John Deere XUV590M

Feature Overview
John Deere XUV590M
  • Four-wheel independent suspension for excellent ride and handling
  • Balanced acceleration and top speed
  • Quiet and comfortable operator station
Engine power 23.8* kW / 32 hp
Front suspension Fully independent dual A-arm with adjustable coil-over shocks, 203 mm (8 in.) travel, anti-roll bar
Rear suspension Fully independent with lower A-arm and upper camber link with adjustable coil-over shocks, 203 mm (8 in.) travel
$12,799.00 MSRP*
Get Financed
Feature Overview
John Deere XUV590M
  • Four-wheel independent suspension for excellent ride and handling
  • Balanced acceleration and top speed
  • Quiet and comfortable operator station
Engine power 23.8* kW / 32 hp
Front suspension Fully independent dual A-arm with adjustable coil-over shocks, 203 mm (8 in.) travel, anti-roll bar
Rear suspension Fully independent with lower A-arm and upper camber link with adjustable coil-over shocks, 203 mm (8 in.) travel
$12,799.00 MSRP*
Get Financed
We are here to help
Features

Delivers quick acceleration and provides a top speed of more than 77 km/h (48 mph)

586-cc (35.8-cu in.) gasoline engine 586-cc (35.8-cu in.) gasoline engine
Radiator Radiator

The Gator© XUV590E and XUV590M Crossover Series Utility Vehicle is powered by a 586-cc (35.8-cu in.), inline twin-cylinder, electronic fuel-injected (EFI) gasoline engine. The engine is electronically controlled through an engine control unit (ECU) to ensure optimal engine performance.

 

The engine offers the following performance and reliability features:

  • 23.8 kW (32 hp*) at 5600 rpm
  • 77 km/h (48 mph) top speed
  • Electronic fuel injection (EFI) with engine control unit (ECU)
  • Liquid cooled
  • Designed for cold-weather starting (tested to -28.9°C [-20°F])
  • Wet-sump lubrication system
  • Spin-on oil filter and oil pan drain accessible through skid plate for easy servicing
  • High air-flow air filter
  • 875-W (65 maximum amp) charging system for accessory capability (see engine section for alternator output curve)
  • Spark-arresting muffler is United States Forest Service (USFS) approved
  • Low fuel consumption and large 28-L (7.4-U.S. gal.) fuel tank
  • Environmental Protection Agency (EPA) and California Air Resources Board (CARB) compliant

 

* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.


Instrument panel and backlit switches Instrument panel and backlit switches
Sealed under-hood storage Sealed under-hood storage
Ergonomically placed controls Ergonomically placed controls
In-dash cup holders and sealed glove box In-dash cup holders and sealed glove box
S4 optional under-seat storage S4 optional under-seat storage
  • Display features include:
    • Speed
    • rpm
    • Fuel
    • Mechanical front-wheel drive (MFWD)/rear diff-lock
    • Gear position
    • Hour meter
    • Service interval warning light
  • Operator-centric design provides class-leading ergonomics and comfortable seats
    • Easy entry/exit and pass through for operator and passenger
    • Optimal seating position provides more legroom
    • Automotive-like ergonomics
    • Excellent comfort while driving
  • Best-in-class sealed storage volume of 34 L (9 gal.) with a large in-dash glove box and under hood storage. An additional 34 L (9 gal.) of under-seat storage is available on the S4 models.
  • Hinged hood rotates open without tools for access to storage
  • Side-by-side seating provides ample room for one operator and one passenger
    • Seats tilt forward for ease of service and to keep dry during outdoor storage
  • Two cup holders are located within reach of the operator's station
  • Standard 12-V direct current (VDC) outlet is conveniently located on the instrument panel
  • Seven predrilled dash switch locations with snap out caps for various electrical accessories
  • Occupant protective structure (OPS) with three-point seat belts and passenger side grab handle located on front post
  • Start in gear, neutral, or park position for quick starting. The service brake must be engaged to start when in gear, neutral, or park.

The cargo box consists of a high-density polyethylene copolymer composite material that eliminates rust, dents, and reduces noise. This large, one-piece design has rounded inside corners to ensure material removal when tilted. The composite box is highly ribbed and supported with a welded, steel-ladder structure to ensure hard-driving performance and longevity. The three highly styled exterior pieces are made of TPO for extra durability.

Cargo box tailgate
Tailgate handle Tailgate handle
Tailgate pivot and removal feature Tailgate pivot and removal feature
Removable lanyards Removable lanyards

The tailgate can be opened or removed for easier cleanout and to carry longer items. It features truck-like performance and can be operated with one hand.

The tailgate’s pivot point is made of hardened steel for durability and designed for tool-free removal. The standard lanyards can also be disconnected without tools to remove the tailgate for convenient loading and unloading tasks.

Cargo box tilt and removal
Integrated handle for manual cargo box tilt (both sides) Integrated handle for manual cargo box tilt (both sides)
Tilted cargo box Tilted cargo box

The cargo box ease of use is critical to performing tasks quickly and efficiently. Starting with the truck-style tailgate, the removal of content in this cargo box could not be easier. The manual release also functions as the lift lever, done in a smooth, one-step motion. It can even be tilted from both sides of the vehicle. To reduce the overall effort of lift, the pivot point of the cargo box is closer to the center. The combination of easy-to-use attributes makes this cargo box best-in-class.

For servicing the vehicle’s systems, the cargo box is easily removable. With the removal of two bolts, the cargo box can easily be detached from the vehicle frame.

Integrated tie-down points
Integrated tie-down point in cargo box bed Integrated tie-down point in cargo box bed
Additional tie-down points Additional tie-down points

The cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:

  • Flip-up D-shaped rings in all four corners inside the cargo box bed
  • Multiple points along the edge of the cargo box side walls
  • Tie-down bars on either side of the cargo box with optional cargo box rail kit. This kit also provides a mounting system using accessories that possess the 25.4-mm (1-in.) quick clamp.
Optional accessories
Cargo box rail system Cargo box rail system
Box mat Box mat
Cargo box wall extensions (shown on RSX) Cargo box wall extensions (shown on RSX)

Optional accessories for the cargo box include (see price pages or JDConfigurator for complete list):

  • Cargo box rail system
  • Cargo box mat
  • Cargo box wall extensions
  • Spare tire rack
  • Bucket holder
Specifications
Length  82 cm (32.3 in.)
Width 120.9 cm (47.6 in.)
Depth 29.7 cm (11.7 in.)
Volume 0.25 m3 (8.9 cu ft)
Weight capacity 227 kg (500 lb)
Dump angle
Bed height (from ground)
 

45 degrees

76.3 cm (30 in.)

CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.


XUV front suspension detail XUV front suspension detail

To complement the comfortable operation station, the XUV560 and XUV590 Series are equipped with four-wheel independent suspension. This unique suspension set-up provides an unparalleled ride over challenging terrain and excellent handling through corners.

 

The engineering team, in collaboration with engineering firms that consult with Formula 1®, NASCAR®, and INDYCAR® teams, built a capable suspension system for class-leading operator comfort no matter what the terrain.

