John Deere R4038

DEBUG Ind: Agriculture, Cat: Sprayers, SubCat: R4038 Sprayer, SubSubCat:
Feature Overview
John Deere R4038
  • Travel across fields faster with smooth, stable ride
  • 1,000-gallon (3800L) solution tank
  • Travel over hills, wet spots, and soft ground easier with CommandDrive™ all-wheel drive system
  • Enjoy a quieter ride and fuel savings compared to previous models thanks to the CommandDrive™ system
Engine Peak rated power / 231 kW / 310 hp /
Solution system - Capacity 3800 L / 1000 gal.
Boom length options/Material 27.4, 30.4, 36.5, or 40 m / 90, 100, 120, or 132 ft / Boom Material: Steel or carbon fiber
Total weight with widest boom 13,805 kg / 30,435 lb
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Feature Overview
John Deere R4038
  • Travel across fields faster with smooth, stable ride
  • 1,000-gallon (3800L) solution tank
  • Travel over hills, wet spots, and soft ground easier with CommandDrive™ all-wheel drive system
  • Enjoy a quieter ride and fuel savings compared to previous models thanks to the CommandDrive™ system
Engine Peak rated power / 231 kW / 310 hp /
Solution system - Capacity 3800 L / 1000 gal.
Boom length options/Material 27.4, 30.4, 36.5, or 40 m / 90, 100, 120, or 132 ft / Boom Material: Steel or carbon fiber
Total weight with widest boom 13,805 kg / 30,435 lb
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Features

Faster spray and transport speed allow operators to get to the field sooner

Field speeds increased to 40 km/h (25 mph)Field speeds increased to 40 km/h (25 mph)
Road speeds increased to 56 km/h (35 mph)Road speeds increased to 56 km/h (35 mph)

Efficiency and productivity are key drivers to any successful application operation. To meet this need, the R4038 and R4045 have increased spray and transport speeds allowing operators to get jobs done faster and move onto the next field sooner. Operators can now travel 25 percent faster across the field, allowing them to spray more acres per day. Transport speed has also been increased by 16.5 percent, which gets operators to the next field quicker. This translates into a 40 km/h (25 mph) spray speed and 56 km/h (35 mph) road transport speed, boosting overall productivity throughout the day.

 

NOTE: If product is in the solution tank or dry bin, the level sensor inside of the tank or bin will limit machine transport speed to 48.3 km/h (30 mph).

 


Make fewer passes through the field and reduce compaction, as well as time spent spraying, with the optional 36 m (120 ft) boom.

All 27-m (90-ft), 30-m (100-ft), and 36-m (120-ft) booms are more stable thanks to the swing link suspension, which helps translate rough areas in the field into horizontal (side-to-side) movement of the boom rather than lateral (up and down) movement. This additional stability means increased productivity as the boom now has the ability to more accurately maintain spray height above the crop, delivering a precise spray pattern. The swing link suspension also translates into uptime as the additional stability means less crop damage, resulting in less mechanical boom damage.

Finally, the enhanced design allows the boom to unfold and fold faster, getting the operators into the field more quickly, and the flat fold design delivers superior transport visibility.


Solution Command offer push button loadingSolution Command offer push button loading
12-button keypad and micro-display12-button keypad and micro-display

4 Series Sprayers are available with the SCS and have been completely redesigned to allow quick and easy operation at the load station for all operator skill levels. The optional system allows complete automation at the load station with a 12-button keypad. The features include the following:

  • Fill station light on/off
  • Pump on/off
  • Agitation
  • Pump speed increase
  • Pump speed decrease
  • Eductor on/off
  • Master on/off
  • Automated rinse cycle
  • Visual nozzle check
  • Pull-on fill
  • Push-on fill
  • Target fill

The system also features a micro-display, providing real-time feedback on the system operations, as well as ability to select a rinse method and the ability to monitor progress during the automated rinse function. Overall, the enhanced Solution Command System increases operational performance by increasing ease of use through automation at the load station.


The John Deere 4 Series Sprayers have been designed to address the trend toward increased application rates and the desire for improved loading efficiencies. In fact, the R4030, R4038, and R4044 offer the most efficient liquid fertilizer application systems and the fastest loading times that John Deere has ever offered on this size of sprayers to date.

 

The solution system has been redesigned from the ground up to streamline plumbing for maximum efficiency and flow rate. The standard-flow system (standard solution pump and single flow meter) delivers 30 percent higher flow rates than previous models, up to 643.5 L/min (170 gpm) of output. The optional high-flow system offered on the R4038 and R4044 comes complete with a high-flow pump and dual-flow meters and delivers up to a 60 percent increase from previous models, equating to approximately 851.7 L/min (225 gpm) of output.

 

Additionally, load times using the on-board solution pump are up to 30 percent faster. This means operators can get back into the field sooner and spend less time filling. These improvements to the plumbing system all link to enhanced versatility and productivity for operators as they strive to increase the effectiveness of their application passes and drive towards increased yields year over year.


John Deere ExactApply nozzle control
ExactApply nozzle controlExactApply nozzle control

With ExactApply nozzle control, sprayer operators will see an increase in productivity and spray speed ranges, will be able to better manage drift, and will have improved spray quality and precision.

