560, XUV560 S4, XUV590, and XUV590 S4 Utility Vehicles

Rear OPS / roof light harness kitRear OPS / roof light harness kit

The rear OPS/roof light harness kit is required when installing the light kits to the rear of the OPS or roof on the Gator™ S4 Vehicles. Also requires OPS switch bank.

 

The kit includes the switch and wire harnesses from the OPS switch bank to the lights.


Brake and taillight protectorBrake and taillight protector

The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.


Work lights (rear mounted)Work lights (rear mounted)

Increase the capability of the Gator™ Utility Vehicle by adding work lights. Lights mount to the front or rear of the poly roof or directly to the operator protection system (OPS).

 

Kit includes the pair of work lights and hardware. Requires necessary light harness kit based on desired mounting location.

 

Lights can also be installed in a low mount position behind the front bumper.

 

Product attributes:

  • This flood light kit provides a wide range of light, making it ideal for tasks at night
  • Especially useful for working around properties and job sites
  • Requires OPS switch bank when mounted to roof or OPS

Compatible with:

  • XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4
  • HPX
  • XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, and XUV 855D S4
  • RSX Utility Vehicles

Mirrors
Shown mid-size XUVShown mid-size XUV

The OPS rearview mirror for Gator™ Utility Vehicles can be installed when equipped with an OPS.

The rearview mirror can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.

Product attributes include:

  • Composite components made of impact resistance materials
  • Installs with quick clamp to OPS tube
  • Compatibility with all Gator Utility Vehicles equipped with an OPS

Shown on Gator™ HD XUVShown on Gator™ HD XUV
Shown on HD XUV  Shown on HD XUV

The OPS side mirrors for Gator Utility Vehicles can be installed when they are equipped with OPS.

 

The side mirrors can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.

 

Product attributes include:

  • Composite components made of impact-resistant materials
  • Installs without tools and easily adjustable
  • Compatibility with all Gator HPX, XUV 620i, XUV 850D, XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, RSX, M-Gator A2, and M-Gator A3 Utility Vehicles equipped with an OPS

NOTE: OPS side mirrors are not compatible with the deluxe cab or poly cabs (poly cabs include standard mirrors).


Roof
OPS soft roof – shown in blackOPS soft roof – shown in black
  • Provides year-round weather protection to the operator and passenger when a Gator™ XUV 825i S4 Utility Vehicle or 855D S4 Utility Vehicle is equipped with an OPS or rollover protective structure (ROPS)
  • Useful for minimizing sun exposure to the operator, passenger, and vehicle operating station
  • One-piece, soft roof allows for tool-free attachment/detachment to the OPS or ROPS with four simple adjustable straps
  • Heavy-weight polyester fabric for maximum durability and resistance to tear
  • PVC coating provides for superior water resistance and repellency
  • Compatible with the OPS rear screen, OPS poly windshields, and OPS organizer
  • Compatible with the Gator XUV 825i S4 and 855D S4 Utility Vehicles

NOTE: Must be removed for transport on an open trailer or truck.

Ordering information

Contact the local John Deere dealer for availability and pricing information.


OPS soft roof - camoOPS soft roof - camo
  • Provides year-round weather protection to the operator and passenger when a Gator™ XUV 825i S4 or 855D S4 is equipped with an OPS or rollover protective structure (ROPS)
  • Useful for minimizing sun exposure to the operator, passenger, and vehicle operating station
  • One-piece, soft roof allows for tool-free attachment/detachment to the OPS or ROPS with four simple adjustable straps
  • Heavyweight polyester fabric for maximum durability and resistance to tear
  • PVC coating provides for superior water resistance and repellency
  • Compatible with the OPS rear screen, OPS poly windshields, and OPS organizer
  • Compatible with the Gator XUV 825i S4 and 855D S4 Utility Vehicles

NOTE: Must be removed for transport on an open trailer or truck.

Ordering information

Contact the local John Deere dealer for availability and pricing information.