Dual A-arm front suspension features include:
  • Dual, wide arch A-arm design provides maximum front-wheel control, precise steering, and maximum ground clearance out to the wheel
  • 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
  • Adjustable coil-over shocks absorb the most demanding terrain
  • Solid anti-roll bar with fully rubber isolated connecting links and pivots is tuned to provide the most agile and predictable handling
  • Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
  • Increasing vehicle width during compression for additional stability.
  • High-strength ASTM 80-55-06 ductile cast-iron knuckle and upper A-arm to support the high stresses of the shocks, constant-velocity (CV) shaft, and wheels
  • Automotive-style, fully boxed and welded, high-strength steel, lower A-arms to minimize unsprung mass and maximize strength
  • Maintenance-free, rubber torsional A-arm pivots for long life and quiet operation
  • CV shaft protection from sticks that may puncture the rubber boot
  • Anti-dive front suspension geometry provides a solid platform for confident braking
  • Optimized steering geometry using ADAMS CAR simulation to minimize steering effort and maximize terrain feedback
XUV rear suspension detail XUV rear suspension detail
Independent rear suspension features include:
  • 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
  • Unique, independent rear-suspension design ensures a great ride and protection for the CV shafts
  • Adjustable coil-over shocks absorb the most demanding terrain
  • Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
  • Increasing vehicle width during compression for additional stability.
  • High-strength ASTM 80-55-06 ductile cast-iron knuckle, lower A-arm, and upper link to support the high stresses of the shocks, CV shaft, and wheels with the toughness to survive impacts from boulders
  • Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
Optional Fox© Shocks are available to factory install

Exclusive aluminum-body, high-pressure monotube FOX racing shocks

  • Fully adjustable spring preload for different driving styles
  • High-pressure nitrogen gas is separated from the damping oil by an internal floating piston (IFP). The separation prevents aeration (frothing) and viscosity degradation of the oil which improves damping consistency and performance fade.
  • Pressure and heat generation in the monotube is less than a traditional twin-tube shock, allowing for better vehicle control in aggressive conditions.
  • The single aluminum shell of the monotube design allows for more efficient heat rejection and lower overall unsprung mass.
  • Mounting the shaft end of the shock to the suspension arm lowers the unsprung mass of the suspension system, leading to improved suspension response.

NASCAR is a trademark of NASCAR. INDYCAR is a trademark of Brickyard Trademarks Incorporated. Formula 1 is a trademark of Formula One Licensing BV, a Formula One Group Company.


XUV590M with power steering XUV590M with power steering

The Gator© XUV590M Utility Vehicles are equipped with rack and pinion steering with power steering. These automotive-type systems exhibit excellent handling characteristics, as well as responsive steering and low steering effort.

Automotive-type, rack-and-pinion steering features include:

Optional electric power-assist steering (EPAS) system. Features of EPAS include:

  • Anti-kickback feature reduces the amount of steering unwinding when traversing difficult terrain.
  • The system is speed sensing and adjusts steering effort as the speed of the vehicle changes.
    • As speed increases there is less steering assist for improved road feel.
    • As speed decreases steering assist increases to give lower steering efforts for improved maneuverability.
  • A warning/functional light on the instrument panel provides self-diagnostics and a warning light in the situation of no assist.
  • Torque sensor measures steering wheel input so the on-board computer can provide the appropriate output for various driving situations.
    • Steel ball-bearings secure the steering shaft and delivers smooth, responsive operation
    • Tight turn radius of 3.7 m (12.3 ft) for excellent maneuverability
    • Completely sealed rack-and-pinion for long life
    • Low steering ratio (lock-to-lock steering wheel rotations) provides more responsive steering and less operator input
    • Shaft U-joints are phased for a smooth, uninterrupted motion of the steering wheel
    • Ackerman steering design provides more responsive steering, decreases tire wear when used on hard surfaces and is turf friendly (see description below)
    • Minimal bump steer eliminates unintended vehicle direction changes when traversing terrain and permits less feedback to the steering wheel (see description below)

 

The tire scrubbing, which also creates unwanted heat and wear in the tire, can be eliminated by turning the inside wheel at a greater angle than the outside one (Ackerman steering).

 

NOTE: Some competitors use parallel steering instead of Ackerman steering.

 

Bump steering defines the change in the forward steering angle (thus wheel position) as the suspension travels through its full motion. A large amount of angular change (5 degrees to 7 degrees) will alter the vehicle's direction and excessively move the steering wheel.


XUV590 with OSR nets XUV590 with OSR nets

A dynamically stable vehicle starts with the architectural design; the Gator© XUV Crossover Series has a low center of gravity, a wide stance, and balance of weight between the front and rear axles.

 

The combination leads to a class-leading static stability factor (SSF) and passing a multitude of dynamic stability tests.

OPS
Standard OPS Standard OPS

Standard OPS with three-point seat belts and OSR nets are shown on the XUV560E.

 

The OPS is Society of Automotive Engineers (SAE) J2194 certified.

OSR
OSR nets (available on XUV560 & XUV590) OSR nets (available on XUV560 & XUV590)
OSR doors (compatible with all XUV590 two-passenger models) OSR doors (compatible with all XUV590 two-passenger models)

Meets American Nation Standards Institute (ANSI) B71.9 certification

  • One-handed operation
  • Easy entry/exit
  • Great visibility

The Gator© XUV Mid-Size Crossover Series Utility Vehicles have a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously variable clutch system to the transaxle.

Key elements of the drive system include:

Variable-speed drive
Variable-speed drive (shown on XUV590 engine) Variable-speed drive (shown on XUV590 engine)

The variable-speed drive consists of two clutches and a drive belt:

  • Drive clutch is attached to the engine.
  • Driven clutch is attached to the transaxle.

Features include:

  • Ability to creep along slowly to maneuver in tight spaces
  • Standard full-clutch enclosure with a high intake and exhaust ensures a dry belt when crossing water
    • High-speed fan on drive clutch provides longer belt and clutch life by keeping components cool
  • TEAM® industry clutches provide high performance and longevity 

How the variable-speed drive works:

  1. As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
  2. As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
  3. With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
  4. The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.
Four-wheel drive (4WD), transaxle, mechanical front-wheel drive (MFWD), and constant-velocity (CV) shafts
XUV590 transaxle XUV590 transaxle
XUV560/XUV590 MFWD XUV560/XUV590 MFWD

4WD

  • Selectable 4WD system with a limited slip front differential and dash-mounted electronic rocker switch
    • Provides exceptional traction in challenging conditions
    • Maintains turf-friendly operation in two-wheel drive (2WD) mode
    • Combined with rear traction assist (differential lock), provides excellent traction in challenging conditions
    • More control descending hills with 4WD engaged, as all four wheels help slow the vehicle down
      • Clutch engagement still necessary to prevent free coasting

Transaxle

  • Low, high, neutral, reverse, and park transaxle
  • Automotive-style, integrated park position in transmission
  • To shift out of park, service brake must be pressed to release the parking solenoid. An audible click will be heard and allows the vehicle to shift out of park into the desired gear.
  • Low range for maximum torque delivered to the wheels for hauling, pushing, and pulling
  • High range for maximum vehicle speed
  • Cast-aluminum design for lower weight
  • Helical forward and reverse gears are used for quiet operation
  • Rear traction assist (differential lock) is controlled with an electronic rocker switch
    • NOTE: Locked differential design may increase scuffing of the turf during turns because the rear wheels are turning at the same speed through a turn.
  • Contains gear-case for transferring power to the MFWD
  • Splined shaft interfaces for maximum torque transfer and durability
  • All drive gears machined from highest grade gear steel
  • Vertically oriented oil drain for easy maintenance
  • Protected by a skid plate

MFWD

  • Electronically selectable by the operator
    • Offers limited slip functionality for precision steering and great traction while pointing and shooting out of a corner.
  • Near instantaneous torque to the front wheels after engaging switch
  • Vertically oriented oil drain for easy maintenance
  • Protected by a steel skid plate and frame

Drive shafts

  • Front and rear CV shaft diameter measures 23 mm (0.9 in.) and designed for high engine torque
  • Propshaft (transaxle to MFWD shaft) diameter measures 23.8 mm (0.94 in.) and designed for high engine torque
  • All CV shaft joints are maintenance free and protected by exclusive inboard and outboard thermoplastic elastomer (TPE) boots for durability. TPE material is more puncture resistant than neoprene, which is used by many competitors.