ExactApply offers operators:

  • Individual nozzle control
  • Pulse-width modulation of 15 and 30 Hz
  • Wider speed range while maintaining target rate and pressure
  • Turn compensation
  • Light-emitting diode (LED) lighting
  • Nozzle switching (automatic/manual)
  • Ability to apply liquid nitrogen at wider range of speeds
  • Air induction nozzle compatibility
  • Programmable rates by nozzle/selection (for example, a higher rate behind rear tires)
  • Key fob for nozzle diagnostics
  • Solenoid fault detection

NOTE: ExactApply will be available as a factory-installed option on model year 2018 R4030, R4038, and R4045 Sprayers with stainless-steel plumbing and 38.1- or 50.8-cm (15- or 20-in.) nozzle spacing.

 


Machine performance and operator comfort are requirements during long days of operation. The field-proven dual strut independent wheel air-ride suspension reduces overall machine maintenance. This suspension also provides a best-in-class ride, which is expected from John Deere Sprayers, even in the roughest fields.

 

Additionally, approximately 9 percent of the machine weight has been transferred to the front axle of the R4030, R4038, and R4044, which leads to improved balance and further increases machine maneuverability. These features lead to less operator adjustment in the field and on the road. At the end of the day, a smooth, stable ride allows the operator the ability to travel faster across the field and cover more acres, leading to increased productivity.


4 Series Sprayer operator station4 Series Sprayer operator station

When operators first enter the Command View III cab, they will notice that significant changes have been made. Key sprayer controls are more easily accessible to the operator on the redesigned CommandARM™ control panel and the multifunction handle has a more ergonomic fit and feel.

The multifunction handle has six reconfigurable buttons, a scroll to select speed range, and allows operators to better manage their headlands with the Headland Management System (HMS™) button. To finish out the upgrades, the GreenStar™ display has been upgraded to a faster, more user-friendly 4600 CommandCenter™ display, which allows operators to efficiently capture, manage, and transfer data.

Comfort continues to be enhanced by the ComfortCommand™ seat, which offers both fore-aft and lateral attenuation along with 15 degrees of right-hand seat swivel on all cab options. For first-class comfort, the premium cab offers a heated/ventilated leather seat and light-emitting diode (LED) cab lights.

The 4 Series Sprayers are JDLink™ telematics system capable, which enable features such as John Deere Wireless Data Transfer (WDT), Service ADVISOR™ Remote diagnostics, and Remote Display Access (RDA). These integrated solutions enable additional uptime and reduce cost of operation. All of the CommandView III cab features allow operators to run longer hours, increasing the ability to get more acres sprayed in a day.


Field-installed 511-L (135-gal.) direct-injection systemField-installed 511-L (135-gal.) direct-injection system
Field-installed 889-L (235-gal.) direct-injection systemField-installed 889-L (235-gal.) direct-injection system

As solution tank mixes become more complex, operators need a better way to manage the products they are mixing in helping to reduce the risk of chemical residue. The integrated direct-injection system provides an additional carrying capacity for raw chemicals and allows injection of single, dual, or triple products directly into the boom depending on installed configuration.

 

MachineDirect injection
carrying capacity
Injection capability
R4030/R4038
model year 2015 and older
(serial number 10,999 and lower)
511 L (135 gal.)Inject up to two chemicals
(one high volume, one low volume)
R4030/R4038
model year 2016 and newer
(serial number 11,000 and higher)
889 L (235 gal.) Inject up to three chemicals
(two high volume, one low volume)
R4045889 L (235 gal.)Inject up to three chemicals
(two high volume, one low volume)

NOTE: Low-volume tanks and pumps must be configured with at least one high-volume tank and pump. High-volume tank and pump can be configured by itself.

 

Direct injection helps provide quicker changeovers and faster cleanouts while also helping to minimize the risk of using multiple chemicals. This is accomplished by allowing operators the ability to isolate higher-residual-risk chemicals in the injection system while mixing lower-risk chemicals in the solution tank.

The minimum and maximum application rates for each pump are as follows:

 

Direct injection pump systemHigh-rate pumpLow-rate pump
Application rate range
(minimum to maximum)
148-5900 mL/min (5-200 oz/min)29.6-1183 mL/min (1-40 oz/min)
Agitation capabilityNot available – suspension products not recommendedNot available – suspension products not recommended

 

NOTE: See Operator’s Manual for additional details based on boom size and speed range, and refer to Tools/Direct Inject Calculator within the ApplyPlus mobile app (download via Apple® App Store® or Google Play store).

 

Apple and App Store are trademarks of Apple Inc. Google Play is a trademark of Google LLC.


Connect Mobile actual rate map and pressure map in split screen gives the operator deeper understanding of machine performanceConnect Mobile actual rate map and pressure map in split screen gives the operator deeper understanding of machine performance
Connect Mobile overview

John Deere Connect Mobile is a solution that utilizes an Apple® iPad® tablet in the cab that provides the operator a better understanding of the sprayer’s performance. Connect Mobile documents and displays several sprayer performance attributes, helping the operator monitor and more easily detect problems that can occur while spraying. Connect Mobile also has a common user interface that makes it easy to use between different pieces of John Deere equipment. Once the job is done, the iPad with the spraying data can be utilized to perform basic crop scouting activities in the field.

