John Deere 120R Loaders | Everglades Equipment Group

Features

Easily remove and mount loader to and from the tractor without tools

Quik-Park© loader mounting system

The Quik-Park mounting system on the 120R Loader is designed for easy removal and mounting to and from the tractor without tools.

Just like on the former H120, the parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.

Mount to and from the tractor without tools

D120

Parking stands stored in the D120 torque tube

The D120 does not utilize the Quik-Park system as used on the 120R, but rather has two parking stands that are stored within the torque tube for a manual parking process.

Remove the parking stand from the torque tube area and place within the loader foot plate during the parking process (as shown).

Once the loader weight is being supported by the bucket and parking stands, manually remove the pins from the mast assembly and disconnect hydraulics.

Remove the parking pins

Back away from the loader

After installing the parking stands, removing the parking pins and disconnecting hydraulics, simply back away.

D120 Loader on the parking stands

End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points

Pivot pin

Pivot pins shown on the 120R Loader

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.

A nut ensures the pins remain in position.

A lubrication groove provides a path for lubrication.

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Operate with ease and efficiency using the optional field-installed mechanical self-leveling (MSL) loader

Whether the operator is new or experienced to loader operations, it requires skill to maintain an even load and reduce the amount of material lost. With the MSL loader offering for 1 Family, 2 Family, 3D, and 3E Tractors, anyone can operate their loader with ease and confidence. With the MSL loader, you will notice:

Loader implement will maintain position wherever the loader is lifted to
Increased lift capacities
Reduction of material lost during operation
Easy visibility of the bucket level indicator on the right-hand side of the loader boom to help determine the position of the front implement

This loader is the first of its kind in North America for Compact Utility Tractors and can make any loader task easier and quicker to accomplish.

Studio rendering of 1R Tractor with 120R MSL Loader

Pallet fork usage rendering of 1R Tractor with 120R MSL Loader

Specs

Key Specs
Maximum lift height (A)	1828 mm 72 in.
Loader
Lift capacity at full height	Measured at pivot (U) 364 kg 803 lb Measured at 500 mm ahead of pivot (V) 251 kg 553 lb
Boom breakout force	Measured at pivot (Y) 890 kgf 1963 lbf Measured at 500 mm ahead of pivot (Z) 606 kgf 1335 lbf
Bucket rollback force capacity	At maximum height (VV) 648 kgf 1428 lbf At 59-in. (1500-mm) lift height (XX) 777 kgf 1713 lbf At ground-level line (ZZ) 753 kgf 1659 lbf
Key Specs
Clearance at full height - bucket dumped (C)	1304 mm 51.3 in.
Dump angle, degrees (E)	-40.5 degree (angle)
Rollback angle, degrees (G)	30.08 degree (angle)
Tractor
Model	2025R/2026R
Front tire	23x8.50-12 6PR R4 CL
Rear tire	12.00-16.5 6PR R4 CL
Wheelbase	1600 mm
Pump capacity	26.5 L/min
Rated pressure	2146 psi
Loader
Base weight	283.88 kg
Bucket used	Materials 1350 mm
Bucket weight	83 kg 183 lb
Lift capacity at 59 in. (1500 mm)	Measured at pivot (W) 434 kg 957 lb Measured at 500 mm ahead of pivot (X) 312 kg 688 lb
Dimensions	Maximum lift height (A) 1828 mm 72 in. At full height - bucket level(B) 1666 mm 65.6 in. At full height - bucket dumped (C) 1304 mm 51.3 in.
Overall length (I+F), ft (m)	2888 mm 113.7 in.
Digging depth (H)	-86 mm -3.4 in.
Reach	At maximum height (D) 698 mm 27.5 in. At ground level - bucket level (F) 1288 mm 50.7 in.
Bucket angle	Dump angle, degrees (E) -40.5 degree (angle) Rollback angle, degrees (G) 30.08 degree (angle) Dump angle, ground -115.4 degree (angle)
Cycle times	Loader raise, seconds 3.7 seconds Loader lower, seconds 2.6 seconds Bucket dump, seconds 4.1 seconds Bucket rollback, seconds 2.5 seconds

Accessories and Attachments

Ballast

Ballast Box - BW15073

Ballast box

Ballast box with 3E Tractor

A ballast box can be used to carry additional ballast for greater tractor stability.

