|Steering hydraulics||10.8 L/min / 2.8 gpm|
|Implement hydraulics||13.2 L/min / 3.5 gpm|
|Hitch type||Limited Category 1|
Yanmar is a trademark of Yanmar Company limited.
Both 4WD and power steering are standard equipment on the 1023E. This combination allows for excellent maneuverability and ease of operation of the tractor.
*Features shown are available with all current model year tractors.
Power is provided by a compact and high-performance 3-cylinder Yanmar® TNM Series diesel engine.
This series of engines was developed to meet Tier 4 environmental protection agency (EPA) environmental requirements by featuring low levels of both exhaust and emissions.
Number of cylinders
Gross engine hp (PS)
power take-off (PTO) hp
Dry-type air cleaner with safety element keeps dirt and other contaminants out of the engine
Yanmar is a trademark of Yanmar Company Limited.
The 1023E and 1025R Tractors feature a HST.
Twin Touch foot controls allow selecting both speed and direction of travel with a touch of the toe. Ideally suited for jobs where productivity is a must, such as loader or mower applications.
Transmission has two speeds - Hi and Lo range.
Durability features include:
One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.
NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
|Steering hydraulics||10.8 L/min
|Implement hydraulics||13.2 L/min
|Hitch type||Limited Category 1|
|Lift capacity, 24-in. behind link arms||309 kg
|Air conditioning, temperature differential||NA|
|Approximate shipping weight (open-station; cab)||610 kg
|Front axle clearance||195 mm
|Turning radius without brakes||2.25 m
|Limited slip differential||No|
|Battery size||500 CCA|
|Alternator (12-V)||40 amp|
|Starter size||1.2 kW
|Engine power (gross)||16.5 kW
|Power take-off (PTO) power||10.8 kW
|Rated engine speed||3200 rpm|
|Injection pump type||Indirect Injection|
|Emissions compliance||Final Tier 4|
|Cylinders/displacement||3 / 0.993 L
3 / 60.6 cu in.
|Number of cylinders||Three|
|Bore and stroke||74x77 mm
2.91 x 3.03 in.
|Cooling system||Water pump|
|Air cleaner||Dual element|
|Engine torque at rated speed||49.2 Nm
|Fuel tank capacity||21.2 L
5.6 U.S. gal.
|Crankcase with filter||2.7 L
|Transmission and hydraulic system||14 L
1.4 U.S. gal./hr
|Pump rated output||Steering
|Maximum operating pressure||2150 psi|
|Draft control sensing||Select Control|
|Remote control valves available||Two|
|Rollover protective structure||Type
|Platform - flat/straddle||One-piece semi flat|
|Gear shift location - console/floor||Left Hand Side|
|Power take-off (PTO)|
|Standard||Rear - 540 rpm
Mid - 2100
|Brake (for mid and rear PTO)||Wet disc|
|Front||R4 - 18x8.5-10|
|Rear||R4 - 26x12-12|
|Front tread range||91.8 cm
|Rear tread spacing||89.5 cm|
|Standard transmission; forward/reverse||Hydrostatic - 2 range|
|Final drive||Bull Gear|
|Brakes||Wet disc (left-hand pedal)|
on New John Deere 1 Series Sub-Compact Tractors
May 01, 2019 - July 31, 2019
Some restrictions apply. Contact us for details.