Spraying attributes

Monitor key performance indicators in map layers and dashboard tiles such as:

  • Actual rate
  • Rate deviation
  • Pressure
  • Ground speed
  • Droplet size
  • Target rate
  • Flow rate
  • Tank volume
  • Productivity
  • Fuel rate
In base equipment

Connect Mobile hardware is factory installed on all model year 2017 and newer R4030, R4038, and R4045 Sprayers, making it easy to get started with Connect Mobile.

 

Learn more about Connect Mobile in the Field and Crop Solutions section within the Precision Ag Technology product line and how it can improve the quality of a spraying job.

 

iPad and Apple are trademarks of Apple Inc.


At the end of the spraying season operators can keep their sprayers working for them by converting them to dry nutrient applicators with the addition of the New Leader® DN456 Dry Spinner Spreader. This conversion can be completed in as little as 4 hours and involves the removal of the wet solution skid and the installation of the dry spinner spreader.

 

The DN456 features a carrying capacity of up 5.6 m3 (200 cu ft) of dry fertilizer and is capable of holding 6.6 tons of fertilizer (not approved for ag lime) with variable rate applications from 34 kg/ha (75 lb/acre) up to 3 ton/acre. The 1.83-m (72-in.) spinner heights allow spread width up to 32 m (105 ft) as it propels material across the pass. This equates to a consistent spread pattern across the field and decreased cost of operation for the 4 Series Sprayers.

 

The DN456 can be ordered with either 304 stainless-steel or 409 painted spreader material, single or dual product bin configuration, with a #4 belt over chain conveyor.

 

New Leader is a registered trademark of Highway Equipment Company.


Make fewer passes through the field and reduce compaction, as well as time spent spraying, with John Deere booms.

 

All John Deere booms are more stable due to the swing link suspension, which helps translate rough areas in the field into horizontal (side-to-side) movement of the boom rather than lateral (up and down) movement. This additional stability means increased productivity as the boom now has the ability to more accurately maintain spray height above the crop, delivering a precise spray pattern. The swing link suspension also translates into uptime as the additional stability means less crop damage, resulting in less mechanical boom damage.

 

The enhanced design allows the boom to unfold and fold faster, getting the operators into the field quicker, and the flat fold design delivers superior transport visibility.


Turn compensation mode Turn compensation mode
Individual nozzle control mode Individual nozzle control mode

John Deere’s intelligent nozzle control system ExactApply helps producers better manage drift and deliver a precise application. By maintaining target rate and pressure over a wider speed range, ExactApply can improve productivity up to 20 acres per hour*.

 

*NOTE: Assumes a 3.2-km/h (2-mph) average operating speed increase.

 

ExactApply is offered as a factory-installed option as well as a performance upgrade kit that can be added to existing 4 Series Sprayer models. 

 

How it works

The ExactApply system features multiple modes of operation including pulse-width modulation (PWM) and individual nozzle control:

  • 15-Hz PWM pulses one solenoid to achieve a consistent droplet size and maintain spray pressure throughout a wider range of speeds and application rates.
  • 30-Hz PWM (combined mode) pulses both solenoids in the ExactApply nozzle body at 15 Hz, providing superior coverage. Combined mode allows ExactApply to have a 25 percent increased flow over current competitive systems in the market.
  • AutoSelect A/B automatically switches between two nozzles to maintain the desired spray pressure range while spraying conventionally.
  • Turn compensation varies the rate across the boom, ensuring the desired application rate. The rate decreases on the inside of the turn to not subject crop to chemical burn, while the rate on the outside of boom increases, ensuring the crop receives the desired application rate.
  • Individual nozzle control minimizes overlap by controlling product application through individual nozzles. This reduces chemical cost and ensures the product is placed where it is needed most. In comparison, traditional nozzle control functions in 11 sections, meaning section widths vary from 2.4 to 3.35 m (8 to 11 ft), depending upon boom width.

 

 

 

 

 


Keep your machines working for you by converting them to dry nutrient applicators with the addition of a New Leader® DN456 Dry Spinner Spreader. This conversion can be completed in as little as 4 hours and involves the removal of the wet solution skid and the installation of the dry spinner spreader.

 

The DN456 features a carrying capacity of up 5.6 m3 (200 cu ft) or 6.6 tons of dry fertilizer (not approved for ag lime) and is capable of variable rate applications from 34 kg/ha (75 lb/acre) up to 3 ton/acre. The 1.83-m (72-in.) spinner heights allow spread width up to 32 m (105 ft) as it propels material across the pass. The New Leader G4 spinner technology provides a consistent spread pattern across the field for uniform pass to pass application.

 

The DN456 can be ordered with either 304 stainless-steel or 409 painted spreader material in single or dual product bin configurations with a #4 belt over chain conveyor.

 

New Leader is a registered trademark of Highway Equipment Company.


4 Series Sprayer operator station 4 Series Sprayer operator station

When operators first enter the Command View III cab, they will notice that significant changes have been made. Key sprayer controls are more easily accessible to the operator on the redesigned CommandARM© control panel and the multifunction handle has a more ergonomic fit and feel.

The multifunction handle has six reconfigurable buttons, a scroll to select speed range, and allows operators to better manage their headlands with the Headland Management System (HMS©) button. To finish out the upgrades, the GreenStar© display has been upgraded to a faster, more user-friendly 4600 CommandCenter© display, which allows operators to efficiently capture, manage, and transfer data.