TEAM is a trademark of TEAM Industries.


Specs
Key Specs
Engine power 23.8* kW
32 hp
Front suspension Fully independent dual A-arm with adjustable coil-over shocks, 203 mm (8 in.) travel, anti-roll bar
Rear suspension Fully independent with lower A-arm and upper camber link with adjustable coil-over shocks, 203 mm (8 in.) travel
Additional information
Country of Manufacture U.S.
Brakes
Type 196 mm (7.7 in.) ventilated four-wheel stainless-steel disc brakes with 34.93 mm (1.375 in.) diameter hydraulic twin-piston calipers
Park brake Park in-transmission
Dimensions / Capacities
Operating weight (includes fuel/fluids) 676 kg
1491 lb
Cargo box dimensions 82 x 120.9 x 29.7 cm
32.3 x 47.6 x 11.7 in.
0.25 m3
8.9 cu ft
Cargo box capacity (weight) 227 kg
500 lb
Towing capacity 680 kg
1500 lb
Fuel capacity 28 L
7.4 U.S. gal.
Wheelbase 1.86 m
72.8 in.
Dry weight Wet weight (includes fuel/fluids): 650 kg
1434 lb
Length 2870 mm
113 in.
Width 1435 mm
56.5 in.
Height 1867 mm
73.5 in.
Tread centers Front: 1220 mm
48 in.
Rear: 1168 mm
46 in.
Ground clearance Minimum: 267 mm
10.5 in.
Payload capacity 408 kg
900 lb
Hitch Standard 50 mm (2 in.) rear receiver with optional 50 mm (2 in.) front receiver with recovery loops
Drivetrain
Maximum traveling speed High forward: 0-77 km/h
0-48 mph
Low forward: 0-45 km/h
0-28 mph
Reverse: 0-35 km/h
0-22 mph
Final drive Park, high, low, neutral, reverse transaxle
Four wheel drive Dash switch actuated four-wheel drive system with limited slip front differential plus locking rear differential
Transmission Continuously Variable Transmission (CVT) with clutch enclosure
Traction assist Positive locking, switch actuated rear differential lock
Descent control Not available
Engine
Displacement 586 cc
Power 23.8* kW
32 hp
Cooling system Liquid cooled
Features
Storage Two cupholders, sealed underhood storage, glovebox
Seating Bench seat
Color Green/yellow, olive/black, or TRUETIMBER® Kanati camo
Power steering Standard
Battery / Alternator / Power port 340 CCA
65 amp @ 3400 rpm regulated
12 VDC standard outlet
Instrumentation Digital display (gear position, system diagnostic light, speed, rpm, 4WD indicator, rear differential indicator, fuel level, coolant temperature, hour meter, miles, and service interval warning light)
Tires / Wheels
Front 25x8-12 Terrahawk AT (All Terrain) 4-ply rating steel wheels, various colors or 26x8-14 Maxxis® Bighorn® 2.0 6-ply rating aluminum alloy wheels, various colors or 26x8-14 Maxxis Bighorn 2.0 6-ply rating steel wheels, various colors
Rear 25x10-12 Terrahawk AT (All Terrain) 4-ply rating steel wheels, various colors or 26x10-14 Maxxis Bighorn 2.0 6-ply rating aluminum alloy wheels, various colors or 26x10-14 Maxxis Bighorn 2.0 6-ply rating steel wheels, various colors
Accessories and Attachments
Bumper

Constant-Velocity (CV) Guards - BM23309


Gator™ XUV 550, shown with front brushguard and Hella® performance spot lights (BM24108) Gator™ XUV 550, shown with front brushguard and Hella® performance spot lights (BM24108)
#

The front brushguard for the Gator XUV 550, XUV550 S4, XUV560, XUV560 S4, XUV590, and XUV590 S4 not only looks great, but it is also tough enough to take on the toughest terrain:

  • The aggressive appearance is no accident – the brushguard is made of large-diameter, 1.75-in. (44.45-mm) tubing and thick steel plates to protect the critical elements of the front of the vehicle, including the grille, lights, and hood.
  • Possesses welded brackets for quick installation of the Hella light kits
  • Rotates forward without tools for easy access to service points and additional storage under the hood
  • Design permits easy access under hood without modification
  • Design provides good approach angle for leveraging over obstacles in front of vehicle
  • Removable plate permits installation of optional winch and front receiver

Hella is a trademark of Hella KG Heuck & Co.


Shown on Gator™ XUV 550 with optional front brushguard and HELLA® performance spotlights Shown on Gator™ XUV 550 with optional front brushguard and HELLA® performance spotlights
Tire shown at angle Tire shown at angle

Protect the Gator XUV 550, XUV550 S4, XUV560, XUV560 S4, XUV590, and XUV590 S4 by adding front fender guards to the vehicle. Large, 44.45-mm (1.75-in.) diameter tubing provides superb protection for the front grille, lights, and fenders.

 

HELLA is a trademark of HELLA KG Hueck & Co.


Nerf bars Nerf bars
#

Add additional protection to the Gator™ XUV590 or RSX Utility Vehicle.

  • Adds extra protection to chassis and body panels
  • Easy to install

Nerf bars Nerf bars

Add additional protection to the Gator™ XUV590E/M, XUV560E/M or RSX860E/M Utility Vehicle.

  • Adds extra protection to chassis and body panels
  • Easy to install

Shown on Gator™ XUV 550 Shown on Gator™ XUV 550
Rear bumper detail Rear bumper detail

Add additional protection to the rear of the Gator XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicle by adding BM23362 rear bumper.


Cargo Box
Cargo box pail holder Cargo box pail holder
Cargo box pail holder Cargo box pail holder

The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.


Shown on Gator™ XUV 550 Shown on Gator™ XUV 550

The cargo box bed mat not only protects the floor of the cargo box from scratches and dents, but it also provides additional cushioning and slip resistance to items being hauled in the cargo box.


Cargo Box Power Lift - BM24812


Shown on Gator™ XUV 550 Shown on Gator™ XUV 550

Increase the versatility of cargo box on Gator XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles by adding cargo box rails. These sturdy rails attach easily to the cargo box, and allow for a variety of accessories to be added and removed with ease.

 

For use with select accessories featuring the 25-mm (1-in.) quick-clamp mounting system.


#

Increase the cargo capacity of Gator™ XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles by adding cargo box wall extensions to the cargo box. This accessory is easy to attach to, and remove from, the cargo box rails, thanks to the quick-clamp mounting system. The tailgate is able to be opened and closed while the extensions remain in place, allowing for easy dumping.

 

NOTE: Not compatible with operator protection system (OPS) poly cab.


