John Deere 4044M

DEBUG Ind: Compact Utility Tractors, Cat: Tractors, SubCat: Compact Tractors, SubSubCat: 4 Series Compact Tractors
Feature Overview
John Deere 4044M
  • Powerful and reliable Yanmar Diesel Engine
  • PowrReverser™ or eHydrostatic Transmission options
  • Standard 4-wheel-drive
  • Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

For pricing and additional discounts, see your local John Deere Dealer.

Hitch type Category 1
Steering hydraulics 23.5 L/min / 6.2 gpm
Implement hydraulics 42.3 L/min / 11.2 gpm
Feature Overview
John Deere 4044M
  • Powerful and reliable Yanmar Diesel Engine
  • PowrReverser™ or eHydrostatic Transmission options
  • Standard 4-wheel-drive
  • Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch

For pricing and additional discounts, see your local John Deere Dealer.

Hitch type Category 1
Steering hydraulics 23.5 L/min / 6.2 gpm
Implement hydraulics 42.3 L/min / 11.2 gpm
Features

Attractive styling provides improved visibility and serviceability

4R Tractor 4R Tractor
#

The bold styling of the 4M and 4R Tractors provide an attractive and functional appearance similar to that of the larger agricultural tractors. Benefits of this styling include:

  • Easy tractor family identification
  • Updated fixed grille and side panel hood design allows for optimum sealing of the cooling compartment
    • Front grille slides up to an integrated maintenance position for easy battery access
  • Easily removable cowl, allowing for serviceability access
  • Wraparound-style halogen headlights
    • Premium integrated automotive style headlight bezels
  • Bold graphics
  • Aggressively sloped hood design, giving a softer, smoother look and providing improved visibility
  • Hybrid exhaust in base on cab tractors for clear operator visibility and safety
    • At low speed and when tractor is in a filter cleaning process, exhaust will be routed through vertical exhaust outlet. In all other cases, the exhaust will be routed through the downward exhaust outlet.
    • Side exhaust in base on open operator station tractors and ensures minimal heat impact to operator

The result gives the tractor a distinctive appearance and feel.

NOTE:  If the tractor is equipped with an optional field-installed vertical exhaust, exhaust pipe must be removed before opening and closing the hood of the tractor.


Powerful Yanmar engine Powerful Yanmar engine

The Yanmar diesel engine has a high-torque reserve that provides plenty of power under heavy load.

This 4-cylinder engine features lower levels of exhaust emissions and reduced noise levels. It meets EPA Final Tier 4 (FT4) emission standards.

Model

Number of
cylinders

Engine
displacement

Aspiration

Rated
rpm

Gross engine
hp*

Gross engine ps*

PTO hp

 4044M/R

4

2.2 L

Natural

 2600

42.5

43.1

32.5

4052M/R

4

2.1 L

Turbocharged

 2600

50.8

51.5

39.9

4066M/R

4

2.1 L

Turbocharged

2600

65.0

65.9

52.0

*Engine hp (kW), gross SAE J1995: 43.1 (31.7) at 2600 rpm, PS
Displacement, cu in. (L):134.25 (2.2)
*Engine hp (kW), gross SAE J1995: 51.5 (37.9) at 2600 rpm, PS
Displacement, cu in. (L):128.15 (2.1)
*Engine hp (kW), gross SAE J1995: 65.9 (48.5) at 2600 rpm, PS
Displacement, cu in. (L):128.15 (2.1)

The engine uses the latest technologies to optimize fuel economy, improve control and accuracy, and reduce environmental impact.

The common rail system (CRS) optimizes fuel economy and reduces operating costs*. High-pressure injection atomizes fuel into finer particles which burn more completely. It results in improved fuel economy and lower cost of operation.

The electronic control unit (ECU) provides optimum fuel control and accuracy. ECU monitors and controls the engine. It continuously monitors engine conditions and adjusts the fuel delivery accordingly to ensure optimum performance and emissions.

The new engine comes with an after treatment system. The system operates automatically. The exhaust filter consists of a diesel particulate filter (DPF) which captures particulate matter (PM) contained in the exhaust gas. Using a natural cleaning process, most of the PM trapped in the exhaust filter is eliminated by the heat of the exhaust stream generated by normal use. In situations of low temperature, engine speed or load factor, an active cleaning cycle is initiated. In this cleaning cycle, the exhaust gas temperature is raised by injecting additional fuel during the exhaust stroke of normal vehicle operation to the diesel oxidation catalyst (DOC).

