John Deere W52R

Feature Overview
John Deere W52R
  • 52-inch (132-cm) floating mower deck
  • Powerful 18.5 hp (13.8 kW) V-twin engine
  • Self-propelled hydrostatic drive system
  • Easy-to-use controls for operator comfort and convenience
Engine manufacturer/model FS600V - California Air Resources Board (CARB) compliant
Engine power At 3600 rpm 18.5 hp* / 13.8 kW
Mower deck Size 52 in. / 132 cm
Blade tip speed Approximately 18,000 fpm / 5,486 m/min
$7,999.00 MSRP*

Get Financed
Feature Overview
John Deere W52R
  • 52-inch (132-cm) floating mower deck
  • Powerful 18.5 hp (13.8 kW) V-twin engine
  • Self-propelled hydrostatic drive system
  • Easy-to-use controls for operator comfort and convenience
Engine manufacturer/model FS600V - California Air Resources Board (CARB) compliant
Engine power At 3600 rpm 18.5 hp* / 13.8 kW
Mower deck Size 52 in. / 132 cm
Blade tip speed Approximately 18,000 fpm / 5,486 m/min
$7,999.00 MSRP*

Get Financed
We are here to help
Features

Compact design with a strong, welded frame for superior durability

W48R showing compact design, overhead W48R showing compact design, overhead
W52R showing compact design, left W52R showing compact design, left

From the operator's station to the mower deck, John Deere walk-behind mowers have a compact and functional design:

  • Caster wheels are set in as close to the mower as possible.
    • Shortest overall machine length to maximize maneuverability and minimize space needed on a trailer
  • The compact design of John Deere commercial walk-behind mowers allows access to operate in tight areas where larger ride-on machines cannot fit. Often, this means the area can be mowed with a walk-behind mower so it is not necessary to switch to another mower, which helps reduce the time on site.
  • With the compact design of John Deere commercial walk-behind mowers, less space is required on a truck or trailer, possibly freeing up space for an extra mower, resulting in less time on property, saving both time and money.
W61R mower deck, right W61R mower deck, right
W48M Mower W48M Mower

Whether mowing hills or on level terrain, trimming, or mowing straight-away, the operator of a John Deere commercial walk-behind mower is able to control the machine:

  • The compact design makes the machine easier to maneuver.
  • Caster wheels are set close to the blades for most effective ground following capability.
  • Compact design takes less space for mowing tighter areas.
Heavy-duty frame
Mower frame, front Mower frame, front
R Series mower frame, rear R Series mower frame, rear

John Deere commercial walk-behind mowers are designed around a heavy-duty formed and welded steel frame for strength and reliability:

  • Welded frame consists of a combination of tubes and plate steel for a continuous frame that delivers long life
  • Yoke and caster wheel assemblies are built strong for long life
Convenient tie-down locations
Front tie down points Front tie down points
Rear tie down points Rear tie down points
  • Front and rear tie down points are provided to aid in transport.
  • Allows ability to secure straps pulling in opposite directions to keep unit from rolling during transport.
Wheels and tires
Front caster wheel, W48R shown Front caster wheel, W48R shown
Rear drive wheel, W48R shown Rear drive wheel, W48R shown

Large, flat-free front caster wheels and 4-ply rear drive wheels provide smoother operation:

  • Rear tires are sized for the machine and mower width to give optimum deck overhang for trimming performance.
    • Tire size
      • 18x6.5-8 (W36M, W36R)
      • 18x8.5-8 (W48M, W48R, W52R, W61R)
    • Benefits include:
      • Better slope performance
      • Easier to operate over uneven ground
      • Better traction
      • Increased ground clearance
  • Front caster wheels are designed for the best performance.
    • Large, 9x3.5-4 size for good flotation and easy steering
    • Flat-free, semi-pneumatic design for reliability
    • Positioned back close to the mower deck for most effective ground following capability

Air-cooled engine, right front view Air-cooled engine, right front view
Air-cooled engine, left side Air-cooled engine, left side

Powered by an air-cooled, vertical-shaft engine:

  • 14.5 hp (10.8 kW) - W36R
  • 18.5 hp (13.8 kW) - W48R, W52R, W61R
  • 36.8 cu in. (603 cc)
  • Electric start with a large 300 cold-cranking amp (CCA) battery for fast, convenient starts
  • V-twin design for smooth operation and fast starts
    • Consistently strong torque at low- or high-speed operation
  • Aluminum engine block with cast-iron cylinder liners
    • Effectively dissipates heat
  • Lightweight and strong construction
  • Overhead valve design
    • More horsepower and torque per cubic inch of displacement
    • Better fuel efficiency
    • Less oil consumption
    • Cooler operating temperature
  • Full-pressure lubrication with full-flow filter
    • Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
    • Helps keep oil clean for increased engine life
Air cleaner and fin cleanout port access Air cleaner and fin cleanout port access
Cover removed to access engine air filter and cleanout ports Cover removed to access engine air filter and cleanout ports
  • Dual-stage air cleaner for extended engine life and efficient operation
  • Rotating grass chopper screen
  • Cylinder head cleanout ports to ease maintenance
  • Dual element air filter and engine cooling fin cleanout ports are easy to access
  • Complies with U.S. Environmental Protection Agency (EPA) emission standards
Fuel tank and battery
Fuel tank and in-line fuel filter Fuel tank and in-line fuel filter
Battery Battery

Large, 5.4-gal. (20.4-L) top draw fuel tank is easy to fill with large filler opening in an easy-to-reach location.

  • Fuel pump for dependable, consistent operation
  • Top-draw system to reduce the chance for fuel leakage
  • A replaceable in-line fuel filter for trouble-free operation

A powerful, 300-CCA battery is secured and protected from damage in an easy-to-access location.


R Series drive system R Series drive system
M and R Series tracking adjustment knob M and R Series tracking adjustment knob

W36R, W48R, W52R, and W61R Mowers are equipped with an infinitely variable hydrostatic drive system with reverse, which does the following:

  • Provides infinite ground-speed adjustments from 0 mph to 7.5 mph (0 km/h to 12.1 km/h) to meet the mowing application
  • Enables a smoother transition from one speed to another 
  • Gives a reverse speed of 3 mph (4.8 km/h), enabling the operator to back out of tight mowing areas and increase productivity
Wheel motor and steel oil tubes Wheel motor and steel oil tubes
Transmission oil reservoir Transmission oil reservoir

Wheel motors power the rear drive wheels. Steel oil tubes between the pumps and wheel motors are used for maximum reliability.

A transmission oil reservoir is located next to the fuel tank for easy checking.

Sight glass for checking oil level without opening hydraulic system minimizes risk of contamination entering the system.

Replaceable transmission oil filter Replaceable transmission oil filter

The transmission oil filter is a replaceable spin-on type for easy service.


Operator station (R Series shown) Operator station (R Series shown)
Compact control console (R Series shown) Compact control console (R Series shown)

All of the controls are located within comfortable reach of the operator. Simplified operation of each control offers superior convenience, productivity, and safety:

  • Color-coded and clearly marked levers, switches, and buttons enable simplified operation.
  • Bilingual decals in English and Spanish are provided.
  • The operator presence system requires that one of the bails must be depressed to operate the unit; the machine must be in neutral and the power take-off (PTO) must be disengaged to start.
    • Operator presence control levers are recessed into control handle when engaged, provides a smooth contour and comfortable handle to hold during operation.
  • Separate choke and throttle ™ This takes the guesswork out of choke operation, with less chance of fowling the spark plugs.
    • The W61R model with electronic fuel injection (EFI) does not require a choke.
  • Electric PTO clutch on the engine powers the mower deck. The PTO switch on the dash is easy to see and use.
Steering control locked in neutral position Steering control locked in neutral position
Steering levers control speed and direction in use Steering levers control speed and direction in use
  • Speed and steering controls are designed for ease of operation.
  • Ergonomically designed control configuration on all units gives good operator comfort and leverage while driving.
  • A speed-control lever is conveniently located in the center of the console and used to set maximum desired speed.
Operator presence control handle in use Operator presence control handle in use
  • Low actuation force is required for operator comfort.
  • The neutral lock is spring-loaded for easy release.
Electric PTO switch Electric PTO switch
Electric PTO clutch Electric PTO clutch

A convenient and easy-to-operate switch is located on the console to operate the electric clutch, which powers the mower deck.