Cargo box side extension kit (required, sold separately) Cargo box side extension kit (required, sold separately)
Cargo box side extension cover Cargo box side extension cover
Tailgate down, side extension flipped up Tailgate down, side extension flipped up

Key features:

  • The cover closes off the top of the side extensions, ideal for hauling hunting dogs, and small animals
  • Easily attaches to the side extension kit (required, sold separately)
  • Dimensions: 47.6” (120.9 cm) wide x 25” (63.6 cm) tall x 32.3” (82.4 cm) deep

 

Compatibility:

  • Gator™ XUV 550, XUV 550 S4, XUV560E/M, XUV560E/M S4, XUV590E/M, XUV590E/M S4, and RSX860E/M Utility Vehicles

Sportsman gear bag (closed) Sportsman gear bag (closed)
Sportsman gear bag (open) Sportsman gear bag (open)
Key features
  • Weather-resistant construction with rain flap
  • Wide opening top with military-grade zipper allows access from either side
  • Carry handle for transport when outside of the vehicle
  • Can be quickly secured and removed without tools
  • Fully padded to protect gear during transport
  • Two dividers attached with hook-and-loop fasteners (included) can be repositioned anywhere within the bag to secure loose gear or divide the bag into multiple compartments
  • Bottom plastic feet for durability and wear resistance
  • Inside dimensions: 129.5 cm x 20.3 cm x 35.6 cm (51 in. x 8 in. x 14 in.)
Compatibility
  • Mounts inside the cargo box and fits mid-size XUV550, XUV550 S4, XUV560/590, XUV560/590 S4, and RSX with cargo box rail attachment (required for proper installation)
Ordering information

Available through Order Zone.


Spare tire rack Spare tire rack

The spare tire rack is ready to be put to good use if the terrain claims a tire. The tire rack will hold either the front or rear tire. It mounts to both the cargo bed and the cargo box rails (required) to keep the spare tire secured through the roughest terrain.

 

Compatible with Gator™ RSX, XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, and XUV590 S4 Utility Vehicles.


Cover
Gator XUV560/590i front seat cover - black Gator XUV560/590i front seat cover - black

Available through OrderZone

 

Each kit contains one bench base cover, one backrest cover, and installation instructions.

 

Special Features:

  • Exceptional abrasion, tear, and puncture resistance
  • Constructed with military-grade Cordura™ fabrics
  • Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
  • Quick and easy installation
  • Available in black or REALTREE HARDWOODS HD® pattern
  • Front seat has modular lightweight load-carrying equipment (MOLLE) webbing between driver and passenger for MOLLE pouches
  • Limited 1-year warranty
  • Made In U.S.A.

 

Compatible with Gator XUV560i and XUV590i Utility Vehicles.

 

REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited. Cordura is a trademark of Invista.


Gator XUV560/590i front seat cover - camo Gator XUV560/590i front seat cover - camo

Available through OrderZone

 

Each kit contains one bench base cover, one backrest cover, and installation instructions.

 

Special Features:

  • Exceptional abrasion, tear, and puncture resistance
  • Constructed with military-grade Cordura™ fabrics
  • Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
  • Quick and easy installation
  • Available in black or REALTREE HARDWOODS HD® pattern
  • Front seat has modular lightweight load-carrying equipment (MOLLE) webbing between driver and passenger for MOLLE pouches
  • Limited 1-year warranty
  • Made In U.S.A.

 

Compatible with Gator XUV560i and XUV590i Utility Vehicles.

 

REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited. Cordura is a trademark of Invista.


Front seat cover - yellow Front seat cover - yellow

A yellow front seat cover for Gator™ utility vehicles is available through Order Zone. 

 

Special features:

  • Protect seats from mud and stains
  • Cushioned for extra comfort
  • Includes pockets for storing tools and gear
  • Easily adjusted elastic hem cord closure for a more custom fit
  • Easy access to seatbelts
  • Large-capacity, zippered, rear mesh cargo pocket
  • Compatible with the XUV560 and XUV590
  • Includes covers for the bench and base (two-piece set)
  • Limited 2-year warranty

Vehicle cover - black Vehicle cover - black
  • Provides year-round weather protection to a vehicle equipped with an operator protection system (OPS), rollover protective structure (ROPS) or full enclosure (cab)
  • Heavyweight polyester fabric for maximum durability and resistance to tears
  • Polyurethane-coated for maximum water resistance and repellency
  • Dual-reinforced air vents let air circulate and help to prevent ballooning in wind
  • Reinforced rear corners for added durability 
  • Elastic shock cord in the bottom hem for a quick custom-like fit
  • Compatible with Gator™ XUV 550, XUV560, XUV590, and RSX Utility Vehicles
Ordering information

Contact the local John Deere dealer for availability and pricing information.

Vehicle cover - black
Order number: LP37036


Transportable vehicle cover - black Transportable vehicle cover - black

All-season protection against sun damage, rain, dust, and tree sap. Additionally:

  • Black
  • Dual-reinforced air vents let air circulate and help prevent ballooning in winds
  • Reinforced corners for added durability
  • Tension panels allow cover to be used while trailering
  • Heavy-duty coated fabric will not stretch for maximum water resistance and repellency
  • Elastic cord in bottom hem for a quick and custom fit
  • Fits all Gator™ HPX, XUV 620i, XUV 625i, XUV 825i, XUV 855D, XUV 550, XUV560, XUV590, and RSX Utility Vehicles

Ordering information

Contact a local John Deere dealer for availability and pricing information.

 

Transportable vehicle cover - black

Order number: LP37040


Drawbar
48-mm (1-7/8-in.) hitch ball 48-mm (1-7/8-in.) hitch ball

The 48-mm (1-7/8-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

 

The ball hitch is available through Service Parts.


Receiver hitch and recovery loops shown installed Receiver hitch and recovery loops shown installed

Rugged and versatile, this is not an ordinary front receiver hitch. Made from welded steel, the recovery loops are strong enough to pull even the toughest loads, and are perfect for securing the vehicle to a trailer. This receiver hitch serves as the platform for the winch base. The receiver-type front hitch accepts the 51-mm (2-in.) drawbar (sold separately).

 

Required for mounting BM23995 (Warn® winch – Gator™ XUV 550), BM24019 (Warn winch – XUV 550 S4), BM26248 (Warn winch – XUV560, XUV560 S4, XUV590, XUV590 S4), and BM24437 (Warn winch – RSX Utility Vehicle).

 

Warn is a trademark of Warn Industries, Inc.


48-mm (1-7/8-in.) ball hitch shown 48-mm (1-7/8-in.) ball hitch shown

The 51-mm (2-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

 

The ball hitch is available through Service Parts.


Drawbar kit for receiver hitch Drawbar kit for receiver hitch

Description:

  • Kit includes a 51-mm (2-in.) drawbar, 10-mm (0.39-in.) pin, and hair cotter pin
  • Steel construction has a 25-mm (1-in.) ball hole size
  • Can be mounted in the standard rear receiver hitch or the optional front receiver hitch
  • Compatible with all Gator model year 2011-current XUV560, XUV560 S4, XUV590, XUV590 S4, XUV 625i, XUV 825, XUV 855, RSX860, and M-Gator™ A2 Utility Vehicles
  • Compatible with HPX 615 and 815 Utility Vehicles
  • Compatible with XUV 620i and XUV 850D Utility Vehicles

NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.