Comfort continues to be enhanced by the ComfortCommand© seat, which offers both fore-aft and lateral attenuation along with 15 degrees of right-hand seat swivel on all cab options. For first-class comfort, the premium cab offers a heated/ventilated leather seat and light-emitting diode (LED) cab lights.

The 4 Series Sprayers are JDLink© telematics system capable, which enable features such as John Deere Wireless Data Transfer (WDT), Service ADVISOR© Remote diagnostics, and Remote Display Access (RDA). These integrated solutions enable additional uptime and reduce cost of operation. All of the CommandView III cab features allow operators to run longer hours, increasing the ability to get more acres sprayed in a day.


Make fewer passes through the field and reduce compaction, as well as time spent spraying, with John Deere booms.

 

All John Deere booms are more stable due to the swing link suspension, which helps translate rough areas in the field into horizontal (side-to-side) movement of the boom rather than lateral (up and down) movement. This additional stability means increased productivity as the boom now has the ability to more accurately maintain spray height above the crop, delivering a precise spray pattern. The swing link suspension also translates into uptime as the additional stability means less crop damage, resulting in less mechanical boom damage.

 

The enhanced design allows the boom to unfold and fold faster, getting the operators into the field quicker, and the flat fold design delivers superior transport visibility.


Solution Command offer push button loading Solution Command offer push button loading
12-button keypad and micro-display 12-button keypad and micro-display

4 Series Sprayers are available with the SCS and have been completely redesigned to allow quick and easy operation at the load station for all operator skill levels. The optional system allows complete automation at the load station with a 12-button keypad. The features include the following:

  • Fill station light on/off
  • Pump on/off
  • Agitation
  • Pump speed increase
  • Pump speed decrease
  • Eductor on/off
  • Master on/off
  • Automated rinse cycle
  • Visual nozzle check
  • Pull-on fill
  • Push-on fill
  • Target fill

The system also features a micro-display, providing real-time feedback on the system operations, as well as ability to select a rinse method and the ability to monitor progress during the automated rinse function. Overall, the enhanced Solution Command System increases operational performance by increasing ease of use through automation at the load station.


Field-installed 511-L (135-gal.) direct-injection system Field-installed 511-L (135-gal.) direct-injection system
Field-installed 889-L (235-gal.) direct-injection system Field-installed 889-L (235-gal.) direct-injection system

As solution tank mixes become more complex, operators need a better way to manage the products they are mixing in helping to reduce the risk of chemical residue. The integrated direct-injection system provides an additional carrying capacity for raw chemicals and allows injection of single, dual, or triple products directly into the boom depending on installed configuration.

 

Machine Direct injection
carrying capacity
Injection capability
R4030/R4038
model year 2015 and older
(serial number 10,999 and lower)
511 L (135 gal.) Inject up to two chemicals
(one high volume, one low volume)
R4030/R4038
model year 2016 and newer
(serial number 11,000 and higher)
889 L (235 gal.)  Inject up to three chemicals
(two high volume, one low volume)
R4045 889 L (235 gal.) Inject up to three chemicals
(two high volume, one low volume)

NOTE: Low-volume tanks and pumps must be configured with at least one high-volume tank and pump. High-volume tank and pump can be configured by itself.

 

Direct injection helps provide quicker changeovers and faster cleanouts while also helping to minimize the risk of using multiple chemicals. This is accomplished by allowing operators the ability to isolate higher-residual-risk chemicals in the injection system while mixing lower-risk chemicals in the solution tank.

The minimum and maximum application rates for each pump are as follows:

 

Direct injection pump system High-rate pump Low-rate pump
Application rate range
(minimum to maximum)
148-5900 mL/min (5-200 oz/min) 29.6-1183 mL/min (1-40 oz/min)
Agitation capability Not available ™ suspension products not recommended Not available ™ suspension products not recommended

 

NOTE: See Operator’s Manual for additional details based on boom size and speed range, and refer to Tools/Direct Inject Calculator within the ApplyPlus© mobile app (download via Apple® App Store® or Google Play© store).

 

Apple and App Store are trademarks of Apple Inc. Google Play is a trademark of Google LLC.


Connect Mobile actual rate map and pressure map in split screen gives the operator deeper understanding of machine performance Connect Mobile actual rate map and pressure map in split screen gives the operator deeper understanding of machine performance
Connect Mobile overview

John Deere Connect Mobile is a solution that utilizes an Apple® iPad® tablet in the cab that provides the operator a better understanding of the sprayer’s performance. Connect Mobile documents and displays several sprayer performance attributes, helping the operator monitor and more easily detect problems that can occur while spraying. Connect Mobile also has a common user interface that makes it easy to use between different pieces of John Deere equipment. Once the job is done, the iPad with the spraying data can be utilized to perform basic crop scouting activities in the field.

Spraying attributes

Monitor key performance indicators in map layers and dashboard tiles such as:

  • Actual rate
  • Rate deviation
  • Pressure
  • Ground speed
  • Droplet size
  • Target rate
  • Flow rate
  • Tank volume
  • Productivity
  • Fuel rate
In base equipment

Connect Mobile hardware is factory installed on all model year 2017 and newer R4030, R4038, R4044, R4045, and R4060 Sprayers, making it easy to get started with Connect Mobile.