After many hours of use, the exhaust filter may require an ash removal service.

NOTE: *As compared to engines not using CRS technology.

DPF cleaning

Depending on the load that the tractor is under, as well as ambient temperature, humidity, and engine speed, the DPF may build up with particulate matter, thus requiring cleaning. Filter cleaning is determined by one of three conditions:

  • A prescribed time-based estimation of needed filter cleaning
  • DOC/DPF pressure sensors
  • A particulate matter buildup estimation based on load conditions

Once one of the three conditions has been met, filter cleaning will occur.

There are three different types of filter cleaning processes:

  • Passive filter cleaning
  • Active filter cleaning
  • Parked filter cleaning

Passive filter cleaning

Passive filter cleaning occurs naturally when the engine is generating enough heat to oxidize particulate matter. This automatic process occurs continuously during normal operating conditions. No tractor icons or symbols appear on the display during passive filter cleaning.

NOTE: Passive filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

Active filter cleaning

If conditions (temperature, load, or speed) for passive filter cleaning cannot be achieved, then PM is removed using active filter cleaner.

To achieve the required conditions, exhaust temperature management (ETM) manages the initiation and duration of active filter cleaning. ETM can adjust numerous engine parameters and/or inject a small quantity of fuel into the exhaust stream for a short duration. The fuel turns to vapor and chemically reacts with the catalysts in the DOC to create heat to oxidize PM.

It is important to note that at no time is the fuel in the DOC/DPF ignited, and there is no flame within the DOC/DPF.

Like passive filter cleaning, active filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

Parked filter cleaning

In some instances where passive and active filter cleaning have not fully cleaned the PM from the system, a parked filter cleaning may need to take place. Most likely, the only time a parked filter cleaning will need to occur is when automatic filter cleaning has been disabled for an extended period of time and multiple warnings to engage filter cleaning were ignored or if the tractor has been used during light load conditions. Additionally, when the automatic filter cleaning process has been deliberately interrupted multiple times, or if active filter cleaning has failed numerous times due to a failed component, a parked filter cleaning may be requested. In these rare instances the operator will have to park the tractor and start the filter cleaning process.

The parked filter cleaning process needs to be activated based on usage and operation of the tractor. The process will take approximately 30 minutes. See operator’s manual for more details.

This system constantly monitors the soot level of the tractor, making sure the tractor is always in peak performance condition. This ensures high performance at all times.

NOTE:  Number of hours since last regeneration and soot level percentage viewable on LCD display.

Key features of the engine are:

  • Lower rated speed for 540 rpm power take-off (PTO) operation means better fuel economy, less noise and vibration, and longer overall engine life 
  • Cast-in-block cylinder design for good cooling and long life
  • Hydraulic lifters are quieter and require no adjustment
  • Heavy-duty crankshaft provides more bearing surface area for added durability
  • CRS optimizes fuel economy, lowering the cost of operation
  • ECU provides optimum control and accuracy
  • Direct fuel injection
    • Improves starting
    • Injects fuel directly on top of pistons for more efficient combustion
    • Develops more horsepower per gallon of fuel
    • Glow plugs (cold starting aid)
  • Engine oil cooler, cools engine oil for longer engine life
  • Key start and shutoff eliminates fuel shutoff knob
    • Electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
    • Sealed radiator compartment keeps trash and debris on outside of hood
Dry-type air cleaner Dry-type air cleaner
#
  • Dry-type air cleaner with safety element and electronic air service indicator
    • Electronic air restriction indicator alerts operator when air filter servicing is required
    • Dual-element design for added engine protection
    • Easy to service
  • Standard side exhaust
  • Discharges fumes away from the operator, reducing engine noise
  • Improves operator visibility when using a loader or front implement
  • Optional vertical exhaust

Yanmar is a trademark of Yanmar Company Limited.


PowrReverser transmission allows for clutchless direction changes
PowrReverser transmission lever PowrReverser transmission lever

The 12/12 PowrReverser transmission is available on the 4M and 4R Tractors.