Front Rack
Shown on XUV 550 S4 Shown on XUV 550 S4
#

Expand the work capabilities and cargo capacity of Gator™ XUV 550, XUV550 S4, XUV560, XUV560 S4, XUV590, and XUV590 S4 by adding the front rack. Made of heavy-duty materials, the front rack not only increases the functionality of the Gator, it is also designed to enhance the aesthetics of the vehicle. This generously sized rack, 1270-mm (50-in.) long by 381-mm (15-in.) wide by 102-mm (4.5-in.) deep - outside dimensions, will haul up to a 45.4-kg (100-lb) payload.
 
The rack easily mounts to the required front brush guard. Once the rack is mounted, it tilts forward in conjunction with the brush guard to allow full access to under-hood storage and service points.


MOLLE device pouch MOLLE device pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Velcro flap closure
  • Padded to protect device and contents
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 6-in. (152.4-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Built-in drain hole
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


MOLLE device pouch MOLLE device pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Velcro flap closure
  • Padded to protect device and contents
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 6-in. (152.4-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Built-in drain hole
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


MOLLE fire extinguisher pouch MOLLE fire extinguisher pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Military-grade rapid extraction clips
  • Fits standard round 2.5-lb (1.1-kg) fire extinguishers
  • Padded to protect contents
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 6–in. (152.4-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


MOLLE fire extinguisher pouch MOLLE fire extinguisher pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Military-grade rapid extraction clips
  • Fits standard round 2.5-lb (1.1-kg) fire extinguishers
  • Padded to protect contents
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 6–in. (152.7-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


MOLLE large storage pouch MOLLE large storage pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Dual military-grade zippers and pulls
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 5–in. (127-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Built-in drain hole
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


MOLLE large storage pouch MOLLE large storage pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Dual military-grade zippers and pulls
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 5–in. (127-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Built-in drain hole
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


MOLLE small storage pouch MOLLE small storage pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Military-grade zippers and pulls
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 5–in. (127-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


MOLLE small storage pouch MOLLE small storage pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Military-grade zippers and pulls
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 5–in. (127-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.


Harnesses
Beacon light harness kit (shown on Gator™ XUV560) Beacon light harness kit (shown on Gator™ XUV560)

The beacon light harness kit is required when installing the beacon light.

 

The kit includes the switch to mount in the operator protection system (OPS) switch bank and wire harness between the OPS switch bank and beacon light.


Rear OPS / roof light harness kit Rear OPS / roof light harness kit

The rear OPS/roof light harness kit is required when installing the light kits to the rear of the OPS or roof. Also requires OPS switch bank.

 

The kit includes the switch and wire harnesses from the OPS switch bank to the lights.


Brush guard light harness kit Brush guard light harness kit

The brush guard light harness kit is required when installing the light kits to the brush guard or PreRunner bumper on the Gator™ RSX.

 

The kit includes the switches and wire harnesses.


Front OPS / roof light harness kit Front OPS / roof light harness kit

The front OPS/roof light harness kit is required when installing the light kits to the front of the OPS or roof. Also requires OPS switch bank.

 

The kit includes the switch and wire harnesses from the OPS switch bank to the lights.


Lighting
Beacon light Beacon light

Features and benefits:

  • 3-in. (76-mm) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
  • Especially useful for working around properties and job sites
  • Acrylic amber lens resists scratching and scuffing
  • Impact-resistant nylon housing
  • SAE J845 (Class 3)-compliant
  • UL recognized
  • Stands 4.4 in. (111.5 mm) tall

Compatible with the following vehicles:

  • Model year 2006 to current Gator™ HPX Utility Vehicles
    • Requires poly roof and operator protection system (OPS) switch bank for mounting
    • Requires beacon light harness kit
  • Gator XUV 620i and 850D Utility Vehicles
    • Requires poly roof and OPS switch bank for mounting
    • Requires beacon light harness kit
  • Model year 2011 to current Gator XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
    • Requires poly roof and OPS switch bank for mounting
    • Requires beacon light harness kit
  • Gator XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4 Utility Vehicles
    • Requires OPS switch bank and brake/tail light for brake light mounting or OPS switch bank and poly roof for roof mounting
    • Requires beacon light harness kit
  • Gator RSX Utility Vehicles
    • Requires OPS switch bank and brake/taillight for brake light mounting or OPS switch bank and poly roof for roof mounting
    • Requires beacon light harness kit

Roof mounted Roof mounted
Brush guard mounted Brush guard mounted
Rigid Industries LED driving lights (two lights per kit)
Lux = measure of intensity of light that hits or passes through a surface Lux = measure of intensity of light that hits or passes through a surface

Mounted on the front operator protection system (OPS)/roof or brush guard for extreme night driving lights.

 

   Watts (per light) AMP draw (per light)  LEDs (per light)  Raw lumens (per light)  Beam distance ft (m) 
LED driving lights  34.5  2.5  3030  942 (287) 
LED light specifications:
  • 50,000+ hour lifespan
  • IP69K certified
  • Polycarbonate lens
  • Aluminum housing
  • Powder-coat finish
  • Sealed Deutsch connectors
  • Operating Temp -40°F – 145°F
  • MIL810-STDG vibration certified
  • ASTMB117 salt / fog certified
  • Standard black lens covers

 

The LED lights are compatible with the HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, RSX Utility Vehicles.

 

These lights are not compatible with Jensen radios or deluxe cab frame.

 

The LED lights can be mounted on the brush guard, roof (front or rear), or directly on the OPS (front or rear). Roof or OPS mount requires the OPS Switch Bank.  The LED light kits also require the necessary Light Harness Kit based on the desired light mounting location:

 

Part Number  Description 
 BM25704  LED driving lights
 BM25619  Brush guard light harness kit
 BM25620  Front OPS/roof light harness kit
 BM25731  Rear OPS/roof light harness kit
 BM25621  Rear OPS/roof light harness kit (S4s)
Front OPS/roof light harness kit Front OPS/roof light harness kit
Rear OPS/roof light harness kit Rear OPS/roof light harness kit
Brush guard light harness kit Brush guard light harness kit

Roof mounted Roof mounted
Rigid Industries LED work lights (two lights per kit)
Lux = measure of intensity of light that hits or passes through a surface Lux = measure of intensity of light that hits or passes through a surface

Ideally mounted on the front or rear operator protection system (OPS)/roof for light around the vehicle to work at all hours of the night.

 

   Watts (per light) AMP draw (per light)  LEDs (per light)  Raw lumens (per light)  Beam distance ft (m) 
LED work lights  20  1.45  1568  866 (264) 
LED light specifications:
  • 50,000 or more hour lifespan
  • IP69K certified
  • Polycarbonate lens
  • Aluminum housing
  • Powder-coat finish
  • Sealed Deutsch connectors
  • Operating temperature - 40°F – 145°F (4°C-63°C)
  • MIL810-STDG vibration certified
  • ASTMB117 salt / fog certified
  • Standard black lens covers

 

The LED lights are compatible with the Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, RSX Utility Vehicles.

 

These lights are not compatible with Jensen radios or deluxe cab frame.