 

Learn more about Connect Mobile in the Field and Crop Solutions section within the Precision Ag Technology product line and how it can improve the quality of a spraying job.

 

iPad and Apple are trademarks of Apple Inc.


Experience fuel saving and noise reduction with CommandDrive Experience fuel saving and noise reduction with CommandDrive

Spray more acres per day at a lower cost of operation with the CommandDrive powertrain. You will see an improved system response to maintain consistent application and transport speeds in challenging conditions, while reducing overall fuel consumption and cab noise.

 

The CommandDrive powertrain comes in base on all R4060, R4045, R4044, R4038, and R4030 Sprayers. This powertrain has the following features:

  • Auto Mode dynamically commands engine speed depending on load requirements
  • Reduce engine speed and save up to 20 percent on fuel consumption
  • 3- to 5-decibel reduction in noise for long hours in the cab
  • Single pump flow instead of two
  • Improved traction control

SpreadStar dry rate control on Gen 4 4600 CommandCenter© display SpreadStar dry rate control on Gen 4 4600 CommandCenter© display

The SpreadStar dry rate control system is a standard feature that is integrated into the design of the self-propelled spreader chassis (not a third-party ISO control add-on) and delivers accurate and consistent on-target rate control. All dry spreading and vehicle functions are displayed on the Gen 4 4600 CommandCenter display for easy operation and setup. In addition to these functions, all precision technology can be used on the same display for complete integration and ease of operation. The engine, chassis, dry spreader system, and precision controllers provide central communication through the display for many vehicle and dry system functions that are simple and easy to use.

 

  • Provides superior rate control, response times, and ease of use
  • Rate control locks on to the desired application rate much more quickly and maintains it better than third-party controllers
  • Easy to understand and simple to set up the key values you must enter to execute the spreading job
    • No cross reference to nodes or a task controller like other third-party systems
  • High-speed hydraulic pulse-width modulated control valve varies conveyor shaft speed to produce only the required product flow with easy-to-follow feed rate calibration procedures

Engine, transmission, and hydraulic drive pump work together to optimize efficiency of the entire system, providing fuel savings and optimizing power to the ground and delivery of product to the spinners


SprayStar spray rate control on Gen 4 4600 CommandCenter© display SprayStar spray rate control on Gen 4 4600 CommandCenter© display

The SprayStar spray rate control system is a standard feature that is integrated into the design of the self-propelled sprayer system (not a third-party ISO control add-on) and delivers accurate and consistent on-target rate control. All spraying and vehicle functions are displayed on the Gen 4 4600 CommandCenter display for easy operation and setup. In addition to these functions, all precision technology can be used on the same display for complete integration and ease of operation. The engine, chassis, solution system, and precision controllers provide central communication through the display for many vehicle and solution system functions that are simple and easy to use.

 

  • Provides superior rate control, response times, and ease of use
  • Rate control locks on to the desired application rate much more quickly and maintains it better than third-party controllers
  • Easy to understand and simple to set up the key values you must enter to execute the spraying job
    • No cross reference to nodes or task controller like other third-party systems
  • High-speed hydraulic pulse-width modulated control valve varies solution pump speed to produce only the required solution flow in coordination with the flow meter and pressure sensor rather than a valve to restrict flow

 

Engine, transmission, and hydraulic drive pump work together to optimize efficiency of the entire system, providing fuel savings and optimizing power to the ground and delivery of product through the solution system to the nozzles


Connected Support technology Connected Support technology

When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly—in the cab or anywhere you are.

John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink© telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.

With your permission, John Deere Connected Support:

  • Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
  • Saves time by remotely viewing in-cab displays, reducing trips to the machine
  • Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
  • Connects experts with the information needed to respond to downtime faster and prevent it altogether

With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.


