John Deere 160A

DEBUG Ind: Agriculture, Cat: Hay Forage, SubCat: Mowing, SubSubCat:
Feature Overview
John Deere 160A
  • Heavy-duty knife drive and cutterbar for increased reliability
  • Heavy-duty multi-bat reel improves crop flow
  • Adjustable reel-cam track to control crop release
  • Header index ensures optimum platform speeds
Cutterbar - Drive Timed dual knife
Cutterbar - Speed Variable, 1450 - 1900 spm
Augers -�Diameter Single auger: 508 mm / 20 in.
Angled-steel conditioner rolls -��Type Intermeshing steel rolls
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Feature Overview
John Deere 160A
  • Heavy-duty knife drive and cutterbar for increased reliability
  • Heavy-duty multi-bat reel improves crop flow
  • Adjustable reel-cam track to control crop release
  • Header index ensures optimum platform speeds
Cutterbar - Drive Timed dual knife
Cutterbar - Speed Variable, 1450 - 1900 spm
Augers -�Diameter Single auger: 508 mm / 20 in.
Angled-steel conditioner rolls -��Type Intermeshing steel rolls
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Features

Durable steel conditioner rolls for long life

Steel conditioning rollers Steel conditioning rollers
#

The A-Series conditioner rolls are a full 2591-mm (102-in.) wide for crimping performance and ensure thorough conditioning of the plant stem. The use of the steel-on-steel intermeshing roll design ensures that leaves are retained for high protein value, providing high-quality hay, forage, and alfalfa crops. The straight design of these conditioner rolls makes them easy to repair, as damaged sections can easily be cut out and replaced.

 

The rolls are powered by a hydraulic motor with an adjustable speed from 601 rpm to 790 rpm. The steel rolls offer improved wear life, particularly in adverse soil and crop conditions.


Z-shaped cutterbar Z-shaped cutterbar
#

The 100A Windrower Platforms have a twin-knife design.

 

The twin-knife design uses two counter-stroking knives with two sections that overlap in the center of the platform. The advantages of this design are as follows:

  • Reduces cutting loads for increased reliability
  • Easier to remove and handle short knives for normal maintenance
  • Adjustable from 1400 to 1950 strokes per minute for clean cutting at productive ground speeds
  • Counter-stroking reduces vibration

The Z-shaped profile of the cutterbar, along with rectangular reinforcement, improves the durability of the cutterbar along both the horizontal and vertical planes, allowing it to better withstand impact from field obstacles.


Platform reverser controls on W155 Platform reverser controls on W155
#

Platform reverser controls are available for the W155 Self-Propelled Windrower only:

  • Easily activated from operator's station to clear platform of plugs
  • Reverser slowly reverses the knife drive and optional hay conditioner, if equipped, to clear plugs
  • Highly recommended when using optional hay conditioner with 400D Platforms
  • Operators can run machines closer to their maximum capacity and it will take less time to unplug
Reverser valve block Reverser valve block
#

The reverser consists of a valve block and valves, shown in the image above. It is the gold-colored valve block on the right side. It is shown plumbed for a 100A Auger Platform.


Cam track Cam track

The reel cam is easily adjusted to match crop release to varying crop conditions, such as light to heavy crop.

 

Cam-forward reel-tine control reduces the load on bearings and cam track for quieter, smoother operation and longer life. The higher position of the cam itself helps to keep it above the crop and away from debris. The smoother operation allows for operation speeds of up to 13 km/h (8 mph).


Windrow adjustment Windrow adjustment
#

Right-hand and left-hand windrow-forming shields are easily adjusted from the rear of the unit.
 
Independent adjustment of the forming shields gives the operator more control over the windrow formation. This is a simple, no-tool adjustment.
 
The windrow width is adjustable from a narrow, 0.9-m (3-ft) swath to a wide, fast-drying, 2.3-m (7.67-ft) swath, depending on crop conditions.

The rear fluff shield enables further control over the shape of the windrow.


Header index control Header index control
#

The header index adjusts the reel speeds in relationship to the windrower ground speed; the operator can focus on the platform position instead of adjusting the reel speed as the windrower speed changes due to field conditions. The index feature maintains a preselected speed based on the ground speed plus an easily adjusted index number. This ensures that when the operator sets the index, the reel will turn fast enough to ensure proper crop flow.


