John Deere 730D

DEBUG Ind: Agriculture, Cat: Harvesting, SubCat: Draper Platforms, SubSubCat: 730d Draper Platform
Feature Overview
John Deere 730D
  • Hydrafloat™ allows the operator to match changing field conditions
  • Dual-knife drive system is timed
  • Cutterbar is closer to the ground
Cutterbar length 9.3 m / 30.5 ft
Pickup reel operating speeds 6-45 rpm / 137.2-cm (54-in.) reel: 5-44 rpm
Draper belts speed control Hydraulic from cab
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Feature Overview
John Deere 730D
  • Hydrafloat™ allows the operator to match changing field conditions
  • Dual-knife drive system is timed
  • Cutterbar is closer to the ground
Cutterbar length 9.3 m / 30.5 ft
Pickup reel operating speeds 6-45 rpm / 137.2-cm (54-in.) reel: 5-44 rpm
Draper belts speed control Hydraulic from cab
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Features

Reel resume and reverse are features on the 700D Drapers

Reel resume and reverse are features on the 700D Drapers. The combine operator can store two different reel positions with one setting for normal conditions and another for down, tangled, short, or leaning crops. 

 

Feature benefit:

  • Added time savings and convenience with saved reel positions, lowering operator fatigue
  • Increased harvest efficiency through a reel-reverse feature that reverses the reel in conjunction with the center feed drum and belt to back out plugs
Draper drum Draper drum
Draper reel Draper reel

The 730D, 735D, and 740D Draper models can be equipped with an integrated, slow-speed transport system.

 

John Deere value:

  • Need for a header trailer is eliminated due to dual-front dolly wheel tires with an extendable tongue and two-gauge wheel tires that can carry the complete weight of the draper when in transport

  • Road transport is quicker and easier because one person can convert the draper from field to transport mode in a few minutes without the use of tools

Theory of operation

In field mode, the dual wheels become the left- and right-hand gauge wheels. For transport, the left-hand dual-dolly wheels support one side of the draper frame and the right-hand dual wheels are repositioned to support the right-hand end of the frame.

 

The transport package includes warning lights, which can be plugged into a seven-way power source for road transport with a 32.2-km/h (20-mph) speed limit for farm equipment transport.

Dual-wheel arm and single-wheel arm assembly Dual-wheel arm and single-wheel arm assembly
Slow-speed transport - rear wheels Slow-speed transport - rear wheels

NOTE: The 730D, 735D, and 740D Drapers are equipped with two ST215/75R14 gauge wheel tires as base equipment and four ST215/75D14 gauge wheels with the low-speed transport option.


All John Deere 700D Drapers include a double-cut knife which features a hydraulic tilt that is controlled from inside the cab. All 10.6-m (35-ft) and 12.1-m (40-ft) draper cutterbars have knifeback reinforcement straps to strengthen the knifeback.

 

Feature benefit:

  • Maximized productivity through longer stroke of knife section provides a faster, cleaner, and smoother cut, which allows operators to harvest at faster ground speeds
  • Productivity is maximized in tough conditions through a reinforced knifeback that strengthens the cutterbar
  • Reduced cost of operation and increased wear life with hardened sickle sections and unique boron treatment
  • Hydraulic tilt optimizes the cutterbar angle for varying conditions, extending the harvest day and providing the lowest-possible cut height
Double-cut cutterbar system Double-cut cutterbar system
Double-cut rock guard Double-cut rock guard
Functionality

The 100-mm (4-in.) cutting action produces a cleaner cut versus the tearing effect of shorter-stroke cutting systems. Knife hold-downs are easily adjusted to help maintain harvesting performance.

Tilt cylinder Tilt cylinder

The cutterbar hydraulic tilt adjusts a full 8 degrees while maintaining excellent visibility to the cutterbar throughout the tilt range. For improved ease of use, the hydro handle can be configured to control the platform tilt.


Cutterbar epicyclical gearcase Cutterbar epicyclical gearcase
Knife drive shaft Knife drive shaft

The unique dual-knife drive system is timed, creating the smoothest-possible reciprocating knife-drive system currently in the industry. The positive, reliable shaft-driven dual epicyclical in-line knife drives with built-in driveline protection, provide operators with the strongest knife-drive system.


The center feed drum is designed for efficient and consistent feeding of the crop into the combine feederhouse. Beginning with model year 2020 700D Draper Platforms, customers will have the ability to choose between a 356-mm (14-in.) or 406-mm (16-in.) center feed drum to be factory installed.