Specs
Key Specs
Engine Peak rated power
231 kW
310 hp
Solution system - Capacity 3800 L
1000 gal.
Solution system
Rinse tank capacity 454.2 L
120 gal.
Key Specs
Boom length options/Material 27.4, 30.4, 36.5, or 40 m
90, 100, 120, or 132 ft
Boom Material: Steel or carbon fiber
Drivetrain
Spray speed range 0 to 40.2 km/h
0 to 25 mph
Transport speed, maximum 56.3 km/h
35 mph
Europe only - 40 km/h
24.9 mph
Chassis
Suspension Dual-strut independent wheel air-ride suspension
Crop clearance with standard tires 152 cm
60 in.
Key Specs
Total weight with widest boom 13,805 kg
30,435 lb
Engine
Peak rated power 231 kW
310 hp
Emissions Final Tier 4
Number of cylinders 6
Displacement 9 L
549 cu in.
Alternator 200 amp
Fuel tank capacity 605.7 L
155 gal.
Diesel exhaust fluid (DEF) tank capacity 29.5 L
7.8 gal.
Solution system
Capacity 3800 L
1000 gal.
Tank material Stainless steel
Quick fill size 7.6 cm
3 in.
Automatic section control John Deere Section Control (optional)
Solution system control Automatic (optional) or manual
Fill location Side fill, front fill (optional)
Chemical injection method Direct injection (optional)
Chemical eductor Stainless steel
Chemical eductor capacity (size) 32 L
8.5 gal.
Flow meter size 5.1 cm
2 in.
Suction strainer 20 mesh
Pressure strainer 50 mesh
Boom strainer 80 mesh
Boom
Boom length options 27.4, 30.4, 36.5, or 40 m
90, 100, 120, or 132 ft
Automatic boom height BoomTrac Pro - 5 sensor (optional)
Plumbing material Stainless steel (polyethylene optional)
Boom Material Steel or carbon fiber
Ground height adjustment 50 to 245 cm
19.6 to 96.5 in.
Breakaway width Stainless-steel boom - 3.3 m
10.8 ft, in.
Carbon fiber boom - 3.7 m
12.1 ft
Boom sections 13 sections with boom length - 40 m
132 ft
11 sections with boom length - 36.58 m
120 ft
9 sections with boom length - 30.48 m
100 ft
7 sections with boom length - 27.43 m
90 ft
ExactApply™ Nozzle Spacings 15 or 20 in.
Drivetrain
Type Hydrostatic
Drive Full-time four-wheel drive (4WD)
Shifting Electrohydraulic
Hydraulic reservoir capacity 98 L
26 gal.
Chassis
Dry compatible Yes - 5.7 m3
200 cu ft
Front tires 320/90 R46, 380/90 R46, or 420/80 R46
Rear tires 320/90 R46, 380/90 R46, or 420/80 R46
Flotation tires 520/85R38 or 620/70R38 (field installed only)
Hydraulic tread adjust Standard
Wheel tread spacing 305 to 406 cm
120 to 160 in.
Wheel base 430 cm
169.3 in.
Turning radius 8.7 m
28.5 ft
Parking brake Spring-engaged, hydraulic-disengaged wet disk pack
Primary brakes Hydrostatic
Ladder raise/lower Automatic
Total weight with 90-ft boom 13,475 kg
29,707 lb
Total weight with 100-ft boom 13,550 kg
29,873 lb
Total weight with 120-ft boom 13,805 kg
30,435 lb
Total weight with carbon fiber boom 36.6-m (120-ft) boom - 13,304 kg
29,330 lb
40.2-m (132-ft) boom - 13,359 kg
29,451 lb
Options
Air compressor Onboard air (standard)
Foam marker capacity Air injection foamer - 5.7 L
1.5 gal.
Accessories and Attachments
Engine

12V Pump Kit - SWDEF12VKIT


2.5 gal jug of John Deere Diesel Exhaust Fluid - SWDEF025


20gal Portable Dispensing Unit with lockable, hinged lid - SWDEFPDU20T


275gal tote of John Deere Diesel Exhaust Fluid - SWDEF275


330gal tote of John Deere Diesel Exhaust Fluid - SWDEF330


55gal drum of John Deere Diesel Exhaust Fluid - SWDEF055


60gal Portable Dispensing Unit with lockable, hinged lid - SWDEFPDU60T


110V Pump Kit - SWDEF110VKIT


Frame and Chassis

Fire Extinguisher - TY26852


Shield - Underframe Shields - BKK10017


Cold Weather Radiator Screen kit - BKK10270


Air Intake Snorkel Kit - BKK10276


Sprayer Solution System

Front Fill Conversion - BKK10022


Foam Marker System, Air Injection - Single Drop Only - BKK10021


Fence Row Nozzle (Left or Right Side) (Qty. 1) - BKK10289


4 Series Sprayer with direct injection4 Series Sprayer with direct injection
4 Series Sprayer with direct injection4 Series Sprayer with direct injection

Direct injection is available for large 4 Series Sprayers (R4030/R4038/R4045) as a field-installed option. As solution tank mixes become more complex, operators need a better way to manage the products they are mixing in helping to reduce the risk of chemical residue. The integrated direct-injection system provides up to 889 L (235 gal.) of additional carrying capacity for raw chemicals and allows injection of up to two separate products directly into the boom (depending on installed configuration).

 

MachineCarrying capacityMaximum number of chemicals injected
R4030/38 model year 2015 and older (SN 10,999 and lower)511 L (135 gal.)Two-one high volume, one low volume
R4030/R4038 model year 2016 and newer (SN 11,000 and higher)889 L (235 gal.)Three-two high volume, one low volume
R4045889 L (235 gal.)Three-two high volume, one low volume


NOTE:  Low-volume tanks and pumps must be configured with at least one high-volume tank and pump.  High-volume tank and pump can be configured by itself.

The high-volume pump is capable of producing spray rates between 0.15 to 5.92 L/min (0.04 to 1.56 gpm). The low-volume pump can achieve spray rates as low as 0.03 to 1.18 L/min (0.008 to 0.31 gpm).

Fully integrated GreenStar™ (GS) Display
GS display can be set up showing direct injection pump information on right-hand side of the screenGS display can be set up showing direct injection pump information on right-hand side of the screen

Since the large 4 Series Sprayers (R4030/R4038/R4045) are designed to be direct-injection ready, the system is fully integrated with the GS 2630 Display. This means less clutter in the cab due to the elimination of multiple displays as everything is controlled by the GS display. Additionally, direct-injection ready means the electrical architecture of the R4030, R4038, and R4045 is designed for plug-and-play installation. Full integration with direct injection means less downtime and more time spraying in the field.

