Roomy and quiet operator station
Cab
M cab door
R cab door
- Functioning door windows ™ roll up and down
Side windows and front window
Venting position
- Fully opening front window with vent position
Headliner shown on an M-trim open station (with optional windshield, wipers, rear panel, and side mirrors installed)
- Available interior roof headliner factory installed on M-trim cab units and M-trim heating, ventilation, and air conditioning (HVAC) cab units
Door sealing
Styled roof (R roof shown)
- Styled roof with channels designed-in to move water to the outside edges
Front roof light
Rear roof light
- Molded-in pockets for front and rear light mounting
- Keeps lights below the roof line for protection
Inner door handle
Outer door handle
- Easy-opening door handles and mechanisms
M-trim HVAC controls
Efficient heating, ventilation, and air conditioning (HVAC) system
HVAC details
Automotive-style controls on the center of the dash - easy and convenient to reach for the operator or passengers
- Four dash vents
- Adjustable louvers and face plates
- Windshield vents mounted on the top of the dash
- Fast defrost
- Efficient air flow
- Air filter on the passenger side of the cab at foot level
- Three fan speeds
- 0: off
- 1: low
- 2: medium
- 3: high
- Temperature adjustment knob
- Counterclockwise for cooler temperature
- Clockwise for warmer temperature
- Four air flow modes
- Dash vents
- Dash and floor vents
- Defroster vents and floor vents
- Defroster vents
- HVAC compressor on/off button
- Pushing the button once turns the air conditioning on - indicator light illuminates blue
- Push the button again to turn off the air conditioning
- Air flow constant with compressor on or off
- Turn compressor off for full engine power
- Gas machines have an idle bump to raise rpms to assist driving more power for the HVAC system
- 1075 rpm in any gear at idle with air conditioning on
- 1400 rpm when in neutral and the park brake is engaged
- HVAC - if equipped
HVAC controls and vents on the dash
Powerful diesel engine delivers superb starting, idling, and throttle response
854-cc (52.1-cu in.) diesel engine
The machine is powered by an 854-cc (52.1-cu in.), 3-cylinder, liquid-cooled, four-cycle diesel engine. It produces 48 Nm (35.5-lb-ft) of torque at 2600 rpm.
The advanced engine delivers superb starting, idling, and throttle response during operation.
The engine offers the following performance and reliability features:
- Indirect-injection diesel with glow plugs ensures fast starts in cold temperatures
- 17.1 kW (22.9 hp*) at 3600 rpm
- Overhead valve design for greater efficiency and fuel economy
- Spin-on oil filter for easy servicing
- Quiet operation through the entire rpm range
- Molybdenum-coated pistons
- High-stiffness cylinder block and gearcase
- High-flow water pump and optimized water jackets maintain a steady operating temperature and eliminate hot spots
- Full-pressure lubrication system
- In-line mechanical fuel pump
- Five-point, rubber isolated for quiet operation and minimal vibration
- Dry replaceable dual-element air cleaner with remote intake and a restriction indicator
- See-through coolant recovery tank permits the operator to check the coolant level without removing the radiator cap
- Open front grille allows proper air flow and ventilation to the radiator.
*The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.
Dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics
XUV front suspension detail
To complement the robust frame, the XUV is equipped with four-wheel independent suspension.
A dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics.
The entire suspension system has been optimized to handle cargo without compromising ride quality or vehicle stability.
M-trim cab units (factory installed) and R-trim units have heavy-duty front and rear shocks installed from the factory.
- A higher spring rate and higher preload force versus standard springs prevent the vehicle from sagging with a heavy payload.
- These heavy-duty shocks help with the heavier weight of the cab and when attachments are installed, like blades.
Dual A-arm independent front suspension features include:
- 200.7 mm (7.9 in.) of travel provides ample wheel travel to keep all four wheels on the ground for superior traction, excellent ride quality, and vehicle control
- Heavy-duty nodular cast-iron knuckles support the constant-velocity (CV) shaft and wheel
- Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
- CV shaft protection from sticks that may puncture the rubber boot
- Coil-over shocks absorb the most demanding terrain
XUV rear suspension detail
XUV rear suspension detail
Dual A-arm independent rear suspension features include:
- Unequal length and dual A-arm construction for superior wheel control and travel
- 231.14 mm (9.1 in.) of total travel provides ample wheel travel to keep all four wheels on the ground for superior traction, excellent ride quality, and vehicle control
- Coil-over shocks absorb the most demanding terrain
- A-arms made from square/rectangular tubing reduce weight while remaining rigid
- Heavy-duty nodular cast-iron uprights support wheel loads with a double row of ball bearings
- CV driveshaft protection from sticks that may puncture the rubber boot
- Rear sway bar for lateral stability
Superior terrain capability
The Gator© XUV Crossover Series Utility Vehicle has a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously variable clutch system to the transaxle.