Drop-out area Drop-out area
#

Located below the auger and in front of the conditioner rolls, the rock-drop opening allows rocks and other obstructions to drop out before reaching the conditioning rolls while still ensuring proper crop flow. The rock-drop feature helps to protect the platform's internal components from damage, which will increase uptime and productivity. It also allows sand, soil, and debris to drop out below the windrow for higher-quality crop and less foreign material in the windrow.


Large 508-mm (20-in.) auger Large 508-mm (20-in.) auger
Poly auger pan Poly auger pan

The 508-mm (20-in.) center-feed augers are positioned over replaceable, high-density polyethylene auger pans. Rubber feed fingers and a direct-mounted hydraulic motor ensure optimum performance.

 

Crop feeding is enhanced by the 100A Platform’s poly feed pan design, progressive feed paddles, and unique stripper bars, which combine to allow for smooth feeding even in adverse conditions. The poly auger pan reduces mud buildup, improves crop flow, and is easier to clean. The poly is longer lasting than other transition pan materials, as well as less susceptible to rock damage. The feed pan is made of two separate bolted-in sheets of poly. This sectional design allows for easier replacement than steel feed pans.

Feed fingers Feed fingers
#

The center-mounted rubber fingers keep crop moving consistently into the conditioner.

 

NOTE: The 160A Grass Seed Windrower Platform does not have a conditioner.


Heavy-duty reel Heavy-duty reel
#

The 100A Windrower Platforms are built to meet the needs of a large producer or commercial hay grower.

Large-diameter, 6.35 mm (1/4-in.) reel teeth are stiff enough to maintain control of the crop from the cutterbar to the augers for even feeding, especially in heavy crop conditions. The teeth nearest to the reel cam are formed to improve crop flow by the reel ends.

The operator can easily control the reel speed from 15 rpm to 85 rpm.

The teeth are designed to lift lodged and tangled material, then draw it against the cutterbar for close, clean cutting in any direction.

Reel bat Reel bat

Reel bats are made of oval tubing. The oval-tube reel bats increase the rigidity and strength of the reel.

The bats are equipped with end caps and remain free from foreign material, reducing unnecessary loads on the reel.

Standard 100A Windrower Platforms feature six bat reels. The 160A Grass Seed Windrower Platforms feature a seven-bat reel.


Specs
Windrower
Compatibility W110 and W150 Windrowers
Key Specs
Cutterbar - Drive Timed dual knife
Cutterbar - Speed Variable, 1450 - 1900 spm
Cutterbar
Knife (chrome) Over-serrated, 9 serrations per inch or 14 serrations per inch available
Key Specs
Augers -�Diameter Single auger: 508 mm
20 in.
Angled-steel conditioner rolls -��Type Intermeshing steel rolls
Dimensions
Platform cutting width 4.95 m
16, 3 ft, in.
Platform overall width 5.41 m
17, 9 ft, in.
Platform weight 2656 kg
5850 lb
Windrow width (depending on crop conditions) 915 - 2540 mm
36 - 100 in.
Windrower
Formation Adjustable swathboard (plus adjustable forming shields on windrower)
Angled-steel conditioner rolls
Drive Hydraulic motor to enclosed gearbox
Speed 601 - 790, variable hydraulic rpm
Cutterbar
Guards Two-tine, double heat treated forged pointed guards, Non-clog guards optional
Hydraulically driven, variable-speed reel
Adjustable Up and down, fore and aft
Tooth bars Six sectioned with regreasable bearings and six reel bats w/ end caps, 7th bat available for dealer inst.
Variable speed 51-85 rpm
Angled-steel conditioner rolls
Diameter 233 mm
9.17 in.
Type Intermeshing steel rolls
Length 2590 mm
102 in.
Key Specs
Augers - Diameter Single auger: 508 mm
20 in.
Angled-steel conditioner rolls -  Type Intermeshing steel rolls
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.

Submitting Form...
Submitting Form...


Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Homestead

127 N Krome Ave
Florida City, FL 33034
305-247-9886

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2024 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group