Model year 2017 direct-injection systems (attachments BKK10302, BKK10303, BKK10304, BKK10305) will have pump-rinse functionality added. Pump-rinse functionality can also be added to a current direct-injection system by adding a three-way inlet valve to each DI pump. The three-way valve connects on one port to the chemical tank for normal operation (injection) and to the clean water rinse tank on the other port (for daily pump rinse).

This feature allows for rinse water to be pulled from rinse tank, through the pump head, and out of the boom mixing chamber. This yields the following benefits:

  • Automatic rinse system, integrated with pump operating modes, cleans chemical out of pump
  • Reduce chemical residual buildup in pump
  • Improved maintenance process, while enabling product to be stored in direct-injection tanks between operation

4 Series Sprayer with direct injection4 Series Sprayer with direct injection
4 Series Sprayer with direct injection4 Series Sprayer with direct injection

Direct injection is available for large 4 Series Sprayers (R4030/R4038/R4045) as a field-installed option. As solution tank mixes become more complex, operators need a better way to manage the products they are mixing in helping to reduce the risk of chemical residue. The integrated direct-injection system provides up to 889 L (235 gal.) of additional carrying capacity for raw chemicals and allows injection of up to two separate products directly into the boom (depending on installed configuration).

 

MachineCarrying capacityMaximum number of chemicals injected
R4030/38 model year 2015 and older (SN 10,999 and lower)511 L (135 gal.)Two-one high volume, one low volume
R4030/R4038 model year 2016 and newer (SN 11,000 and higher)889 L (235 gal.)Three-two high volume, one low volume
R4045889 L (235 gal.)Three-two high volume, one low volume


NOTE:  Low-volume tanks and pumps must be configured with at least one high-volume tank and pump.  High-volume tank and pump can be configured by itself.

The high-volume pump is capable of producing spray rates between 0.15 to 5.92 L/min (0.04 to 1.56 gpm). The low-volume pump can achieve spray rates as low as 0.03 to 1.18 L/min (0.008 to 0.31 gpm).

Fully integrated GreenStar™ (GS) Display
GS display can be set up showing direct injection pump information on right-hand side of the screenGS display can be set up showing direct injection pump information on right-hand side of the screen

Since the large 4 Series Sprayers (R4030/R4038/R4045) are designed to be direct-injection ready, the system is fully integrated with the GS 2630 Display. This means less clutter in the cab due to the elimination of multiple displays as everything is controlled by the GS display. Additionally, direct-injection ready means the electrical architecture of the R4030, R4038, and R4045 is designed for plug-and-play installation. Full integration with direct injection means less downtime and more time spraying in the field.

Model year 2017 direct-injection systems (attachments BKK10302, BKK10303, BKK10304, BKK10305) will have pump-rinse functionality added. Pump-rinse functionality can also be added to a current direct-injection system by adding a three-way inlet valve to each DI pump. The three-way valve connects on one port to the chemical tank for normal operation (injection) and to the clean water rinse tank on the other port (for daily pump rinse).

This feature allows for rinse water to be pulled from rinse tank, through the pump head, and out of the boom mixing chamber. This yields the following benefits:

  • Automatic rinse system, integrated with pump operating modes, cleans chemical out of pump
  • Reduce chemical residual buildup in pump
  • Improved maintenance process, while enabling product to be stored in direct-injection tanks between operation

4 Series Sprayer with direct injection4 Series Sprayer with direct injection
4 Series Sprayer with direct injection4 Series Sprayer with direct injection

Direct injection is available for large 4 Series Sprayers (R4030/R4038/R4045) as a field-installed option. As solution tank mixes become more complex, operators need a better way to manage the products they are mixing in helping to reduce the risk of chemical residue. The integrated direct-injection system provides up to 889 L (235 gal.) of additional carrying capacity for raw chemicals and allows injection of up to two separate products directly into the boom (depending on installed configuration).

 

MachineCarrying capacityMaximum number of chemicals injected
R4030/38 model year 2015 and older (SN 10,999 and lower)511 L (135 gal.)Two-one high volume, one low volume
R4030/R4038 model year 2016 and newer (SN 11,000 and higher)889 L (235 gal.)Three-two high volume, one low volume
R4045889 L (235 gal.)Three-two high volume, one low volume


NOTE:  Low-volume tanks and pumps must be configured with at least one high-volume tank and pump.  High-volume tank and pump can be configured by itself.

The high-volume pump is capable of producing spray rates between 0.15 to 5.92 L/min (0.04 to 1.56 gpm). The low-volume pump can achieve spray rates as low as 0.03 to 1.18 L/min (0.008 to 0.31 gpm).

Fully integrated GreenStar™ (GS) Display
GS display can be set up showing direct injection pump information on right-hand side of the screenGS display can be set up showing direct injection pump information on right-hand side of the screen

Since the large 4 Series Sprayers (R4030/R4038/R4045) are designed to be direct-injection ready, the system is fully integrated with the GS 2630 Display. This means less clutter in the cab due to the elimination of multiple displays as everything is controlled by the GS display. Additionally, direct-injection ready means the electrical architecture of the R4030, R4038, and R4045 is designed for plug-and-play installation. Full integration with direct injection means less downtime and more time spraying in the field.

Model year 2017 direct-injection systems (attachments BKK10302, BKK10303, BKK10304, BKK10305) will have pump-rinse functionality added. Pump-rinse functionality can also be added to a current direct-injection system by adding a three-way inlet valve to each DI pump. The three-way valve connects on one port to the chemical tank for normal operation (injection) and to the clean water rinse tank on the other port (for daily pump rinse).