Feature benefit:

  • 356-mm (14-in.) or 406-mm (16-in.) diameter factory-installed feed drum significantly improves feeding of the crop
  • Strategic location improves crop handling and capacity, increasing productivity in high-volume crops such as irrigated wheat, barley, or canola
  • Combine performance is improved due to retractable fingers that enable smoother feeding
  • Capacity increase in tough conditions by 20 percent due to an upgraded center feed section slip clutch
Center feed drum Center feed drum
Feed drum retractable auger finger Feed drum retractable auger finger

Functionality:

 

The feed drum protrudes forward from the draper back sheets, improving the crop handoff from the draper side belts. An increase in slip clutch torque of the center feed drum from 1200 Nm to 1650 Nm allows for increased capacity in tough crop conditions

 

In some crop conditions, crop can hesitate at the corners of the feed drum but the retractable drum fingers keep the crop moving into the combine.


The center feed drum is designed for efficient and consistent feeding of the crop into the combine feeder house. Beginning with model year 2020 700D Draper Platforms, customers will have the ability to choose between a 356-mm (14-in.) or 406-mm (16-in.) center feed drum to be factory installed.

Feature benefit:

  • 356-mm (14-in.) or 406-mm (16-in.) diameter factory-installed feed drum significantly improves feeding of the crop
  • Strategic location improves crop handling and capacity, increasing productivity in high-volume crops such as irrigated wheat, barley, or canola
  • Combine performance is improved due to retractable fingers that enable smoother feeding
  • Capacity increase in tough conditions by 20 percent due to an upgraded center feed section slip clutch
Center feed drum Center feed drum
Feed drum retractable auger finger Feed drum retractable auger finger

Functionality:

 

The feed drum protrudes forward from the draper back sheets, improving the crop handoff from the draper side belts. An increase in slip clutch torque of the center feed drum from 1200 Nm to 1650 Nm allows for increased capacity in tough crop conditions

 

In some crop conditions, crop can hesitate at the corners of the feed drum but the retractable drum fingers keep the crop moving into the combine.


Specs
Top auger
Type Optional: hydraulic drive
Cutterbar
Length 9.14 m
30 ft
Knife drive Base: dual knife
Optional: single
Knife speed 490 cycles/min
Cutterbar tilt Base: hydraulic, maximum tilt 9 degree (angle)
Pickup reel
Number of slats Base: six bat poly
Optional: eight bat steel (for forage conditions)
Fingers Base: nylon
Optional: steel
Feed drum
Diameter Two factory-installed options: 356 or 406 mm
14 or 16 in.
Feed drum not included with SPW configuration
Pickup reel
Height control Hydraulic
Draper belts
Speed control Hydraulic from cab
Pickup reel
Reel lift Cylinder stroke: 330 mm
13 in.
Total range: 391.5 mm
15.4 in.
Reel fore and aft Cylinder stroke: 359 mm
14.1 in.
Total range: 620 mm
24.4 in.
Reel resume Base
Reel reverse Base
Operating speeds 6-54 rpm
Draper belts
Width Rubber coated polyester with V-Guide tracking: 0.7 L
24 oz
Side belts: 1.02 m
3.33 ft
Center belts: 1.4 m
4.583 ft
Center belt not included with SPW configuration
Clean height 25.4 mm
1 in.
Feed drum
Operating speed 195 rpm
Draper belts
Center belt reverse Base: center belt not included with SPW configuration
Feed drum
Feed drum fingers Heavy-duty and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.
Number of fingers 18
Auger finger platform Dual chevron, retracting
Finger reach 152 mm
6 in.
Drum/auger reverse Base
Center clean out door Base
Header height sensing
Header height sensing on the ground Base
Header height sensing off the ground Base
Dimensions
Platform length 10.0 m
32.9 ft
Overall operating depth 2.5 m
8.2 ft
Transport width, field position 9.9 m
32.5 ft
Transport width on wheel, less dividers 2.7 m
8.9 ft
Transport length, hitch extended 12.3 m
40.4 ft
Weight
Approximate weight (pickup reel) Combine only 3,109 kg
6,855 lb
SPW only 2,509 kg
5,532 lb
Approximate weight (with transport) Combine only 3,286 kg
7,245 lb
SPW only 2,686 kg
5,922 lb
Key Specs
Cutterbar length 9.3 m
30.5 ft
Pickup reel operating speeds 6-45 rpm
137.2-cm (54-in.) reel: 5-44 rpm
Draper belts speed control Hydraulic from cab
Pickup reel
Operating speeds (54-in. reel) 5-44 rpm
Draper belts
Cleat height 25.4 mm
1 in.
Feed drum
Center cleanout door Base
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.

Submitting Form...
Submitting Form...


Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Homestead

127 N Krome Ave
Florida City, FL 33034
305-247-9886

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2024 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group