Key elements of the drive system include:
Variable-speed drive
Variable-speed drive
The variable-speed drive consists of two clutches and a drive belt:
- Drive clutch is attached to the engine.
- Driven clutch is attached to the transaxle.
Features include:
- The engine braking system utilizes a tight belt for operation, requiring an idler sleeve on the primary clutch for neutral. The secondary clutch is a build-on-shaft design that utilizes a cam to tune the acceleration and deceleration of the vehicle. The clutch will stay engaged, providing deceleration until approximately 5 km/h (3 mph).
- The continuously variable transmission (CVT) air intake draws in cool air to reduce heat and the amount of water ingestion into the CVT system. The system will reduce belt slippage and improve durability.
- A low- and high-speed forward gear offering:
- Low range is 0 km/h to 40 km/h (0 mph to 25 mph), XUV835
- Low range is 0 km/h to 24 km/h (0 mph to 15 mph), XUV865
- High range is 0 km/h to 72 km/h (0 mph to 45 mph), XUV835
- High range is 0 km/h to 45 km/h (0 mph to 28 mph), XUV865
- Ability to creep along slowly to maneuver in tight spaces
- Standard full-clutch enclosure with high speed fan provides longer belt and clutch life
- High-ratio clutches with three cam weights for maximum belt-clamp load in high torque conditions
NOTE: Delivery of torque to the ground and top speed depends on tire size, which is a function of nominal size and pressure.
How the variable-speed drive works:
- As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
- As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
- With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
- The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.
Transaxle, mechanical front-wheel drive (MFWD), and constant velocity (CV) shafts
Side view of CVT intake and clutch enclosure
Differential lock switch and MFWD switch
Rear view of transaxle and CV shafts
CV boot protection
Operator interface features:
- Selectable four-wheel drive (4WD) system with a limited slip front differential and dash-mounted electronic rocker switch
- Provides exceptional traction in challenging conditions
- Near instantaneous torque to the front wheels once rocker switch is engaged
- Maintains turf-friendly operation in two-wheel drive (2WD) mode
- Combined with rear traction assist (differential lock), provides excellent traction in challenging conditions
- More control descending hills with 4WD engaged as all four wheels help slow the vehicle down
- Clutch engagement still necessary to prevent free coasting
Transaxle features:
- Low, high, neutral, reverse, and park transaxle
- Automotive-style, integrated park position in transmission
- Low range for maximum torque delivered to the wheels for hauling, pushing, and pulling
- High range for maximum vehicle speed
- To shift out of park, service brake must be pressed to release the parking solenoid. An audible click will be heard and allows the vehicle to shift out of park into the desired gear.
NOTE: Differential design reduces scuffing of the turf during turns because it allows the inside wheels to turn slower than the outside wheels.
- Start in gear, neutral, or park position for quick starting. The service brake must be engaged to start when in gear or neutral.
- For operators living in regions with homologation requirements or certain bid language stating the need for a secondary park brake, such as governmental or municipalities, a secondary park brake is available as an option on select models:
- HPX615E
- HPX815E
- XUV825 S4
- XUV855 S4
- XUV835M
- XUV835R
- XUV865M
- XUV865R
- Large, sealed bearings are located inside the housing for better protection and durability
- Contains gear case for transferring power to the MFWD
- Splined shaft interfaces for maximum torque transfer and durability
- All drive gears machined from highest grade gear steel
- Protected by a skid plate
MFWD features:
- Electronically selectable by the operator
- Offers limited slip functionality for precision steering and great traction while pointing and shooting out of a corner.