 

The LED lights can be mounted on the brush guard, roof (front or rear), or directly on the OPS (front or rear). Roof or OPS mount requires the OPS switch bank.  The LED light kits also require the necessary light harness kit based on the desired light mounting location:

 

Part Number  Description 
 BUC10222  LED work lights
 Review configurator for latest part numbers  Brush guard light harness kit
 Review configurator for latest part numbers  Front OPS/roof light harness kit
 Review configurator for latest part numbers  Rear OPS/roof light harness kit
 Review configurator for latest part numbers  Rear OPS/roof light harness kit (S4s)
Front OPS/roof light harness kit Front OPS/roof light harness kit
Rear OPS/roof light harness kit Rear OPS/roof light harness kit
Brush guard light harness kit Brush guard light harness kit

OPS with power wire and switch bank OPS with power wire and switch bank
Switch bank (detail) Switch bank (detail)

Product attributes:

  • Accommodates up to three sets of OPS lights
  • Allows for simple wire routing - only two wires run through the OPS or roll-over protective structure (ROPS) tubes; each light kit has its own switch and wiring harness
  • Switches are located in the OPS or rollover protective structure (ROPS)

Compatible with:

  • Model year 2011 - current Gator™ XUV, HPX Gas, HPX Diesel, and M-Gator A2 Non-Military Utility Vehicles
  • Model year 2012-2013 Gator XUV 550, XUV 550 S4, and RSX Utility Vehicles
  • Model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles
  • Current Gator XUV560, XUV560 S4, XUV590, and XUV590 S4 Utility Vehicles

Work lights (rear mounted) Work lights (rear mounted)

Increase the capability of the Gator™ Utility Vehicle by adding work lights. Lights mount to the front or rear of the poly roof or directly to the operator protection system (OPS).

 

Kit includes the pair of work lights and hardware. Requires necessary light harness kit based on desired mounting location.

 

Lights can also be installed in a low mount position behind the front bumper.

 

Product attributes:

  • This flood light kit provides a wide range of light, making it ideal for tasks at night
  • Especially useful for working around properties and job sites
  • Requires OPS switch bank when mounted to roof or OPS

Compatible with:

  • XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4
  • HPX
  • XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, and XUV 855D S4
  • RSX Utility Vehicles

Mirrors
Shown mid-size XUV Shown mid-size XUV

The OPS rearview mirror for Gator™ Utility Vehicles can be installed when equipped with an OPS.

The rearview mirror can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.

Product attributes include:

  • Composite components made of impact resistance materials
  • Installs with quick clamp to OPS tube
  • Compatibility with all Gator Utility Vehicles equipped with an OPS

Shown on Gator™ HD XUV Shown on Gator™ HD XUV
Shown on HD XUV  Shown on HD XUV

The OPS side mirrors for Gator Utility Vehicles can be installed when they are equipped with OPS.

 

The side mirrors can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.

 

Product attributes include:

  • Composite components made of impact-resistant materials
  • Installs without tools and easily adjustable
  • Compatibility with all Gator HPX, XUV 620i, XUV 850D, XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, RSX, M-Gator A2, and M-Gator A3 Utility Vehicles equipped with an OPS

NOTE: OPS side mirrors are not compatible with the deluxe cab or poly cabs (poly cabs include standard mirrors).


Shown on Gator™ XUV550 Utility Vehicle Shown on Gator™ XUV550 Utility Vehicle
Shown on RSX Shown on RSX

The side mirrors are secured to the poly door and offers expanded visibility for the operator.

Product attributes include:

  • Composite components made of impact-resistant materials
  • Easily adjustable
  • Compatibility with all Gator XUV550, XUV550 S4, and RSX Utility Vehicles equipped with the poly cab doors

Roof
Canvas roof/rear panel shown with canvas doors and full flip-out poly windshield Canvas roof/rear panel shown with canvas doors and full flip-out poly windshield
Canvas roof/rear panel Canvas roof/rear panel

Features of the canvas roof/rear panel:

  • This canvas roof/rear panel is a single-piece construction that mounts to the top and rear of the operator protection system (OPS)
  • Made from premium, heavy-duty 600 denier-solution dyed, water-resistant polyester with UV stabilizers, for mold and tear resistance
  • Durable PVC window resists yellowing or cracking. Window opens easily with a zipper and can be secured in place with straps
  • Installs in minutes
  • Compatible with canvas doors on Gator™ XUV590i Utility Vehicles
  • Compatible with poly doors
  • Compatible with full flip-out poly windshield
  • Not compatible with glass windshield

Shown on mid-size XUV with additional attachments Shown on mid-size XUV with additional attachments

The OPS poly roof provides all-year-round weather protection to the operator and passenger. This roof is compatible with model year 2012 and newer mid-size XUV and RSX Utility Vehicles.

 

Features and benefits:

  • Features the OPS quick-clamp mounting system – the one-piece acrylonitrile butadiene styrene (ABS) plastic roof easily attaches and detaches to the vehicle’s OPS or rollover protective structure (ROPS) with four clamps
  • Sturdy design allows for the Gator™ utility vehicle to be towed at highway speeds while the roof is installed
  • Useful for minimizing sun exposure to the operator, passenger, and operating station
  • Molded-in water troughs route water away from the operator and passenger
  • Acts as the foundation to build an OPS poly full-cab enclosure (designed to work with the OPS full windshield kits and OPS poly rear panel and doors kit)
  • Compatible with a variety of OPS light kits

Shown on Gator™ XUV camo, with optional brake and tail light kit, OPS rear screen, and OPS half windshield (front) Shown on Gator™ XUV camo, with optional brake and tail light kit, OPS rear screen, and OPS half windshield (front)
Shown with optional brake and tail light kit, OPS rear screen, and OPS half windshield (back) Shown with optional brake and tail light kit, OPS rear screen, and OPS half windshield (back)

The OPS poly roof – camo provides all-year-round weather protection to the operator and passenger.

Features and benefits:
  • Features the OPS quick-clamp mounting system; the one-piece ABS roof easily attaches/detaches to the vehicles operator protection system (OPS) or rollover protective structure (ROPS) with four clamps. No tools required.
  • REALTREE HARDWOODS HD® camo pattern matches the camo Gator XUV Utility Vehicle
  • Sturdy design allows for the Gator XUV 550, XUV590, or RSX to be towed at highway speeds while the roof is installed
  • Useful for minimizing sun exposure to the operator, passenger, and vehicle operating station
  • Molded-in water troughs route water away from the operator and passenger
  • Acts as the foundation to build an OPS poly full enclosure (designed to work with the OPS poly full windshield kit and OPS poly rear panel and doors kit)
  • Compatible with a variety of OPS lights kits

REALTREE HARDWOODS HD is a U.S.-registered trademark of Jordan Outdoor Enterprises Limited


Sprayers
25-gal. (94.6-L) bed sprayer 25-gal. (94.6-L) bed sprayer

The 25-gal. (94.6-L) Gator™ bed sprayer is designed to work with the XUV 550 and RSX Series Gator vehicles. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and deicer. It comes complete with a 43-in. (1.1-m) boom that sprays a 120-in. (3-m) swath. It is equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable, brass spray wand tip achieves streams up to 30 ft (9 m). It comes equipped with rubber feet and custom brackets, which secure to the Gator bed for a no-tools mount.

Special features:

  • 25 gal. (94.6 L) capacity
  • Includes sprayer remote control for added convenience
  • Brackets secure to Gator bed, no bungee or straps required
  • No-tools mounting (after initial install)
  • Convenient side mount hose wrap

This product requires accessory wire harness (AM140972) sold through John Deere.

 

Additional features:

  • 100 psi SHURflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage
  • The fully adjustable, brass spray wand tip achieves streams up to 30 ft (9 m)
  • Equipped with a 19-ft (5.8-m) hand-wand hose with side-mount hose tender for convenience
  • Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
  • Remote control on/off switch with 100-ft (30-m) range
  • Easy boom removal for added convenience
  • Control valve channels spray to either the boom or spray wand
  • Rugged translucent yellow tank with molded fill-level indicators (in gallons)

Ordering information

Contact a local John Deere dealer for availability and pricing information.
 