The PowrReverser transmission offers a hydraulically shifted forward-to-reverse transmission. This allows for clutchless shuttle shifting between forward and reverse with one lever for quick and easy direction change.

  • PowrReverser transmission does not require the operator to use the clutch to shift between forward and reverse

The PowrReverser transmission features a hydraulically actuated wet clutch. Two multi-disk clutch packs (one forward and one reverse) are hydraulically engaged when the directional (reverser) lever is placed in either the forward or reverse position.

Each clutch pack consists of three large, 5-in. diameter clutch disks that operate in oil and are oil-cooled, allowing excellent heat dissipation and extended clutch life.

Forward/reverse clutches Forward/reverse clutches
  • Clutch A is used for the forward operation of the tractor
  • Clutch B is used for the reverse operation of the tractor

 

Key features of the PowrReverser transmission:

  • 12 forward/12 reverse (12F/12R) speeds
  • Reverser lever, located on the left side of the instrument console, allows the operator to make direction changes without clutching
    • Fast shuttle shift for improved loader operation
  • Dual-cone synchronizers allow for synchronized shifts between gears for on-the-go shifting with the use of the clutch
  • Dual-cone synchronizers permit on-the-go, low-effort shifting between gears
  • Helical-cut gears for quiet operation
Helical-cut gears Helical-cut gears
#
  • Well-spaced speeds for turf, loader, and transport work
  • Neutral start switch prevents tractor from starting when transmission (main range) is not in neutral
  • Dual wet-disk clutches provide long clutch life
  • Shifts between ranges are not synchronized
  • PowrReverser transmission models have both hand and foot throttle controls
  • Especially handy when using a loader

The tractor is available with a three-range electronic hydrostatic (eHydro) transmission.

  • Fluid under pressure transmits engine power to the drive wheels using a pump and motor
  • Functions both as a clutch and transmission
  • Provides high torque for startup
  • Reduces powertrain shock loads

Danfoss® company supplies both the pump and motor. This ensures that the components are matched to each other, providing maximum efficiency.

 

The electronic hydrostatic transmission is ideally suited for jobs where productivity is a must, such as loader or mower applications.

Twin Touch© foot controls allow the operator to select both directions of travel and speed with a touch of the toe.

Key features of the eHydro transmission:

  • Infinitely variable ground speeds, in each range, allow the operator to match the speed of the tractor to the job.
  • No clutching for fast and easy direction changes
  • Twin Touch foot pedals for quick and easy forward/reverse operation
  • Cruise control is optional equipment
    • Cruise control switch is located on the right-hand console for easy access
    • Cruise control is electronically engaged and disengaged, which allows for precise setting of speed
Danfoss eHydro transmission Danfoss eHydro transmission
#

Danfoss eHydro transmission is used for reliable operation. Durability features include:

  • Large forged trunnion shaft with larger support bearings that reduce vibration and noise.
  • Center section made from ductile iron (much stronger than grey iron used in many competitive transmissions).
  • Transmission oil cooler cools transmission oil for longer transmission life.

Safety features of the eHydro transmission include:

  • The tractor will start with one or both foot pedals depressed, but it will not move until both pedals first return to neutral
  • Operator presence - the tractor will come to a stop if the operator leaves the seat but will not shut off unless the power take-off (PTO) is also running
Key John Deere advantage
Twin Touch foot controls Twin Touch foot controls
#

John Deere's Twin Touch foot controls offer several key advantages over competitive hydro model tractors.

  • Some competitive hydrostatic tractors use a treadle pedal (toe-heel) design foot control for operation of the hydro 
    • Requires the operator to use both toe and heel to change direction, resulting in increased operator fatigue
Optional cruise control
Optional cruise control on 4M Tractors Optional cruise control on 4M Tractors
#

 A true-speed cruise control is optional equipment on 4M Tractors with eHydro transmission. Cruise control is electronically engaged and disengaged and is located on the operator console to the right of the operator.

  • Maintains desired forward speed without pressure on the foot pedal
  • Cruise control is set by engaging the switch when the desired speed is reached
  • A speed sensor also allows the tractor to maintain preset speed driving up and down hills
  • To disengage the cruise control, either:
    • Apply pressure to the turn brakes opposite the eHydro pedals
    • Disengage cruise control switch
    • Briefly depress the reverse control pedal
LoadMatch© power management system

LoadMatch is a standard feature on the 4M Series Tractors.