- Vertically oriented oil drain for easy maintenance
- Protected by a steel skid plate and frame
Drive shaft features:
- Rear CV shaft diameter measures 27 mm (1.1 in.) and is designed for peak engine and braking torque
- Front CV shaft diameter measures 23 mm (0.91 in.) and is designed for peak engine torque
- Propshaft is designed for peak engine torque
- All CV shaft and propshaft joints are maintenance free and protected by exclusive thermoplastic elastomer (TPE) boots for durability
Extra-durable deluxe cargo box ensures hard-working performance and longevity
Deluxe cargo box with optional light protectors
Top view of cargo box
The deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust and dents and reduces noise.
Deluxe cargo box tailgate
Tailgate handle
Tailgate open
Tailgate lowered to 150 degrees
The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate has been improved, features truck-like performance, and can be operated with one hand.
The standard-installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.
Deluxe cargo box tilt
Integrated handle for manual cargo box tilt
The deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist.
A prop rod is provided to hold the box in the upright position for operator convenience, as well as limit box pivot travel.
Integrated tie-down points
Integrated tie-down point in cargo-box bed
Additional tie-down points (TH 6X4 shown)
The deluxe cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:
- Four corners inside the cargo box bed
- Four points on the load guard directly behind the operator station (A)
- Tie-down bars on either side of the cargo box (B)
- Six points on the underside of the cargo box frame (circled)
Converting deluxe cargo box to a flatbed
XUV835 Cab shown
XUV835M Cab shown
Optional accessories for the deluxe cargo box:
- See attachment information in the Value Selling Navigator
Specifications
| Length |
1143 mm (45 in.) |
| Width |
1320 mm (52 in.) |
| Depth |
304 mm (12 in.) |
| Volume |
0.46 m3 (16.4 cu ft) |
| Weight capacity |
454 kg (1000 lb) |
| Dump angle |
47 degrees |
CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.
Attachment-ready electrical system
On M- and R-trim vehicles, adding attachments and accessories is made easier by the inclusion of some main wiring harnesses that facilitate efficient hook-up.
Roof harness electrical port
Main vehicle harness ™ winch connection
| |
Cargo box lift |
Backup alarm |
Brake / tail / reverse lights |
Speed limiter kit |
Base radio |
Heater |
2041-kg (4500-lb) winch |
Premium radio (base radio kit needed) |
LED lights - front OPS |
Windshield wiper |
Windshield washer |
LED lights - brush guard |
LED headlights |
Turn signals |
Horn |
Beacon light |
LED lights - rear OPS |
Sprayers |
Spreaders |
AMS integration kit |
| E |
|
|
|
|
|
a |
a |
a,c |
a,c,d |
a,c,d |
a,c,d |
a,b |
a,b |
a,b |
a,b |
a,c,e |
a,c,e |
a,f |
a,f |
a,c,e,f |
| M open |
|
|
|
|
|
|
|
c |
c,d |
c,d |
c,d |
b |
b |
b |
b |
c,e |
c,e |
f |
f |
c,e,f |
| M cab |
|
|
|
|
|
|
|
|
|
|
|
b |
b |
b |
b |
e |
e |
f |
f |
e,f |
| R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
f |
f |
f |
| |
= connections in base harness |
| a |
E-spec attachment harness |
| b |
Front attachments harness |
| c |
Roof attachment harness |
| d |
Front cab harness |
| e |
Rear cab harness |
| f |
Dash port harness |
| * |
If blank, the base chassis harness has the connector for the attachment |
If dual beam headlights are desired, the following bundles are required:
XUV835E/865E:
- BM26589 ™ dual beam LED headlights, including three-position rocker switch
- BUC10809 ™ front light harness kit
- BUC10810 ™ E-spec attachment harness
XUV835M/865M:
- BM26589 ™ dual beam LED headlights, including three-position rocker switch
- BUC10809 ™ front light harness kit
XUV835R/865R:
- BM26589 ™ dual beam LED headlights, including three-position rocker switch
Equipped with power steering
This Gator© XUV Crossover Utility Vehicle is equipped with power steering and a dual A-arm front suspension. These automotive-type systems exhibit excellent handling characteristics, as well as responsive steering and low steering effort:
- Steel ball-bearings secure the steering shaft and deliver smooth, responsive operation
- Completely sealed rack and pinion for long life
- Low steering ratio (lock-to-lock) provides more responsive steering and less operator input
- Shaft U-joints are phased for a smooth, uninterrupted motion of the steering wheel
- Tilt steering wheel with 15 degrees of travel
Electric power-assist steering system
Electric power-assist steering (EPAS) system has advanced features:
- Anti-kickback feature reduces the amount of steering unwinding when traversing difficult terrain.