SHURflo is a trademark of SHURflo, LLC.


45-gal. (170.3-L) bed sprayer 45-gal. (170.3-L) bed sprayer

The 45-gal. (170.3-L) Gator™ bed sprayer is designed to work with the Gator XUV 550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Series Utility Vehicles. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and deicer. It comes complete with a 43-in. (1.1-m) boom that sprays a 120-in. (3-m) swath. It is equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft (9 m). It comes equipped with rubber feet and custom brackets, which secure to the Gator bed, for a no-tools mount.

 

Special features:

  • 45-gal. (170.3-L) capacity
  • Includes sprayer remote control for added convenience
  • Brackets secure to Gator bed, no bungee or straps required
  • No tools mounting (after initial install)
  • Convenient side mount hose wrap

This product requires accessory wire harness (AM140972) sold through John Deere.

 

Additional features:

  • 100 psi SHURflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
  • The fully adjustable brass spray wand tip achieves streams up to 30 ft (9 m)
  • Equipped with a 19-ft (5.8-m) hand wand hose with side mount hose tender for convenience
  • Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
  • Remote control on/off switch 100-ft (30.5-m) range
  • Easy boom removal for added convenience
  • Control valve channels spray to either the boom or spray wand
  • Rugged translucent yellow tank with molded fill level indicators (in gallons)

Ordering information

 

Contact the local John Deere dealer for availability and pricing information.

 

SHURflo is a trademark of SHURflo, LLC.


45 Gallon High Performance Bed Sprayer - LP39098


Shown on TH 6x4 with HP 45-gal. Sprayer Shown on TH 6x4 with HP 45-gal. Sprayer

The standard Gator boom is compatible with all Gator sprayer models and is sold separately for the HP Gator sprayers. This fixed boom is conveniently sized at 43 in. (1.1 m) and does not extend wider than the Gator bed, but it is perfect for covering ground quickly and thoroughly with a 120-in. (3-m) spray swath.

 

The boom is ideal for basic spraying application. Three tips and check valves round out this offering (boom only, mounting brackets are provided with sprayers).

Boom Features:
  • 43-in. (1.1-m) boom with three tips
  • Check valves prevent siphoning and dripping
  • Sold separately for:
    • HP 45-gal. Gator Bed Sprayer
    • HP 90-gal. Gator Bed Sprayer
    • HP 45-gal. Gator Bed Sprayer – XUV 550

Shown on TH 6x4 with HP 45-gal. Sprayer Shown on TH 6x4 with HP 45-gal. Sprayer
Shown on TH 6x4 with HP 45-gal. Sprayer Shown on TH 6x4 with HP 45-gal. Sprayer

The 150-in. (3.81-m) precision boom is compatible with the HP sprayers. This folding boom is made to cover ground quickly and thoroughly with five precision spray tips, TeeJet™ nozzle bodies and commercial grade diaphragm check valves. The outer tips offer versatility with built-in shut offs to allow an adjustable 90-in. (2.3-m), 120-in. (3-m), or 150-in. (3.8-m) spray swath.

150-in. (3.8-m) precision boom features:
  • Folding spring hinge
  • Breakaway design
  • Five TeeJet tips and nozzle bodies
  • Adjustable spray swath (90 in., 120 in., 150 in.)
  • 1/2-in. industrial-grade rubber hose
  • Designed to work with
    • HP 45-gal. Gator™ Bed Sprayer
    • HP 90-gal. Gator Bed Sprayer
    • HP 45-gal. Gator Bed Sprayer – XUV 550

 

 

 

TeeJet is a registered trademark of Spraying Systems Company.


Shown on TH 6x4 with HP 90-gal. Sprayer Shown on TH 6x4 with HP 90-gal. Sprayer
HP 90-gal. Sprayer HP 90-gal. Sprayer

The 24-ft (7.3-m) boomless spray nozzles are compatible with all HP sprayers. This boom is perfect for covering ground quickly and thoroughly with a 24-ft (7.3-m) spray swath. It is ideal for uneven terrain or where precision spray application is not necessary. TeeJet™ nozzle bodies and commercial grade diaphragm check valves round out this offering.

Boomless spray nozzles feature
  • Three TeeJet tips and nozzle bodies
  • Commercial-grade diaphragm check valves
  • 1/2-in. (12.7-mm) industrial-grade rubber hose
  • Designed to work with all HP sprayers :
  • HP 45-gal. Gator™ Bed Sprayer
  • HP 90-gal. Gator Bed Sprayer
  • HP 45-gal. Gator Bed Sprayer – XUV 550

 

 

 

 TeeJet is a registered trademark of Spraying Systems Company.


45-gal. (170- L) Tow-Behind Sprayer 45-gal. (170- L) Tow-Behind Sprayer

The HP 45-gal. (170-L) Tow-Behind Sprayer offers the ultimate in performance and versatility. With a 45-gal. capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and deicer. It is the perfect match for the customer who wants extreme performance. 

 

The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction and have a low profile, which maintains a low center of gravity for excellent stability. Cover ground quickly with flexible boom options; a 150 in. (3.8 m) precision folding, 120-in. (3-m) standard three tip, 24-ft (7.3-m) boomless, or no boom at all (boom sold separately).

HP features:
  • 45 psi, 3.6 gpm SHURflo® diaphragm-type pump is designed for high hour applications and can be run dry without damage
  • Premium pistol grip spray gun, designed for single hand mist to 35 ft (10.7 m) stream
  • Front-mount hose tender for easy hose access and storage
  • Glycerin filled pressure gauge
  • TeeJet™ pressure regulation/recirculation valve
  • Includes sprayer remote control
Additional features
  • Easy boom removal for added convenience
  • Control valve channels spray to either the boom or spray wand
  • Rugged translucent yellow tank with molded fill level indicators (in gal.)
Boom options (sold separately):
  • 150-in. (3810-mm) precision spray boom
  • 24-ft  (288-in.) boomless spray nozzles

 

SHURflo is trademark of SHURflo, LLC. TeeJet is a registered trademark of Spraying Systems Company.


45-gal. (170-L) tow-behind sprayer 45-gal. (170-L) tow-behind sprayer

The 45-gal. (170-L)  trail-type sprayer is equipped with a boom that sprays a wide, 120-in. width.

  • Three nozzles for efficient broadcast spraying
  • Boom folds up against the tank for storage

A 20-ft hose and handgun are provided.

  • The 20-ft hose and handgun are helpful when spraying trees or other remote areas that cannot be reached with the sprayer itself
  • A 14-in. wand on the handgun is standard equipment

The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction.