Parking brake (W36M, W48M)
Parking brake lever, W48M shown Parking brake lever, W48M shown

W36M and W48M parking brake control lever:

  • Color coded and located above the console, within easy reach of the operator
  • Actuates internal braking mechanism of the transmissions
Parking brake (W36R, W48R, W52R, W61R)
Left brake pawl and color-coded parking brake control Left brake pawl and color-coded parking brake control
Right brake pawl, W48R shown Right brake pawl, W48R shown

W36R, W48R, W52R, and W61R parking brake control lever:

  • Color coded and located above the console, within easy reach of the operator
  • Actuates arm that creates a mechanical locking interference on both drive tires
  • Brake pawl located near top of tire to eliminate contact with curbs

Operator presence system Operator presence system
Right speed control lever and neutral lock Right speed control lever and neutral lock

Safety features are designed into M and R Series commercial walk-behind mowers:

  • Before the engine will start, the transmission speed control lever must be locked in neutral, the parking brake set, the power take-off (PTO) disengaged, and the key switch turned to the on position.
  • Left- and right-hand speed/direction control levers are locked in neutral by spring-loaded knobs on the end of control handles.
    • The knob has a finger lever, making it easy to move to the locked position while holding the control lever in the neutral position.
    • The locking knob is spring loaded for easy release of the control levers.
  • Separate choke and throttle ™ this takes the guesswork out of choke operation, and there is less chance of fouling the spark plugs.
    • The W61R has electronic fuel injection (EFI) and does not require a choke control.
  • Color-coded and clearly marked switches and buttons are easy to find.
Parking brake lever (W48R shown) Parking brake lever (W48R shown)
Key switch Key switch
  • Convenient parking brake location
  • The key switch interlock prevents bypass starting
Mower deck shields Mower deck shields
Control panel Control panel
  • Shields are easy to remove and reinstall so they are more likely to be put back on after removal
  • Safety labels
  • Bilingual decals in English and Spanish

2-year bumper-to-bumper warranty

John Deere warranty includes:

  • Single source
  • 24-month coverage
  • Unlimited hours of use
  • Commercial application

All parts, except tires and batteries (which are warranted under separate documents provided with each product), are warranted

Engine service
Engine service points, W48R engine shown Engine service points, W48R engine shown
Engine cleanout port covers and air filter removed, W61R shown Engine cleanout port covers and air filter removed, W61R shown

Engine service points are easy to reach:

  • Oil drain tubes are provided to reduce oil spills and mess.
  • Cleanout ports make inspecting and cleaning engine cooling fins easy.
Durable and adjustable control linkage
Control rods with adjustable ends Control rods with adjustable ends
Plated and adjustable control rods and ends Plated and adjustable control rods and ends

Control rods and ends are plated to stop rust and corrosion:

  • Large pivot points for minimal wear and long life
  • Grease fittings to lubricate for continued smooth operation
  • Adjustable rod ends for easy and accurate adjustments
Control linkage protected when nesting equipment Control linkage protected when nesting equipment

Control linkages are positioned tightly to the main frame structure to protect them from damage, such as being bent that could impact the speed and tracking of the unit.

Transmission service
Transmission oil reservoir, W36M shown Transmission oil reservoir, W36M shown
Replaceable transmission oil filter, W52R shown Replaceable transmission oil filter, W52R shown

Transmission oil reservoirs are easy to access and fill.

The transmission oil filter is a replaceable spin-on type for easy service.

Tow release
Transmission tow-release, M Series design Transmission tow-release, M Series design
Hydraulic bypass valve, R Series design Hydraulic bypass valve, R Series design

Transmission tow valves are easy to find and use.

Convenient tie-down locations
Front tie-down points Front tie-down points
Rear tie-down points Rear tie-down points
  • Front and rear tie-down points are provided to aid in transport.
  • More-rounded corners contribute to a clean, attractive appearance.
  • Greater strength results from eliminating sharp angles where peak loads can cause failure.

W52R mower deck W52R mower deck
W52R mower deck W52R mower deck

John Deere commercial mower decks have always demonstrated quality, performance, and durability. Each commercial walk-behind mower is equipped with a high-quality fabricated mower deck:

  • 10-gauge, 0.135-in. (3.42-mm) fabricated steel deck top with added 10-gauge, 0.135-in. (3.42-mm) spindle mounting plate
  • 7-gauge, 0.19-in. (4.8-mm) side skirts with reinforcement bar

The fabricated, floating mower deck delivers an extremely high-quality cut in diverse conditions:

  • Floating suspension enables the best possible cut.
  • Reinforced front lower edge gives strength and durability.
  • Anti-scalp wheels are double-captured for durability and adjustable to three positions to suit the cut height.
  • Deep-deck design for superior capacity.
  • Side and center anti-scalp wheels promote a smooth mowing job.
Mower deck underside (W48M mower shown) Mower deck underside (W48M mower shown)
Rear mower wheel Rear mower wheel
  • Hardened, high-lift steel blades extend cutting time and increase durability.
  • High blade-tip speed of approximately 18,000 fpm (5,486 m/min).
  • R Series mower decks include a center rear wheel for additional anti-scalp and curb climbing protection.
    • Adjustable to three height positions to suit the cut height
Flexible mower-discharge deflector Flexible mower-discharge deflector
Caster wheels Caster wheels

A high-quality polyethylene deflector gives an excellent finished appearance:              

  • Wide, formed discharge deflector provides even clipping distribution.
  • Large discharge deflector evenly disperses expelled clippings.  