- The system is speed-sensing and adjusts steering effort as the speed of the vehicle changes.
- As speed increases, there is less steering assist for improved road feel.
- As speed decreases, steering assist increases to give lower steering efforts for improved maneuverability.
- A warning/functional light on the instrument panel provides self-diagnostics and a warning light in the situation of no assist.
- Torque sensor measures steering wheel input so the on-board computer can provide the appropriate output for various driving situations.
With the EPAS system, the operator maintains a direct mechanical linkage from the steering wheel to the front wheels. The power steering system interfaces mechanically with the steering system by being inserted between the steering wheel and the rack-and-pinion assembly.
A differential torque sensor is integrated into the power steering assembly. The circuit board assembly is also integral with the power steering assembly.
Power steering does not reduce turning radius but significantly reduces steering effort by approximately 85 percent compared to models without power steering.
EPAS interface diagram
EPAS interface diagram
The numbered descriptions refer to the EPAS interface diagram shown above:
- Torque sensor
- Electronic control unit (ECU)
- Fail-safe relay
- Current/thermal control circuit
- Reduction gears
- DC motor
- Rack and pinion
- Function/warning light
- Key power and ground
- Vehicle speed sensor
- Instrument cluster
- Relay module
The M trim adds electrical power-assist steering (EPAS) and brings in the main wiring harness for easier attachment hook-up. Cabs are available in this trim level. Heating, ventilation, and air conditioning (HVAC) is also an option within the M-trim level.
Build-to-order options
- Roof standard on all units ™ can order less roof on open station units
- Available factory-installed winch on M- and R-trim units
- Available factory-installed front glass windshield on M-trim open station units
- Available factory-installed rear glass panel on M-trim open station units
- Available factory-installed brush guard
- Available factory-installed brush guard extensions
- Available factory-installed rear cargo box fender guards (rear bumper required, also factory installed)
19 L (5 gal) Pail Holder - BM23849
Cargo box pail holder
Cargo box pail holderThe 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.
Cargo Bed Extender - BM25700
Cargo bed extender
Cargo bed extenderThe cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.
Cargo Box Bed Mat - BM22772
Deluxe cargo box bed matThe deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.
Cargo Box Divider - BM22769
Cargo Box Side Extension Kit - BM24901
Cargo box side extension kit The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.
Product features include:
- Four-sided structure that increases cargo box side height to 533 mm (21 in.) and volume to 0.74 m3 (26 cu ft)
- Mounted on the sides and front with hardware, while the tailgate can be attached or removed without tools
- Tailgate pivots at the top (similar to a dump truck) for ease of dumping loose material
- Laser-cut, heavy-gauge, powdered-coated steel provides excellent durability
- Compatible with all model year 2011 to current Gator XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and M-Gator A2 Utility Vehicles
- Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
- Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles.
- Compatible with Gator cabs and bedliner
NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.
Cargo box side extensions cover - BUC10156
Cargo box side extension kit (required, sold separately)
Cargo box side extensions cover
Tailgate down, side extension flipped upKey features
- The cover closes off the top of the side extensions, ideal for hauling hunting dogs and small animals
- Easily attaches to the side extension kit (required, sold separately)
- Dimensions: 132-cm (52-in.) wide x 65-cm (25.5-in.) tall x 114-cm (45-in.) deep
Compatibility
- Model year 2011 to current XUV625i, XUV825i/E/M, XUV825i/E/M S4, XUV855D/E/M, and XUV855D/E/M S4 Utility Vehicles
- Model year 2010 to current TX, TX Turf, TH, and TE Utility Vehicles
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Model year 2018 to current HPX615 and HPX815 Utility Vehicles
Label kit for toolboxes (Green & Yellow) - BM26220
Spare Tire Carrier - BM25577
Spare tire carrier
Spare tire carrierEasily mount a spare tire to the side of the cargo box with this convenient kit.
Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.