 

If torque requirements increase significantly, the transmission will reduce the tractor's drive speed to compensate for the increased load on the transmission, maximizing torque to drive wheels and minimizing stalls.

 

Controls automatically adjust LoadMatch compensation depending on the tractor’s application. PTO applications require less engine speed fluctuation, therefore adjusting the amount of droop depending on PTO speed. This adjustment increases efficiency and optimizes engine speed and torque output based on tractor application.

 

While typically left on, LoadMatch can be turned off through the center console display.

MotionMatch© system

MotionMatch, standard on the 4M Series Tractors, is adjustable through the center console display. It offers variable adjustments to either lengthen or shorten the rollout when the HST pedal is depressed or released. 

 

Serial number break information

All model year 2016 and newer tractors with serial numbers after those listed below are equipped with LoadMatch and MotionMatch features from the factory

  • 4044M: 1LV4044MCGG100594
  • 4052M: 1LV4052MVGG100273
  • 4066M: 1LV4066MHGG100181

 

For model year 2016 tractors with serial numbers before those listed above and previous model year tractors, these features are available with a machine software update.

 

Danfoss is a trademark of Danfoss Incorporated. 


Addition of optional center console toolbox
Easy entry and exit from the operator's station Easy entry and exit from the operator's station
#

The operator's station is designed for easy entry and exit from the tractor.

Conveniently placed brake pedals, as well as repositioned operator controls, provide for a clean and flat platform design giving the operator plenty of legroom.

  • Hood and fenders are made from impact-resistant polymer material designed to eliminate the possibility of rusting and to resist dents that can occur with metal hoods or fenders.
  • The hood is painted to an automotive-like finish, providing a high-luster appearance with excellent resilience and resistance to fading from sunlight.
Comfortable and convenient design Comfortable and convenient design
#

Key features of the operator's station include:

  • Large grab handles on each fender make getting on and off the tractor easy.
  • Controls are shape and color-coded for easier identification and operation.
  • Optional mechanical suspension seat improves operator comfort and reduces fatigue.
  • A left-side step is in base equipment to enhance access to the operator's station.
  • The mechanical suspension seat gives the operator a comfortable ride. The seat flips forward for protection from the elements.
  • Seat suspension is adjustable for the operator's weight and height.
  • Operator weight adjustment adjusts to the operator’s weight 52 kg to 125 kg (115 lb to 275 lb).
  • The seat is adjustable fore and aft for the operator’s height using the lever located under the seat.
Retractable seat belts Retractable seat belts
#
  • Retractable seat belts prevent belts from becoming tangled in seat suspension and controls

Safety is designed into all 4M and 4R Series Tractors.

  • Operator presence system ensures the operator is in the seat to run the tractor
    • If the operator leaves the seat when front or rear power take-off (PTO) is engaged, the engine shuts down.
    • For stationary PTO work, the tractor must be in neutral and the park brake fully set.
  • The rollover protective structure (ROPS) is designed for operation safety
  • Reflective ROPS strips for better tractor visibility
  • Key switch interlock prevents bypass starting
  • Visual PTO warning light alerts operator when rear PTO is running
  • Placing the transmission in neutral and setting the park brake allows operator to run rear PTO safely when off the tractor seat
  • Turn signal and flashing warning lights operate according to ASAE S279.10 standard
  • Taillights for road transport
  • Slow moving vehicle (SMV) sign for road transport

iMatch Quick-Hitch iMatch Quick-Hitch
iMatch Quick-Hitch with rotary cutter hookup iMatch Quick-Hitch with rotary cutter hookup
iMatch Quick-Hitch (LVB25976) iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976) iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest customer concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 1.93-1.06 cm (0.76-0.77 in.)
    • Outside diameter: 3.15 to 3.43 cm (1.24-1.25 in.)
  • Lower bushings
    • Inside diameter: 2.24 to 2.26 cm (0.88 to 0.89 in.)
    • Outside diameter: 3.63 to 3.66 cm (1.43 to 1.44 in.)

Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.