A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

Ballast box extension

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch.

A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.

Ballast Box Extension - BW15074

Ballast box with extension

The ballast box can be used to carry additional ballast for greater tractor stability. A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch. A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.

The ballast box extension is only available through Parts; it is not a factory option.

Buckets

49 In. (1250mm) Loader Materials Bucket - Quik Change - BW14144

Materials bucket

Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks. The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

There is a quik-change connection for easy on/off.

The round-back design helps material flow when filling or dumping the bucket.

The 1250-mm (49.2-in.) bucket is standard on the 120R Loader for field-installed orders.

For loaders installed out of Augusta, GA on tractors, the base bucket will be the 1350-mm (53-in.) bucket.

It is also compatible with the 220R Loader, as the carrier assembly is the same (but may not cover the width of the model year 2017 2R Series Tractor).

When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.

When the 220R Loader ordered field installed (palletized), the loader ships from Augusta, GA.

For non-model year 2017 2R Tractors, the bucket and other specific configuration items will need to be ordered through Parts (such as mounting frames, and hood guard).

53 In. (1350mm) Loader Materials Bucket - Quik Change - BW14145

Materials bucket

There is a quik-change connection for easy on/off.

When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.

For non-model year 2017 2R Tractors, the bucket and other specific configuration items will need to be ordered through Parts (such as mounting frames, and hood guard).

Hood Guards

Deluxe Hood Guard (1023E, 1025R, 1026R) - BW15901

Deluxe hood guard shown on H120 Loader

The deluxe hood guard protects the front of the tractor while wrapping around the hood for extra added protection. The bolt-on design stays with the tractor when the loader is removed.

The hood guard is fixed and provides full tractor access for regular service.

Standard on 120R Loaders, the hood guard can be ordered for a tractor without ordering a loader.

The deluxe hood guard is the same for both the D120 and 120R Loaders; however, it is only available as field-installed option for the D120 Loaders.

Hood Guard (1023E, 1025R & 1026R Tractors) - BW15900

Hood guard shown on D120 Loader

The hood guard protects the front of the tractor while operating the loader.

The bolt-on design stays with the tractor when the loader is removed.

The hood guard is fixed and provides full tractor access for regular service.

Standard on D120 Loaders, the hood guard can be ordered for a tractor without ordering a loader.

Maximum lift height (A)	1828 mm / 72 in.
Clearance at full height - bucket dumped (C)	1304 mm / 51.3 in.
Dump angle, degrees (E)	-40.5 degree (angle)
Rollback angle, degrees (G)	30.08 degree (angle)

All Equipment

John Deere Equipment

Inventory Reduction Specials

Current Specials

Used Equipment

John Deere 120R

Feature Overview

John Deere 120R

Feature Overview

John Deere 120R

Easily remove and mount loader to and from the tractor without tools

D120

End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points

Operate with ease and efficiency using the optional field-installed mechanical self-leveling (MSL) loader

Ballast Box - BW15073

Ballast Box Extension - BW15074

49 In. (1250mm) Loader Materials Bucket - Quik Change - BW14144

53 In. (1350mm) Loader Materials Bucket - Quik Change - BW14145

Deluxe Hood Guard (1023E, 1025R, 1026R) - BW15901

Hood Guard (1023E, 1025R & 1026R Tractors) - BW15900

Anti -Drop Valve Kit - Bucket Circuit - BW16050

Anti -Drop Valve Kit - Lift Circuit - BW16049

Hoses and Clamp - BW16182

Mounting Frame - BW15898

Anti Spill Kit - BXX10016

Service Locks - BXX10004

Mounting Frame - ALD10025

Mounting Frame - ALD10023

My Cart

Submitting Form... Submitting Form...

Belle Glade

Boynton Beach

Brooksville

Fort Myers

Fort Pierce

Homestead

Immokalee

Largo

Leesburg

Loxahatchee

Naples

North Port

Odessa

Okeechobee

Orlando

Palmetto

Plant City

St Cloud

Submitting Form...
Submitting Form...