Sportsman Gear Bag - LP67754
Sportsman gear bag (closed)
Sportsman gear bag (open)
Quick-connect latches on cargo boxKey features
- Holds two firearms up to 1.3 m (51 in.) in length
- Firearm support blocks can be removed to transport a wide array of gear
- Bag easily attaches and detaches to cargo box with quick-connect latches for easy storage in the off season
- Convenient carry straps
- Made from waterproof, mildew- and abrasion-resistant material to keep gear dry
- Oversized, corrosion-resistant zippers for durability and ease of use
- Rain flap covers the zipper to prevent water infiltration
Compatibility
- Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model year 2010 to current TX, TX Turf, TH, and TE Utility Vehicles
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone
Adaptor Parts for Engine Coolant Heater - AM882530
Engine coolant heater
Adapter partsAttached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.
Engine Coolant Heater (110 V) - AR87167
Engine coolant heater Adapter parts Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.
Deluxe Cargo Box Cover- Camo - LP19879
Deluxe cargo box cover (shown in black)The deluxe cargo box cover easily installs without tools and keeps the cargo secure and protected from the elements. It is compatible with Gator Utility Vehicles equipped with the all-new deluxe cargo box.
Compatible with all model year 2011 - current Gator XUV 625i, XUV 825i, XUV 855D, TX, TX Turf, TH 6X4, TE, M-Gator™ A2, and M-Gator A3 Utility Vehicles.
Compatible with all model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles.
Ordering information
Please contact your local John Deere dealer for availability and pricing information.
Deluxe cargo box cover - Camo
Order number: LP19879
Vehicle storage cover - LP68148
Vehicle storage cover
Vehicle storage coverKey features
- All-season protection against sun damage, rain, dust, and tree sap
- Reinforced corners for added durability
- Fabric coated for maximum water resistance and repellency
- Elastic shock cord in bottom hem for a quick, custom fit
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone
48mm (1 7/8-in.) hitch ball for ball-type hitch. Ball Mount sold separately. - PM05101
48-mm (1-7/8-in.) hitch ballThe 48-mm (1-7/8-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.
The ball hitch is available through Service Parts.
51mm (2-in.) hitch ball for ball-type hitch. Order ball mount separately. - PM05201
48-mm (1-7/8-in.) ball hitch shown The 51-mm (2-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.
The ball hitch is available through Service Parts.
Drawbar/ ball mount for 51mm (2 in.) receiver hitch. Hitch Ball sold separately. - BM22290
Drawbar kit for receiver hitchDescription:
- Kit includes a 51-mm (2-in.) drawbar, 10-mm (0.39-in.) pin, and hair cotter pin
Steel construction has a 25-mm (1-in.) ball hole size
Can be mounted in the standard rear receiver hitch or the optional front receiver hitch
- Compatible with all Gator model year 2011-current XUV560, XUV560 S4, XUV590, XUV590 S4, XUV 625i, XUV 825, XUV 855, RSX860, and M-Gator™ A2 Utility Vehicles
- Compatible with HPX 615 and 815 Utility Vehicles
Compatible with XUV 620i and XUV 850D Utility Vehicles
NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.
Front Hood Rack - BM26109
Hood rack
Hood rack (hinged forward)Key features
- 124.5-cm (49-in.) long x 36-cm (14.25-in.) wide x 11-cm (4.25-in.) deep
- Welded steel tubing
- Design allows for convenient tie-down points to secure load
- 45-kg (100-lb) capacity
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Requires brush guard to be installed
MOLLE Device Pouch - Black - LP66151
MOLLE device pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Velcro flap closure
- Padded to protect device and contents
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 6-in. (152.4-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE Device Pouch - Camo - LP66150
MOLLE device pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Velcro flap closure
- Padded to protect device and contents
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 6-in. (152.4-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE Fire Extinguisher Pouch - Black - LP66153
MOLLE fire extinguisher pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Military-grade rapid extraction clips
- Fits standard round 2.5-lb (1.1-kg) fire extinguishers
- Padded to protect contents
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 6–in. (152.4-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE Fire Extinguisher Pouch - Camo - LP66152
MOLLE fire extinguisher pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Military-grade rapid extraction clips
- Fits standard round 2.5-lb (1.1-kg) fire extinguishers
- Padded to protect contents
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 6–in. (152.7-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE Large Pouch - Black - LP66149
MOLLE large storage pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Dual military-grade zippers and pulls
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 5–in. (127-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE Large Pouch - Camo - LP66148
MOLLE large storage pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Dual military-grade zippers and pulls
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 5–in. (127-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE Small Pouch - Black - LP66147
MOLLE small storage pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Military-grade zippers and pulls
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 5–in. (127-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
MOLLE Small Pouch - Camo - LP66146
MOLLE small storage pouchAvailable through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Military-grade zippers and pulls
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 5–in. (127-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
Brushguard extensions - BUC10141
CV Guards - front & rear - BM25863
Front CV guards
Rear CV guardsKey features
- Kit contains both front and rear CV guards
- Additional added protection for the A-arms and CV joints
- High-strength, formed steel guards handle impacts while maintaining a low, unsprung mass to provide exceptional ride quality
- Easily bolts to the A-arms
- Drainage holes on the bottom of the guards prevent buildup of dirt, grass, and other loose materials
Compatibility
- Model year 2018 XUV835 and XUV865 Utility Vehicles
Cargo Box Fender Guard - BM26129
Cargo box fender guardsKey features
- Connects with rear bumper (required – sold separately)
- Provides enhanced styling in addition to heavy-duty protection to the side of the cargo box
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Front Fender Guard - BUC10247
Front fender guards - shown with brush guard (required) and brush guard extensions (optional)Key features
- Easily attaches to the brush guard (required – sold separately)
- Provides protection to the front fender area
- NOTE: With fender guards installed, the overall width of the vehicle increases to 1.75 m (69 in.).