Side view of black OPS poly roofSide view of black OPS poly roof
Rear view of black OPS poly roofRear view of black OPS poly roof

Features of the OPS poly roof include:

  • Provides all-year-round weather protection to the operator and passenger when a Gator™ XUV is equipped with an operator protection system (OPS)
  • One-piece ABS roof easily attaches/detaches to the OPS quick-clamp mounting system
  • Useful for minimizing sun exposure to the operator, passenger, and vehicle operating station
  • Molded-in water troughs route water away from the operator and passenger
  • Acts as the foundation to build an OPS poly full enclosure (designed to work with the OPS poly full windshield kit and OPS poly rear panel and doors kit)
  • Compatible with all model year 2013 – current XUV 825i/E/M S4 and XUV 855D/E/M S4 Utility Vehicles when equipped with an OPS

Seat
Cushioned covers protect new seats and renew old seatsCushioned covers protect new seats and renew old seats

Features:

  • Heavy-duty seat protection against sun damage, rain, and dirt
  • Cushioned for extra comfort
  • Elastic cord hem for a custom fit
  • Two convenient zippered pockets keep tools and gear within reach 
  • Two mesh stuff pockets
  • Two-year warranty


Ordering information
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.


Front bench seat coverFront bench seat cover

Available through OrderZone

 

Each kit contains: one bench base cover, one backrest cover, and installation instructions

 

Special features:

  • Exceptional abrasion, tear and puncture resistance
  • Constructed with military-grade Cordura™ fabrics
  • Protects original equiment manufacturer (OEM) seats from mud, snow, and debris
  • Quick and easy installation
  • Also available in black
  • Front seat has modular lightweight load-carrying equipment (MOLLE) webbing between driver and passenger for MOLLE pouches
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics.


Front bench seat coverFront bench seat cover

Available through OrderZone

 

Each kit contains: one bench base cover, one backrest cover, and installation instructions

 

Special Features:

  • Exceptional abrasion, tear, and puncture resistant
  • Constructed with military-grade Cordura™ fabrics
  • Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
  • Quick and easy installation
  • Available in REALTREE HARDWOODS HD™ pattern
  • Front seat has MOLLE webbing between driver and passenger and back panel for MOLLE pouches
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


Front bench seat coverFront bench seat cover

Available through OrderZone

 

Each kit contains: one bench base cover, one backrest cover, and installation instructions

 

Special features:

  • Exceptional abrasion, tear, and puncture resistant
  • Constructed with military-grade Cordura™ fabrics
  • Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
  • Quick and easy installation
  • Also available in black
  • Front seat has MOLLE webbing between driver and passenger and back panel for MOLLE pouches
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics.


Rear bench seat coverRear bench seat cover

Available through OrderZone

 

Each kit contains: one bench base cover, one backrest cover, and installation instructions

 

Special features:

  • Exceptional abrasion, tear, and puncture resistant
  • Constructed with military-grade Cordura™ fabrics
  • Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
  • Quick and easy installation
  • Available in REALTREE HARDWOODS HD™ pattern
  • Back rest has modular lightweight load-carrying equipment (MOLLE) system between driver and passenger for MOLLE pouches
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


Rear bench seat coverRear bench seat cover

Available through OrderZone

 

Each kit contains: one bench base cover, one backrest cover, and installation instructions

 

Special features:

  • Exceptional abrasion, tear, and puncture resistant
  • Constructed with military-grade Cordura™ fabrics
  • Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
  • Quick and easy installation
  • Available in REALTREE HARDWOODS HD™ pattern
  • Back rest has modular lightweight load-carrying equipment (MOLLE) system between driver and passenger for MOLLE pouches
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


Front bench seat coverFront bench seat cover

Available through OrderZone

 

Each kit contains: one bench base cover, one backrest cover, and installation instructions

 

Special features:

  • Exceptional abrasion, tear, and puncture resistant
  • Constructed with military-grade Cordura™ fabrics
  • Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
  • Quick and easy installation
  • Also available in REALTREE HARDWOODS HD™ pattern
  • Front seat has modular lightweight load-carrying equipment MOLLE webbing between driver and passenger for MOLLE pouches
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


Sprayers

170.344 L (45 gal) High Performance Sprayer - LP22908


25 Gallon Bed Sprayer - LP33597


25-gal. (94 L) portable sprayer25-gal. (94 L) portable sprayer

The 25-gal. (94 L) portable sprayer is ideal for caring for shrubs, decorative trees, and fruit trees.

  • Four rubber feet bolted to the bottom of the tank protect and stabilize it when placed in a cart, Gator™, or other vehicle for transporting
  • Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft in height
  • Handgun comes with a 19-ft hose and a handgun with 14-in. wand

Additional features include:

  • 100 psi, 2.1 gpm diaphragm-type pump designed for high-hour commercial applications; it can be run dry without damage
  • Spray wand is constructed of non-corrosive polypropylene material with Viton® components for remote spray jobs
  • Two-wire fused wiring harness complete with quick-disconnects for convenient electrical hookup
  • Large cap to easily fill up the tank
  • Rugged translucent yellow tank with molded fill-level indicators (in gallons)

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

 

These liquid sprayers are especially suited for maintaining residential and small commercial properties:

  • Provide an excellent way to apply liquid fertilizer
  • Herbicides and pesticides can be applied along with liquid fertilizer or separately

Following are the advantages of using liquid fertilizer over dry fertilizer:

  • More readily available to plants
  • Need not be worked into the soil by watering or rain before it will work
  • Herbicides are more effective when applied with liquid fertilizer

NOTE: Use these sprayers with liquid-base lawn care chemicals only. Not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Compatible with all Gator models except XUV 550, XUV 550 S4, and RSX850i Utility Vehicles.

Ordering information

Contact the local John Deere dealer for availability and pricing information.

 

25-gal. (94 L) portable sprayer
Order number: LP19490


90 Gallon Bed Sprayer - LP20853


90 Gallon High Performance Single Tank Sprayer - LP48006


GatorPal High Pressure Washer (2700 psi, Honda engine) - LPGP2700GH


GatorPal High Pressure Washer (2700 psi, Subaru engine) - LPGP2700GS


GatorPal High Pressure Washer (3000 psi, Honda engine) - LPGP3000GH


GatorPal High Pressure Washer (3000 psi, Subaru engine) - LPGP3000GS


HP Standard Gator Boom - LP22911


High Performance Sprayer Precision Boom (12.5 ft) - LP22885


High performance boomless nozzles - LP22884


Tow-Behind High Performance Sprayer, 45 gal. (170 L), requires LP22884 or LP22885 boom - LP39963


Tow-Behind Sprayer, 45 gal. (170 L) - LP20485


Spreaders

17AT Cart - LPPCT17ATJD


3 cu. ft. Fertilizer Spreader - LP49056


3 cu. ft. Salt Spreader - LP49055


5 cu. ft. Drop Spreader - LP53512


Spreader hitch and controls - LP49057


Storage

Gator Toolbox - LP19886


Label kit for toolboxes (Camo) - BM26219


Label kit for toolboxes (Olive & Black) - BM26218


MOLLE OPS storage panelMOLLE OPS storage panel

Available through OrderZone

 

Special features:

  • Military-grade mounting hardware included
  • Fits device and utility pouches
  • Carries up to 30 lb (13.6 kg) of gear
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


OPS Overhead Organizer - Black - LP93117


Side Opening Toolbox - BM26160


Soft Rear Screen and Organizer - Black - LP93207


Top Opening Toolbox - BM26162


Turn Signals
Front turn signalsFront turn signals
Rear signal lights (taillight protectors not included)Rear signal lights (taillight protectors not included)
Hazards switch (top)Hazards switch (top)
Turn signal switch (right)Turn signal switch (right)
Key features
  • Kit includes:
    • Front/rear turn signals
    • Hazards
    • Backlit switches

NOTE: Not intended for use on public roadways.