  • Easy access to regular service points minimizes service time.
  • Easily removable cowl and side panels, improved hood design, and integrated maintenance position on the grille provide easy accessibility for routine maintenance.
  • Tractors are equipped with extensive onboard self-diagnostic capabilities and are fully compatible with John Deere’s exclusive Service ADVISOR© system.
  • Daily service requirements are minimal and simple to accomplish. Most service interval requirements can be performed with a basic understanding of procedures and common tools.
  • Improved cost of ownership
    • Hydraulic oil service interval changed from 400 to 1200 hours (or 3 years) when using Hy-Gard© products 
Removable side panels Removable side panels
Integrated grille maintenance position Integrated grille maintenance position
Removable cowl Removable cowl

All items in the daily service schedule can be performed without the use of tools:

  • Engine oil, hydraulic oil, coolant level, and the water separator can be conveniently accessed
  • The engine can be easily accessed by simply raising the hood for more periodic maintenance checks
  • A single-point latch mechanism and self-contained leash ensure easy hood opening and closure

NOTE:  Always refer to the operator’s manual for complete maintenance and service recommendations.


Specs
Engine
Engine power (gross) SAE J1995 rated power: 31.7 kW
42.5 hp
43.1 PS at 2600 rpm
Power take-off (PTO) power PowrReverser transmission: 25 kWh
33.6 hp
eHydro transmission: 24.1 kW
32.3 hp
Per SAE J1995
Key Specs
Hitch type Category 1
3-point hitch
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb
Transmission
Standard transmission; forward/reverse PowrReverser transmission
Cruise control Optional
Dimensions
Approximate shipping weight (open-station; cab) OOS: 1705 kg
3759 lb
Cab: Not applicable
Wheelbase 185.5 cm
73 in.
Engine
Family EYDXL2.19NDA
FYDXL2.19NDA
GYDXL2.19NDA
Manufacturer Yanmar®
Engine model 4TNV88C-MJT
Rated engine speed 2600 rpm
Final drive
Type Planetary
Engine
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 4 / 2.189 L
4 / 133.5 cu in.
Number of cylinders Four
Cylinder liners Cast-in-block
Bore and stroke 88x90 mm
3.46x3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element
Engine torque at rated speed 116 Nm
85.6 lb-ft
Fuel tank capacity 56.9 L
15 U.S. gal.
Electrical
Battery size 770 CCA
Alternator (12-V) 75 amp
Starter size 2 kW
2.68 hp
Fuel system
Fuel consumption
Transmission
Optional transmission; forward/reverse eHydro transmission
Left-hand reverser PowrReverser transmission only
Transmission gear ranges 12F/12R PowrReverser
Infinitely-variable, three range
Final drive Planetary
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet
Clutch disk diameter wet clutch 129 mm
5.08 in.
Axle capacity Front
1600 kg
3528 lb
Rear
2400 kg
5292 lb
Final drive
Differential lock Yes
Hydraulics
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2 gpm
65.8 L/min
17.4 gpm
Pump type Single gear
Draft control sensing Position control
Remote control valves available Up to six rear remotes
Power take-off (PTO)
Standard Independent
540 rpm at 2600 rpm
Control Position
Clutch Wet disc
Fluid capacities
Crankcase with filter 5.3 L
1.4 gal.
Transmission and hydraulic system 47.3 L
12.5 gal.
Operator station
Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle Flat
Gear shift location - console/floor PowrReverser - Left-hand side
Dimensions
Front axle clearance 35.1 cm
13.8 in.
Turning radius with brakes 2.8 m
9.19 ft
Turning radius without brakes 3.0 m
9.84 ft
Tires
Front Farm - 8-16
Turf - 27x10.5-15 or 27x12LL-15
Industrial - 10-16.5
Rear Farm - 13.6-28
Turf - 44x18-20 or 22.5LL-16.1
Industrial - 16.9Lx24
Front tread range 148.1 cm
58.3 in.
Rear tread spacing 137.2 cm
54 in.
Key Specs
Steering hydraulics 23.5 L/min
6.2 gpm
Implement hydraulics 42.3 L/min
11.2 gpm
Engine
Injection pump type High pressure common rail direct injection
Transmission
Creeper No
Accessories and Attachments
Accessories
Large seat coverLarge seat cover
  • Cushioned seat for extra comfort
  • Fabric coated for maximum water resistance and repellency
  • Elastic cord locks around safety sign on seat back
  • Elastic cord in bottom hem for a custom fit
  • Handy zippered storage case
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Large seat cover
Order number: LP95233


A horn provides audible alert to bystanders.