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Rear panel glass protector - BUC10245
Rear-panel glass protectorKey features
- Provides protection to the cab rear-panel glass
- NOTE: Never carry loads in the cargo box over the load guard.
- Perforated, black metal screen easily attaches to the cab rear panel (required – sold separately)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Front Attachment Harness - BM26265
Front attachment harnessKey features
- The front attachment harness includes connections for the following kits:
- Light-emitting diode (LED) headlights
- Turn signals
- Horn
- Brush-guard-mounted auxiliary lights
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Front Attachment Harness (dash port) - BM26268
Dash port harness connection
Dash port harness – lower connectorsKey features
- The front attachment harness (dash port) includes connections for the following kits:
- Rear sprayer
- Rear spreader
- Blades
- GreenStar™ Display as part of the Ag Management Solutions (AMS) integration kit
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Rear Cab Attachment Harness - BM26739
Rear cab attachment harnessKey features
- The rear cab attachment harness includes connections for the following kits:
- Rear auxiliary lights
- Beacon light
- Ag Management Solutions (AMS) receiver harness
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Beacon light in up position
Beacon light in down position
Backlit beacon light switchKey features
- 76-mm (3-in.) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
- Especially useful for working around properties and job sites
- Acrylic amber lens resists scratching and scuffing
- Impact-resistant nylon housing
- Society of Automotive Engineers (SAE) J845 (Class 3)-compliant
- UL® recognized
- Flash rate: 60 +/- 10 fpm
- Stands 21.3-cm (8.4-in.) tall from roof/occupant protective structure (OPS)
- Folds down out the way when not in use
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
| XUV835/865 | Attachment harness required (see below) |
| E | 1, 3, 5 |
| M (open station) | 3, 5 |
| M (cab, factory installed) | 5 |
| R | --- |
| 1 | E-spec attachment harness |
| 2 | Front attachment harness |
| 3 | Roof attachments harness |
| 4 | Front cab harness |
| 5 | Rear cab harness |
| 6 | Dash port harness |
UL is a trademark of UL LLC.