Compatibility
  • Compatible with all model year 2011 to current Gator™ XUV825 and XUV825 S4 Utility Vehicles
    • Also requires turn signal light harness kit
  • Compatible with all model year 2011 to current Gator XUV625i, XUV855, and XUV855 S4 Utility Vehicles
    • Also requires turn signal light harness kit
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 Attachment harness required (see below) 
 M (open station) 2
 M (cab, factory installed) 2
 R ---

 

E-spec attachment harness 
2Front attachment harness
Roof attachments harness
Front cab harness 
Rear cab harness 
Dash port harness 

Turn signal light harness kitTurn signal light harness kit

The turn signal light harness kit is required when installing the turn signal light kit.

 

The kit includes the switches and wire harnesses.

 

Compatible with Gator™ HPX, XUV560, XUV550, XUV590i, XUV590i S4, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.


Front turn signalsFront turn signals
Brake lights, taillights, reverse lights, and signal lights (taillight protectors not included)Brake lights, taillights, reverse lights, and signal lights (taillight protectors not included)
Hazards switch (top)Hazards switch (top)
Turn signal switch (right)Turn signal switch (right)
Key features
  • Kit includes:
    • Front/rear turn signals
    • Brake lights, taillights, and reverse lights
    • Hazards
    • Backlit switches

NOTE: Not intended for use on public roadways.

Compatibility
  • Compatible with model year 2017 to 2018 Gator™ XUV825, XUV825 S4, XUV855D, and XUV855D S4 Utility Vehicles
    • This kit also requires the turn signal light harness kit.
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 Attachment harness required (see below) 
 E 1, 2

 

E-spec attachment harness 
2Front attachment harness
Roof attachments harness
Front cab harness 
Rear cab harness 

Winch
2041.2-kg (4500-lb) winch (chassis mounted)2041.2-kg (4500-lb) winch (chassis mounted)
Plug-in remotePlug-in remote
Key features
  • Impressive pulling capacity of 2041.2 kg (4500 lb)
  • Equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities
  • Includes a 3-m (10-ft), water-resistant, plug-in remote for safe distance operation that plugs directly into the glove box
  • 15 m (50 ft) of 5.6-mm (7/32-in.) synthetic rope with hawse fairlead. Synthetic rope does not develop sharp burrs like steel rope and does not store as much potential energy when under load.
  • Ergonomic clutch handle
  • Limited lifetime, 3-year electrical (North America) warranty offered through WARN
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
  • M-spec and R-spec vehicles come from the factory winch ready, and no additional attachment harnesses are required.
  • Requires winch mounting kit to mount the winch either on the chassis or on the front/rear receivers
Electrical harness requirements
XUV835/865 Attachment harness required (see below) 
 E 1

 

E-spec attachment harness 
2Front attachment harness
Roof attachments harness
Front cab harness 
Rear cab harness 
Dash port harness 

 

WARN is a trademark of WARN Industries, Inc.


WARN ProVantage 2041-kg (4500-lb) Winch - BM25170


WARN ProVantage 3500 lb Winch - BM26741


Winch Accessories Kit - BM21392


Wireless Winch Remote - BM26662


Winch Mounting Kit

Winch Bumper Mount Kit (S4) 2041-kg (4500-lb) - BM24643


Winch Receiver Mount Kit (S4) 1587-kg (3500-lb) - BM24764


Winch Receiver Mount Kit (S4) 1587-kg (3500-lb) - BM26746


Winch bumper mount kit (S4) (3500 lb) - BM26743


Winch bumper mount kit (S4) (4500 lb) - BM26745


Windscreen
Protective window and essential organizer all in oneProtective window and essential organizer all in one

Features:

  • Heavy-duty fabric coated for maximum water resistance and repellency
  • Quickly attaches to the OPS with rip-and-grip straps
  • Stows all essentials behind the seat
  • Multiple pockets for added storage
  • Super-clear vinyl windows are cold crack tested to -20°C
  • Rolls up for storage
  • Two-year warranty


Ordering information:
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.