This feature allows for rinse water to be pulled from rinse tank, through the pump head, and out of the boom mixing chamber. This yields the following benefits:

  • Automatic rinse system, integrated with pump operating modes, cleans chemical out of pump
  • Reduce chemical residual buildup in pump
  • Improved maintenance process, while enabling product to be stored in direct-injection tanks between operation

4 Series Sprayer with direct injection4 Series Sprayer with direct injection
4 Series Sprayer with direct injection4 Series Sprayer with direct injection

Direct injection is available for large 4 Series Sprayers (R4030/R4038/R4045) as a field-installed option. As solution tank mixes become more complex, operators need a better way to manage the products they are mixing in helping to reduce the risk of chemical residue. The integrated direct-injection system provides up to 889 L (235 gal.) of additional carrying capacity for raw chemicals and allows injection of up to two separate products directly into the boom (depending on installed configuration).

 

MachineCarrying capacityMaximum number of chemicals injected
R4030/38 model year 2015 and older (SN 10,999 and lower)511 L (135 gal.)Two-one high volume, one low volume
R4030/R4038 model year 2016 and newer (SN 11,000 and higher)889 L (235 gal.)Three-two high volume, one low volume
R4045889 L (235 gal.)Three-two high volume, one low volume


NOTE:  Low-volume tanks and pumps must be configured with at least one high-volume tank and pump.  High-volume tank and pump can be configured by itself.

The high-volume pump is capable of producing spray rates between 0.15 to 5.92 L/min (0.04 to 1.56 gpm). The low-volume pump can achieve spray rates as low as 0.03 to 1.18 L/min (0.008 to 0.31 gpm).

Fully integrated GreenStar™ (GS) Display
GS display can be set up showing direct injection pump information on right-hand side of the screenGS display can be set up showing direct injection pump information on right-hand side of the screen

Since the large 4 Series Sprayers (R4030/R4038/R4045) are designed to be direct-injection ready, the system is fully integrated with the GS 2630 Display. This means less clutter in the cab due to the elimination of multiple displays as everything is controlled by the GS display. Additionally, direct-injection ready means the electrical architecture of the R4030, R4038, and R4045 is designed for plug-and-play installation. Full integration with direct injection means less downtime and more time spraying in the field.

Model year 2017 direct-injection systems (attachments BKK10302, BKK10303, BKK10304, BKK10305) will have pump-rinse functionality added. Pump-rinse functionality can also be added to a current direct-injection system by adding a three-way inlet valve to each DI pump. The three-way valve connects on one port to the chemical tank for normal operation (injection) and to the clean water rinse tank on the other port (for daily pump rinse).

This feature allows for rinse water to be pulled from rinse tank, through the pump head, and out of the boom mixing chamber. This yields the following benefits:

  • Automatic rinse system, integrated with pump operating modes, cleans chemical out of pump
  • Reduce chemical residual buildup in pump
  • Improved maintenance process, while enabling product to be stored in direct-injection tanks between operation

Direct Injection System Valve Kit for Pump Rinse on Second High Volume Pump - BKK10317


Direct Injection System Valve Kit for Pump Rinse on Low Volume Pump - BKK10318


Direct Injection System Valve Kit for Pump Rinse on First High Volume Pump - BKK10316


Chemical Eductor, Large (Stainless Steel) - BKK10105


Auto boom height-sensing systemAuto boom height-sensing system
#

The BoomTrac Pro auto boom height-sensing system is designed to help make operators more productive by providing the following advantages:

  • Increase application accuracy and efficiency by maintaining a more consistent boom height above the crop; reduce drift and skips
  • Reduce operator fatigue since fewer operations to perform
  • Minimize the likelihood of boom damage, downtime, and repair costs since fewer chances for boom to contact the ground

The five-sensor system can either be factory-installed or installed by the dealer at a later date. The addition of either BoomTrac option will add wiring harnesses, hydraulic components, hardware, and sensors to the machine.


Boom Air Purge Conversion - BKK10023


90 Foot Boom, SS Custom Plumbing 1 In. Stainless Steel Pipe Wet Plumbing with (80) 5-Position Nozzle Bodies - BKK10079


90 Foot Boom, Poly Custom Plumbing 1 In. Poly Pipe Wet Plumbing with (80) 5-Position Nozzle Bodies - BKK10080


120 Foot Boom, SS Custom Plumbing 1 In. Stainless Steel Pipe Wet Plumbing with (100) 5-Position Nozzle Bodies - BKK10075


120 Foot Boom, Poly Custom Plumbing 1 In. Poly Pipe Wet Plumbing with (100) 5-Position Nozzle Bodies - BKK10076


100 Foot Boom, SS Custom Plumbing 1 In. Stainless Steel Pipe Wet Plumbing with (100) 5-Position Nozzle Bodies - BKK10077


100 Foot Boom, Poly Custom Plumbing 1 In. Poly Pipe Wet Plumbing with (100) 5-Position Nozzle Bodies - BKK10078


*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.

Submitting Form...
Submitting Form...


Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Homestead

127 N Krome Ave
Florida City, FL 33034
305-247-9886

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2024 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group