Caster wheels with flat-free tires contribute to a smooth, even cutting job:

  • Large, flat-free caster wheels carry the mower deck smoothly over the lawn.
  • Caster wheels are close to the mower deck to reduce vehicle footprint and turning radius.
    • With the wheels less exposed, there is less chance they will get snagged by immovable obstacles, thus improving maneuverability and reducing chance of damage.
Mower cut-height adjustment
Mower cut-height adjustments Mower cut-height adjustments
Mower cut-height adjustment clip Mower cut-height adjustment clip

A floating mower deck has several advantages over a fixed mower deck design:

  • Follows ground contour more effectively for a more even cut
  • Travels smoothly above the ground with minimal chance of scalping
  • Easier to adjust the cutting height

Mower cutting height can be set from 1.5 in. (3.8 cm) to 4.5 in. (11.4 cm) in 0.5-in. (1.3-cm) increments:

  • The free-floating deck gives a smoother, more level cut.
  • Height-of-cut changes can be made without tools.
  • Large handles are provided to facilitate lifting the mower deck for setting the cut height.
  • Cut-height adjustment pins have 90-degree bend for easy removal and reinstallation.
Mower shields in place (similar W48M shown) Mower shields in place (similar W48M shown)
Easy-to-remove mower deck shields (similar W48M shown) Easy-to-remove mower deck shields (similar W48M shown)

Mower deck shields are easily removed with hand knobs for access to the drive belt and other service points:

  • Easy-attach belt shields allow quick access for service.
  • Four hand knobs allow removal of both mower shields.
  • Greaseable spindles with easy, top access for simplified servicing.
  • Spindle grease fittings can be greased with shields in place.
Optional mulching attachment
Optional mulching kit and blades (similar design shown) Optional mulching kit and blades (similar design shown)

An optional mulching attachment and special mulching blades are available:

  • The high-performance mulching attachment includes formed steel baffles to control the material for superior performance.
  • Special mulching blades can also be used for side discharging, though overall cutting performance may be slightly less than with the standard blades.
Optional grass catcher
Grass catcher door Grass catcher door
Grass catcher installed Grass catcher installed

The grass catcher is designed to work with 36-in. (91-cm), 48-in. (122-cm), and 52-in. (132-cm) Mower Decks on John Deere Commercial Walk-Behind Mowers:

  • Large, 4.4-cu ft (3.5-bu) capacity allows for less stops to empty catcher.
  • No mower faceplate is needed. The catcher connects directly to standard mower deck features.
  • Stainless steel and aluminum construction is both durable for long life and lightweight for easy handing.
  • Convenient sliding door latch enables easy emptying.
  • Two large grab handles provide for easy handling.
  • Catcher weighs about 30 lb (13.6 kg) empty.

NOTE: The optional mulch and grass catcher attachments are not included in base equipment for the commercial walk-behind mower and must be ordered separately.


Optional mulching kit and blades (similar design shown) Optional mulching kit and blades (similar design shown)

An optional mulching attachment and special mulching blades are available:

  • The high-performance mulching attachment includes formed steel baffles to control the material for superior performance.
  • Special mulching blades can also be used when side discharging, though overall cutting performance may be slightly less than with the standard blades.
  • The mulching attachment allows for conversion of the mower deck so it can be used to perform the mulching function (grass or leaves).
Operating tips when mulching:
  • Mow when grass is dry.
  • Observe the one-third rule.
    • No more than one-third of the grass blade should be cut off at one time. This allows more efficient mulching and will promote the continued good health of the grass.
    • If the desired cut height cannot be achieved by cutting off one-third, or there is clumping of the clippings, it may be required to cut higher, wait a day, then lower the mower and make a second pass.
  • Mow at proper intervals, approximately every four to five days.
  • Always mow with sharp blades.
  • Adjust ground speed to allow the mower deck to process the clippings effectively.