OPS Soft Rear Screen - Camo - LP48000


OPS rear screen on Gator™ XUV 825i (front view)OPS rear screen on Gator™ XUV 825i (front view)
OPS rear screen on Gator XUV 825i S4 (rear view) OPS rear screen on Gator XUV 825i S4 (rear view)

Product attributes

  • Provides additional protection to the operator and passenger
    • NOTE:  Never carry loads in cargo box over load guard
  • Includes headrests for additional comfort with the bench and bucket seats
  • Perforated, black metal screen easily attaches to the side and upper tubes of the OPS with four quick clamps
  • Compatible with the following models:
    • HPX: Model year 2013-current
    • XUV 625i:  Model year 2013-current
    • XUV 825i and 825i S4:  Model year 2013-current
    • XUV 855D and 855D S4:  Model year 2013-current
  • Not compatible with pre-model year 2013 HPX and XUV’s, including 620i and 850D

Windshield
Abrasion-resistant full windshieldAbrasion-resistant full windshield

The abrasion-resistant full windshield features:

  • Quick-clamp mounting system – tool-free installation and removal in seconds
  • Manufactured from super-premium, two-sided Makrolon® AR grade abrasion-resistant polycarbonate
  • Increased ultraviolet (UV) longevity – resists yellowing longer than optical-grade polycarbonate
  • Increased chemical resistance over traditional optical-grade polycarbonate
  • Almost as hard as glass with greater impact strength
  • Bottom portion flips up and secured in place by two ball studs

 

Makrolon is a trademark of Bayer Aktiengesellschaft.


Abrasion-resistant half windshieldAbrasion-resistant half windshield

The abrasion-resistant half windshield features:

  • Quick-clamp mounting system - tool-free installation and removal in seconds
  • Manufactured from super-premium, two-sided Makrolon® AR grade abrasion-resistant polycarbonate
  • Increased ultraviolet (UV) longevity – resists yellowing longer than optical-grade polycarbonate
  • Increased chemical resistance over traditional optical-grade polycarbonate
  • Almost as hard as glass with greater impact strength

 

Makrolon is a trademark of Bayer Aktiengesellschaft.


Glass windshield with wiperGlass windshield with wiper
Glass windshield with wiper (vent open)Glass windshield with wiper (vent open)
Required operator protection system (OPS) switch bankRequired operator protection system (OPS) switch bank

The glass windshield with wiper features:

  • Quick-clamp mounting system - easy installation and removal in seconds
  • Laminated, E-Mark glass
  • The lower section of the windshield seals nicely against the vehicle’s hood to protect occupants from the harshest of elements, it also flips up and secured by rubber straps to allow increased airflow into the passenger area

Requires OPS switch bank (sold separately) to mount switch


Specials

Save $500†

on New John Deere Full-Size Gator UTVs

Offer Duration
July 15, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

0% APR fixed rate for 48 months†

on New John Deere XUV/HPX/RSX Gator UTVs

Offer Duration
August 05, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

0% APR fixed rate for 48 months†

on New John Deere XUV/HPX/RSX Gator UTVs

Offer Duration
August 05, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

3.90% APR fixed rate for 84 Months OR No-Interest if Paid in Full within 12 Months†

on New John Deere Gator UTVs

Offer Duration
August 05, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

Save $750†

on New John Deere Full-Size Gator UTVs

Offer Duration
September 15, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

Save $750†

on New John Deere Full-Size Gator UTVs

Offer Duration
September 15, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
Sarasota

6209 McIntosh Rd
Sarasota, FL 34238
941-924-9709

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group