LED Driving Lights (2 Lights) - BM26215
Front cab mounted
Rear cab mounted
Brush guard mountedKey features
- The LED driving lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
- Beam pattern: driving (focused, intense beam of light good for illuminating a stretch of road directly in front of the vehicle)
Driving beam pattern – mounted on brush guard
Driving beam pattern – mounted on OPS/roof- Lamp sealing: IP69K
- Light output (per light): 1150 lumens
- LED color temperature: 5000 K
- Amp draw (per light): 1.4 amps
- 6 LEDs per light
- Aluminum housing
Compatibility
- Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- HPX Utility Vehicles
LED Headlights (2) - BM26589
LED headlights
Three-position backlit light switchKey features
- Upgrade from halogen headlights
- High/low beam
- Raw lumen output (per light): 1,075 (high beam), 430 (low beam)
- Effective lumen output (per light): 720 (high beam), 240 (low beam)
- Nominal LED color temperature: 5000 K
- Current draw: 1.14 amps (high beam), 0.41 amps (low beam)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
| XUV835/865 | Attachment harness required (see below) |
| E | 1, 2 |
| M (open station) | 2 |
| M (cab, factory installed) | 2 |
| 1 | E-spec attachment harness |
| 2 | Front attachment harness |
| 3 | Roof attachments harness |
| 4 | Front cab harness |
| 5 | Rear cab harness |
| 6 | Dash port harness |
LED Work Lights (2 Lights) - BM26216
Front cab mounted Rear cab mounted Brush guard mounted Key features
- The LED work lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
- Beam pattern: flood (spread of light over a wider, shorter distance)
Flood beam pattern – mounted on OPS/roof- Lamp sealing: IP69K
- Light output (per light): 1200 lumens
- LED color temperature: 5000 K
- Amp draw (per light): 1.4 amps
- 6 LEDs per light
- Aluminum housing
Compatibility
- Model Year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model Year 2018 to current XUV835 and XUV865 Utility Vehicles
- Model Year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- HPX Utility Vehicles
Tail Light Protectors - BM22773
Brake and taillight protectorThe brake and taillight protector offers increased protection to the taillight assembly from incidental contact.
Rear View Mirror - BM26477
Rearview mirrorKey features
- Convex mirror reflects a wide-angle image to help the operator see behind the vehicle
- Connected to ball stud for easy adjustment
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Side Mirrors (open station & cab doors) - BUC10310
Base radio kit - BUC10615
Lower left speaker
Lower right speaker
Head unit (sold separately) installedKey features
- Kit includes:
- Wiring harness
- AM/FM antenna
- Head unit mounting bracket
- Two 13.3-cm (5.25-in.) speakers
- Jensen® speakers
- Waterproof
- 45-W root mean square (RMS) power each
- 135-W peak power each
- The head unit is sold separately through Parts. The operator must choose one of the following three head units to complete the stereo:
- SWJHD1130 – heavy-duty stereo with AM/FM, weatherband, and auxiliary input
- SWJHD1635BT – heavy-duty stereo with AM/FM, weatherband, auxiliary input, SiriusXM® satellite radio, and Bluetooth® wireless technology
- SWJHD36AMIC – heavy-duty stereo with AM/FM, weatherband, compact disc (CD), auxiliary input, SiriusXM satellite radio, USB 2.0, and Bluetooth wireless technology
NOTE: Must order head unit through Parts.
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Jensen is a trademark of Electronics Trademark Holding Company LLC. SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc.
Premium speaker kit - BUC10619
Upper speakers
Subwoofer
Bluetooth® microphone
SiriusXM® Radio antenna/tunerKey features
- Kit includes:
- Wiring harnesses
- SiriusXM® radio antenna/tuner (XM ready head unit required – sold separately)
- Two 13.3-cm (5.25-in.) upper speakers
- Subwoofer
- Bluetooth® wireless microphone
- Jensen® speakers
- Waterproof
- 45-W root mean square (RMS) power each
- 135-W peak power each
- Jensen subwoofer
- Waterproof
- 20.3-cm (8-in.) amplified subwoofer
- Maximum power: 200 W
- Aluminum mesh grille
- Aluminum housing
- The head unit is sold separately through Parts. The operator must choose one of the following two head units to complete the stereo:
- SWJHD1635BT – heavy-duty stereo with AM/FM, weatherband, auxiliary input, SiriusXM satellite radio, and Bluetooth technology
- SWJHD36AMIC – heavy-duty stereo with AM/FM, weatherband, compact disc (CD), auxiliary input, SiriusXM satellite radio, USB 2.0, and Bluetooth technology
NOTE: Must order head unit through Parts.
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Requires base radio kit
SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. Jensen is a trademark of Electronics Trademark Holding Company LLC.
Bench seat cover (black) - LP68162
Bench seat cover
Modular Lightweight Load-carrying Equipment (MOLLE) attachment locationKey features
- Protection for the bench seat from wear and stains
- Constructed with military-grade Cordura® fabrics
- Quick and easy installation
- MOLLE attachment locations (MOLLE attachments available through Order Zone)
- Easy access to seatbelts
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone
Cordura is a trademark of INVISTA North America S.à.r.l.