  • Low center of gravity gives excellent stability
  • Equipped with a 4-position hitch
  • Rear of the frame is designed so the sprayer will stand upright during storage to reduce the amount of space required

Additional features include:

  • Diaphragm-type pump designed for high-hour commercial applications; it can be run dry without damage
  • The spray wand is constructed of non-corrosive polypropylene material with Viton® components for remote spray jobs
  • Two-wire fused wiring harness complete with quick-disconnects for convenient electrical hookup
  • Large cap to easily fill up the tank
  • Control valve to channel the spray to the boom or handgun
  • Rugged translucent yellow tank with molded fill-level indicators (in gallons)
Specifications

Capacity

45 U.S. gal. (170 L)

Pump

Type

Electric motor
and diaphragm

Manufacturer

SHURflo® 

Operating pressure

100 psi

Current draw

7 amp

Valve material

Viton® 

Diaphragm material

Santoprene™

Strainer

Stainless steel

Boom spray width

120 in. (305 cm)

Spray tip(s)

Three #11008VP

Spray flow rate

2.1 U.S. gpm (7.9 L/min)

Remote spray method

20-ft hose with adjustable polypropylene handgun with 14-in. wand

Handgun material

Polypropylene with Viton components

Adjustment

Fan-to-stream

Tires

15x6-6 pneumatic

Wheel bearings

Roller bearings

Axle diameter

1 in. (2.5 cm)

Hitch

Pin and spring clip, four height positions

Weight - empty

80 lb (36.3 kg)

Weight - full

456 lb (207 kg)


Compatible with all Gator models except XUV 550, XUV 550 S4, and RSX Utility Vehicles.

Ordering information

Contact the local John Deere dealer for availability and pricing information.

 

45-gal. (170-L) tow-behind sprayer
Order number: LP20485

 

SHURflo is a U.S.-registered trademark of SHURflo, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.


Turn Signals
Front turn signals Front turn signals
Rear turn signals and reverse lights Rear turn signals and reverse lights

The turn signal kit includes turn signals (front and rear), reverse lights, and four-way flashers (hazards). The turn signal and hazard switch mounts on the dash of the vehicle.

 

Requires turn signal light harness kit.

 

Compatible with XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4

 

NOTE: Not intended for use on public roadways.


Turn signal light harness kit Turn signal light harness kit

The turn signal light harness kit is required when installing the turn signal light kit.

 

The kit includes the switches and wire harnesses.

 

Compatible with Gator™ HPX, XUV560, XUV550, XUV590i, XUV590i S4, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.


Winch
1587.6-kg (3500-lb) winch (shown on XUV590i) 1587.6-kg (3500-lb) winch (shown on XUV590i)

This winch also requires a winch mount kit and a 50.8-mm (2-in.) front receiver with recovery loops.

 

Parts in the kit:

  • WARN ProVantage 1587.6-kg (3500-lb) winch
  • Roller fairlead assembly
  • Hook
  • Hook strap
  • 3-m (10-ft) hand-held remote
  • Winch contactor

 

WARN and ProVantage are trademarks of Warn Industries, Inc.


Winch accessories kit Winch accessories kit

Double the pulling power, change the pulling direction, and keep the winch in proper working order.

The accessories kit is essential gear for operators getting the most out of their winch:

  • Effectively anchors to trees/boulders
  • Change the pulling direction
  • Double the pulling capacity

The accessories kit includes:

  • Flexible tree strap
  • Snatch block
  • Shackle

Each kit comes in a black Cordura® heavyweight-nylon soft case.

 

Cordura is a trademark of INVISTA.


Wireless winch remote Wireless winch remote
Wireless winch remote mounted on XUV835 Wireless winch remote mounted on XUV835
Key features
  • Wirelessly control winch from up to 15 m (50 ft) away
  • Weatherproof transmitter has two large buttons, making it easy to operate even while wearing gloves
  • Colored light-emitting diode (LED) lights provide clear operator feedback
  • Kit includes wireless transmitter, receiver, holster, wiring, and mounting hardware
Compatibility
  • Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
  • Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Windshield
Shown with optional attachments Shown with optional attachments

The abrasion-resistant half windshield is an excellent solution for operators that want to deflect the main force of wind, but still allow airflow through the operator’s station. 

  • Made with high-impact-strength abrasion-resistant polycarbonate material
  • No tools required - features the operator protection system (OPS) quick-clamp mounting system. The windshield attaches to the OPS or rollover protective structure (ROPS) with two quick clamps, making attaching and removing quick and easy

Canvas rear panel Canvas rear panel

NOTE: Picture shown is canvas roof/rear panel. Canvas rear panel would be rear portion only.

 

Features of the canvas rear panel:

  • Made from premium, heavy-duty 600 denier-solution dyed, water-resistant polyester with UV stabilizers, for mold and tear resistance
  • Durable PVC window resists yellowing or cracking. Window opens easily with a zipper and can be secured in place with straps.
  • Installs in minutes
  • Installed with full windshield and roof will help keep dust out of operator station
  • Compatible with poly roof, canvas doors, poly doors

OPS full no-scratch windshield OPS full no-scratch windshield
Installed on Gator™ XUV 550 Installed on Gator™ XUV 550

NOTE: Windshield is not tinted; picture is tinted to show details

 

The OPS poly full windshield is available for Gator XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles when equipped with an operator protection system (OPS) or rollover protective structure (ROPS) to provide additional protection for the operator and passenger.

  • Manufactured from super premium, two-sided Makrolon AR grade abrasion-resistant polycarbonate.
  • Increased UV longevity – resists yellowing longer than optical grade polycarbonate
  • Increased chemical resistance over traditional optical grade polycarbonate
  • Almost as hard as glass with greater impact strength
  • 30 times less prone to scratching than standard poly windshield
  • Designed to permit unfettered access to under-hood storage areas and service points (no tools required)
  • Upper panel may be infinitely positioned to allow desired amount of ventilation
  • Seals against the hood, OPS, and optional OPS roof
  • Features the OPS quick-clamp mounting system; attach to/detach from the OPS or ROPS with ease

#
#

Expand the comfort and enjoyment of the Gator™ Utility Vehicle with the addition of the OPS glass windshield with integrated wiper kit. This windshield offers superior visibility that is clear and distortion free.

 

This durable, laminated glass windshield comes equipped with a standard windshield wiper.

 

No matter what the condition, the occupants of the vehicle will be protected from the elements; the lower section of the windshield seals tightly against the hood of the vehicle.

 

Requires the OPS switch bank.

 

The OPS glass windshield with wiper is compatible with OPS poly roofs, poly doors, side-mounted mirrors, and front hood racks.


Occupant Protective Structure (OPS) Windshield Washer Kit - BM25103


Shown on Gator™ XUV550 Utility Vehicle Shown on Gator™ XUV550 Utility Vehicle
#

The operator protection system (OPS) poly rear window is an excellent solution for operators seeking to reduce dust and air flow throughout the operator station when coupled with a half or full windshield. Made out of high-impact-strength abrasion resistant polycarbonate material, this rear window is highly durable and scratch resistant. It also attaches to and detaches from the OPS or rollover protective structure (ROPS) with ease, thanks to the quick-clamp mounting system.

 

Compatible with model year 2017 Gator XUV560, XUV590, and RSX Utility Vehicles.

 

Prior to model year 2017, this is compatible with two-passenger XUV550, XUV560, XUV590, and RSX Utility Vehicles.


Specials

0% APR fixed rate for 48 months†

on New John Deere XUV/HPX/RSX Gator UTVs

Offer Duration
August 05, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

0% APR fixed rate for 48 months†

on New John Deere XUV/HPX/RSX Gator UTVs

Offer Duration
August 05, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

3.90% APR fixed rate for 84 Months OR No-Interest if Paid in Full within 12 Months†

on New John Deere Gator UTVs

Offer Duration
August 05, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

Save $300

on MY20 and older Mid-Size Gator Utility Vehicles

Offer Duration
July 15, 2020 - October 30, 2020

More Details On This Offer

Some restrictions apply. Contact us for details.

*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
Sarasota

6209 McIntosh Rd
Sarasota, FL 34238
941-924-9709

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group