Allow 20 minutes to install.


Toolbox kit for 4000 TWENTY Series TractorsToolbox kit for 4000 TWENTY Series Tractors

Toolbox is designed for installation on all 4000 TWENTY Series Open-Station and Cab Tractors.

This handy toolbox kit provides easy access and convenient storage for tools.

  • Constructed of steel for durability and long life
  • Dimensions:
    • Length: 19 in. (483 mm)
    • Width: 6 in. (153 mm)
    • Height: 6.2 in. (160 mm)
  • Can be easily removed, if desired
  • Installation time: 1/2 hour
  • Kit includes toolbox and components required for installation. The toolbox can be mounted in one of three locations on the front of the tractor as follows:
    • On the front of the integrated weight bracket
    • In the raised position to permit installation of front weights
    • On the front of the tractor hood guard
Toolbox at front postionToolbox at front postion
Toolbox at raised positionToolbox at raised position
Toolbox on brushguardToolbox on brushguard

3-Point Hitch Tractor Receiver Hitch - LP25001


Drawbar

Tractor Drawbar Assembly - BLV10844


Magnetic hitch pinMagnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

  • Strong magnetic grip
  • Rust resistant
  • Easy to install, secure fit
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768


Engine

Vertical Exhaust Kit (Non Turbo) - BLV10608


Engine coolant heater kitEngine coolant heater kit

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts.

 

NOTE: It is recommended to install optional engine coolant heater, transmission oil heater, and battery heating pad (A22400P - ordered through A and I) if operating machine in temperatures below -18 ⁰C (0⁰F).


Front Weights

Quik-Tatch Weight, 70 lb (32 kg) - LVU32113


Weight kitWeight kit

Rod and pins that allow weights to be bolted together to remain on tractor.


Weight bracket extension installed on a 3120Weight bracket extension installed on a 3120

Can be attached to tractor to allow using up to 12 front weights. Extension kit includes extension bracket, hardware, rod, and pins.

 

Order weights separately.

 

Allow 30 minutes to install.

 

NOTE: Front weights and front hitch are not compatible on same tractor.


Weight bracket extension installed on a 3120Weight bracket extension installed on a 3120

Can be attached to tractor to allow using up to 12 front weights. Extension kit includes extension bracket, hardware, rod, and pins.

 

Order weights separately.

 

Allow 30 minutes to install.

 

NOTE: Front weights and front hitch are not compatible on same tractor.


Front Wheels And Tires

8-16 (6PR, R1 Bar, 2 Position) Front Wheels & Tires - BLV10870


10-16.5 (6PR, R4 Industrial, 2 Position) Front Wheels & Tires - BLV10872


27x10.50-15 (4PR, R3 Turf, 2 Position) Front Wheels & Tires - BLV10874


27x12LL-15 (6PR, R3 Turf Special, 2 Position) Front Wheels & Tires - BLV10876


Hood Guards
#
#

A hood guard with brush screen for 4R Tractors.


#
#

A hood guard with brush screen for 4R Tractors.


Hydraulics

Top and Tilt Field Kit (OOS Only) - BLV10965


Power Beyond Kit (Cab and OOS) - BLV10969


Load Center Assembly (PRT Only) - BLV10498


Dual mid-selective control valveDual mid-selective control valve
#

When ordered with the loader, the tractor is equipped with a loader mounted hydraulic valve.

  • Hydraulic valves have excellent feather ability for smooth operation of equipment
  • Ordered as factory or field-installed option
Optional rear hydraulic couplers - selective control valves (SCVs)

Up to five additional SCVs can be added:

  • Loader-mounted valve
  • Single mid electrohydraulic (EH) SCV
  • Dual rear SCV 
  • Power beyond

NOTE: Power beyond cannot be installed without a D170 Loader.