Grass catcher door Grass catcher door
Grass catcher installed Grass catcher installed

The grass catcher is designed to work with 36-in. (91-cm), 48-in. (122-cm), and 52-in. (132-cm) Mower Decks on John Deere Commercial Walk-Behind Mowers:

  • Large, 4.4-cu ft (125-L) capacity for less stops to empty catcher.
  • No mower faceplate is needed. The catcher connects directly to standard mower deck features.
  • Stainless steel and aluminum construction is both durable for long life and lightweight for easy handing.
  • Convenient sliding door latch enables easy emptying.
  • Two large grab handles provide for easy handling.
  • Catcher weighs about 30 lb (13.6 kg) empty.

Specs
Key Specs
Engine manufacturer/model FS600V - California Air Resources Board (CARB) compliant
Engine power At 3600 rpm 18.5 hp*
13.8 kW
Mower deck Size 52 in.
132 cm
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Warranty 24 month, single source commercial
Dimensions
Height 44.8 in.
114 cm
Length with deck 74.5 in.
189 cm
Width Deflector down - 66 in.
168 cm
Deflector up for storage - 56 in.
142 cm
Weight 679 lb
308 kg
Drivetrain
Transmission Two Hydro-Gear, 0.73-cu in. (10-cc) hydraulic pumps and Danfoss 12 cu-in. (197-cc) wheel motors and ergonomic handles with spring loaded neutral lock
Wheel motors Danfoss 12 cu in.
197 cc
Shift mechanism Ergonomic handles with spring-loaded neutral lock
Electrical System
Hourmeter Standard, digital
Ignition Electronic spark
Operator presence starting system PTO off, park brake engaged, speed lever in neutral
Engine
Manufacturer/model FS600V - California Air Resources Board (CARB) compliant
Power At 3600 rpm 18.5 hp*
13.8 kW
Displacement 36.8 cu in.
603 cc
Cylinders V-twin
Operating speed 3,600 rpm
Ignition/Starter Electronic/electric start
Valving Overhead valves
Oil filter Standard
Lubrication Full pressure
Governor Flyweight all speed governor
Cooling system Air cooled
Air cleaner Paper element with foam precleaner
Muffler Low tone
Fuel System
Fuel tank capacity 5.4 U.S. gal.
20.4 L
Fuel type Gasoline
Fuel pump Vacuum-operated diaphragm
Fuel delivery system Carburetor
Fuel tank switch/Shut off valve No
Fuel pickup Top draw
Tires
Drive wheels 18x8.5-8
Caster wheels 9x3.5-4 semi-pneumatic
Travel Speed
Speed range Forward, 0-7.5 mph
0-12.1 km/h
Reverse, 0-3 mph
0-4.8 km/h
Forward speeds Infinite
Reverse speeds Infinite
Accessories and Attachments
Miscellaneous
Dual-wheel sulky Dual-wheel sulky
Dual-wheel sulky components Dual-wheel sulky components

An easy-to-install dual-wheel sulky increases the productivity of a W36R, W48R, W52R, or W61R Commercial Walk-Behind Mower. A soft ride is delivered by the pneumatic tires. The large operator platform enables the operator to ride securely and comfortably.

Sulky mounting system and latch Sulky mounting system and latch

This dual-wheel sulky includes a latch so the sulky can be locked in a storage position.

 

Sunbelt Outdoor Products is a trademark of ATI Products, Inc.


Single-wheel sulky Single-wheel sulky
Single-wheel sulky components Single-wheel sulky components

An easy-to-install single-wheel sulky increases the productivity of a W36R, W48R, W52R, or W61R Commercial Walk-Behind Mower. A soft ride is delivered by the pneumatic tire. The large operator platform enables the operator to ride securely and comfortably.

Single-wheel sulky in operating position Single-wheel sulky in operating position
Single-wheel sulky in storage position Single-wheel sulky in storage position

This single-wheel sulky includes a latch so the sulky can be locked in a storage position.

 

Sunbelt Outdoor Products is a trademark of ATI Products, Inc.


Specials

0% APR fixed rate for 48 Months†

on New John Deere Commercial Walk-Behind Mowers

Offer Duration
August 05, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

Save $600†

on New John Deere R Series Commercial Walk‑Behind Mowers

Offer Duration
August 05, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

No Interest, No Payments Until January 2021 Followed by 3.90% APR fixed rate for 48 months†

on new John Deere Commercial Lawn Mowing Equipment

Offer Duration
August 05, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
Sarasota

6209 McIntosh Rd
Sarasota, FL 34238
941-924-9709

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group