EH third SCV kit
EH third SCV and power beyondEH third SCV and power beyond
#
  • Contains stackable EH valve, front-mounted couplers, control switch and hydraulic lines (rear tube kit available separately)
  • Provides continuous flow functionality for operating motor driven attachments such as a hydraulic broom
  • Allows routing to the front or back of the tractor, allowing operation of three SCVs in the front and rear of the tractor.
Fourth and fifth rear SCV kit (dual rear SCV)
Fourth and fifth SCVFourth and fifth SCV
Fourth and fifth SCV (dual rear SCV)Fourth and fifth SCV (dual rear SCV)
  • Contains two rear-mounted couplers, hydraulic lines and control levels
  • Provides continuous flow functionality for operating motor-driven attachments such as a hydraulic broom and float function
  • Provides float function
SCV controls
SCV controlsSCV controls
#

Electrohydraulic Third SCV Kit with Rear Tubing - BLV10767


This attachment allows for the installation of the dual mid-valve kit on 4M Tractors. With this kit, 4M Tractors can utilize various implements, such as the 440R Loader, as well as other hydraulically-driven implements. This kit allows the 4M Tractor to operate hydraulically and function similar to the 4R Open-Station Tractors.

 

The kit contains the dual mid-valve, loader joystick, hydraulic lines, and all fittings / hardware that is required.

Dual mid-valve (shown on 4R)Dual mid-valve (shown on 4R)
Hydraulic lines from mid-valve to tractorHydraulic lines from mid-valve to tractor
Two-function joystick (shown on 4R)Two-function joystick (shown on 4R)
Complete kit images
#
#

Available Dec, 2016


Dual mid-selective control valveDual mid-selective control valve
#

When ordered with the loader, the tractor is equipped with a loader mounted hydraulic valve.

  • Hydraulic valves have excellent feather ability for smooth operation of equipment
  • Ordered as factory or field-installed option
Optional rear hydraulic couplers - selective control valves (SCVs)

Up to five additional SCVs can be added:

  • Loader-mounted valve
  • Single mid electrohydraulic (EH) SCV
  • Dual rear SCV 
  • Power beyond

NOTE: Power beyond cannot be installed without a D170 Loader.

EH third SCV kit
EH third SCV and power beyondEH third SCV and power beyond
#
  • Contains stackable EH valve, front-mounted couplers, control switch and hydraulic lines (rear tube kit available separately)
  • Provides continuous flow functionality for operating motor driven attachments such as a hydraulic broom
  • Allows routing to the front or back of the tractor, allowing operation of three SCVs in the front and rear of the tractor.
Fourth and fifth rear SCV kit (dual rear SCV)
Fourth and fifth SCVFourth and fifth SCV
Fourth and fifth SCV (dual rear SCV)Fourth and fifth SCV (dual rear SCV)
  • Contains two rear-mounted couplers, hydraulic lines and control levels
  • Provides continuous flow functionality for operating motor-driven attachments such as a hydraulic broom and float function
  • Provides float function
SCV controls
SCV controlsSCV controls
#

Electrohydraulic Third SCV Kit with Rear Tubing (OOS Only) - BLV10764


Lighting
Shown on 4000 TEN Series TractorShown on 4000 TEN Series Tractor

ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.

For open-station tractors only.

Two guards included in each kit.


#
#
#

An optional premium light kit is available to provide extra visibility when working in dark conditions. The premium light kit includes the following:

  • Two light-emitting diode (LED) fender lights
  • Two LED rollover protective structure (ROPS) work lights (adjustable 360 degrees for forward or rear lighting)
  • One LED rear PTO light

#
#

 Rollover protective structure (ROPS) mounted LED work lights

An optional LED work light kit is available for all open-station compact utility tractors. These lights provide extra visibility when working in dark conditions and have 180-degree rotation to face forward or backward. The kit contains two lights and the mounting hardware required for installation.

This lighting kit is mounted to the warning light brush guard kit, which is mounted to the ROPS and requires attachment BLV10400 for installation.
  
The halogen work light kit attachment is still available (LVB25546).


#

The forward-lighting kit provides extra visibility when working in dark conditions. Lights attach to the brush guards located on the rollover protective structure (ROPS). Each kit contains two lights.

 

NOTE: Requires BLV10400 warning light brush guard kit and LVB26026 light kit harness. Not compatible with LVB25547 rear work light kit (1023E).

 

NOTE: Requires BLV10400 warning light brush guard kit. Not compatible with LVB25547 rear work light kit (1025R, 2025R, 2032R, 2038R, 3025E, 3032E, 3038E, 4105, 4044M, 4052M, 4066M).

 

NOTE: Requires BLV10620 premium warning light brush guard kit. Not compatible with LVB25547 rear work light kit (3033R, 3039R, 3046R, 4044R, 4052R, 4066R).


Rear work lightRear work light

This kit provides light to the rear of the tractor for evening work.

 

For open-station tractors only, this kit contains individual light.

 

Allow 30 minutes to install.

 

NOTE: Kit includes one rear light.

NOTE: Both the rear- and forward-work lights are compatible together and with the light-brush guard kits. The light kit contains a two-to-four pigtail that plugs into the main harness, as if only plugging one set of lights, providing two sets of plugs to use for forward and rear-work lights. The forward light is installed on top of the brush guard, and the rear light is installed inside the ROPS using the bolt holding the light and brush guard on.

NOTE: For 102E3 and 1026R Tractors – kit interference during backhoe operations (mounted inside ROPS) – use LVB25546 forward-light kit as an alternative.


Miscellaneous

Provide added traction in snowy and icy conditions.


Right Hand Mirror Kit - BLV11035


Wheel Spacer Set, 140 mm (each side) - BLV10029


The backup alarm is an audible alarm that informs operator and bystanders when unit is in reverse.

 

For cab and open-station tractors.

 

NOTE: Requires eHydroTM transmission option.


Attaching Hardware for Starter Rear Wheel Weight, 55 lb (25 kg) - LVB25004


Attaching Hardware for Starter Rear Wheel Weight, 110 lb (50 kg) - BM19939


Trailer connector for open-station tractorsTrailer connector for open-station tractors
#

The connector kit is useful for applications where auxiliary power is needed: turn lights, work lights, tail lights, auxiliary power, and chassis ground.

 

NOTE: LVB25960 trailer connector kit for open-station models is backward compatible.


Rear License Plate Kit (Includes Light) - BLV10924


Rear Wheel Weights

Rear Wheel Weight, 48.5 lb - BM17968


Attaching Hardware for Rear Wheel Starter Weight, 45 lb - BM19936


Attaching Hardware for Additional Rear Wheel Weight, 55 lb (25 kg) - BM19937


Attaching Hardware for Additional Rear Wheel Weight, 110 lb (50 kg) - BM19940


Rear Wheels And Tires

Provide added traction in snowy and icy conditions.


Provide added traction in snowy and icy conditions.


Provide added traction in snowy and icy conditions.


13.60-28 (4PR, R1 Bar, 5 Position) - BLV10871


16.90-24 (6PR, R4 Industrial, 2 Position) Rear Wheels & Tires - BLV10873


22.50LLx16.1 (6PR, R3 Turf Special, 1 Position) Rear Wheels & Tires - BLV10877


44x18-20 (4PR, R3 Turf, 1 Position) Rear Wheels & Tires - BLV10875


Three-point Hitch
iMatch Quick-Hitch (LVB25255)iMatch Quick-Hitch (LVB25255)
iMatch Quick-Hitch with rotary cutter hookup (LVB25255)iMatch Quick-Hitch with rotary cutter hookup (LVB25255)
iMatch Quick-Hitch (LVB25976)iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976)iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest customer concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

 

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

 

NOTE: In the picture above, you see the bushing set. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 0.76-0.77 in.
    • Outside diameter: 1.24-1.25 in.
  • Lower bushings
    • Inside diameter: 0.88 to 0.89 in.
    • Outside diameter: 1.43 to 1.44 in.

iMatch Quick Hitch Bushings - LVU12858


iMatch Quick Hitch Bushings - LVU15507


Transmission

Cruise Control Kit - BLV10388


Weights

Quik-Tatch Weight, 42 lb (19 kg) - UC13263


Specials

Order Online for Free Delivery†

on 1, 2, 3, and 4 Series Compact Tractors

Offer Duration
November 01, 2023 - October 31, 2024

More Details On This Offer

Some restrictions apply. Contact us for details.

Order Online for Free Delivery†

on 1, 2, 3, and 4 Series Compact Tractors

Offer Duration
November 01, 2023 - October 31, 2024

More Details On This Offer

Some restrictions apply. Contact us for details.

*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.

Submitting Form...
Submitting Form...


Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Homestead

127 N Krome Ave
Florida City, FL 33034
305-247-9886

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2024 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group