Bench seat cover (camo) - LP68420
Bench seat cover (yellow) - LP68149
Bench seat coverKey features
- Protection for the bench seat from wear and stains
- Elastic-hem cord closure for easy adjustment
- Easy access to seatbelts
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone
Gator toolbox shown on TH 6x4 with deluxe cargo box
Gator toolbox - openQuality constructed from 16-gauge, 1.52-mm (0.06-in.) steel, this industrial toolbox is durable enough to handle wear and tear even from the toughest contractors. This toolbox keeps tools, equipment, and other valuables secure, clean, dry, and protected from outside elements thanks to full weather seal locks and a rust-resistant, powder-coat paint application. Twin commercial-grade gas shocks automatically lift lid for effortless one-handed open and close. It comes complete with key locks to guard against theft.
Product attributes:
- Two lids hinged at the middle allows access from both sides of the vehicle
- Extra-wide lid opening allows easy access to tools and valuables
- Key locks guard against theft (two keys provided)
- Compatible with Gator TX, TH, TE, XUV625i, XUV825i/E/M, XUV825i/E/M S4, XUV855D/E/M, XUV855D/E/M S4, XUV835E/M/R, and XUV865E/M/R Utility Vehicles equipped with the deluxe cargo box as shown in the picture above
- Also compatible with model year 2018 and newer HPX615 and HPX815
Ordering information
Please contact a local John Deere dealer for availability and pricing information.
Gator tool box
Order number: LP19886
For more information:
| Call: | Toll-free 1-877-JD-KLEEN (1-877-535-5336) |
| Fax: | 1-563-556-1235 |
| Mail: | Mi-T-M Corporation
50 Mi-T-M Drive
Peosta, IA 52068 |
| Email: | [email protected] |
| Website: | www.mitm.com |
Label kit for toolboxes (Camo) - BM26219
Label kit for toolboxes (Olive & Black) - BM26218
Side Opening Toolbox - BM26160
Side-door opening toolbox This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Side-door opening toolbox features:
- 125-L (33-gal.) sealed storage
- Heavy-gauge sheet metal
- D-rings for tie downs
- Fully sealed lockable latch
- Sealed door
- Door can also be used as a work bench when down
- Can be mounted on either side of the cargo box
| Side-door opening toolbox |
Toolbox weight | 29 kg (64 lb) |
Toolbox capacity | 34 kg (75 lb) |
Toolbox dimensions | -Full box: 109.4-cm (43.1-in.) long X 35-cm (13.8–in.) wide X 32.5-cm (12.8–in.) tall -125-L (33-gal) total volume |
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:
- BM26220 – green and yellow
- BM26218 – olive and black
- BM26219 – camo
This toolbox is compatible with the following Gator™ Utility Vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model Year 2018 and newer HPX615 and HPX815
Tailgate w/ brake and tail lights for toolboxes - BUC10393
Tailgate with brake lights and taillightsThis tailgate kit with brake lights and taillights is specifically designed for compatibility with the top and side-door toolboxes (BM26162 and BM26160).
The tailgate can be installed in minutes once the toolbox and tail lights are installed by bolting them to the tailgate bracket.
Optional label kits are designed to fit with this tailgate:
- BM26220 – green and yellow
- BM26218 – olive and black
- BM26219 – camo
The tailgate is compatible with the following Gator™ utility vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model Year 2018 - current HPX615 and HPX815
Top Opening Toolbox - BM26162
Top-door opening toolboxThis custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Top door opening toolbox features:
- 125-L (33-gal.) sealed storage
- Heavy-gauge sheet metal
- D-rings for tie downs
- Fully sealed lockable latch
- Sealed door
- Toolbox divider
- Removable tool tray
- Can be mounted on either side of the cargo box
| Top door opening toolbox |
Toolbox weight | 32.7 kg (72 lb) |
Toolbox capacity | 32.7 kg (75 lb) |
Toolbox dimensions | -Tray: 27.4-cm (10.8-in.) long x 21.8-cm (8.6-in.) wide x 7.1-cm (2.8–in.) deep -Left-hand side compartment: 46.2-cm (18.2–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9–in.) tall -Right-hand side compartment: 62.7-cm (24.7–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9-in.) tall -125-L (33-gal.) total volume |
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:
- BM26220 – green and yellow
- BM26218 –olive and black
- BM26219 – Camo
This toolbox is compatible with the following Gator™ Utility Vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model year 2018 and newer HPX615 and HPX815
WARN ProVantage 2041 kg (4500 lb) Winch - BM26251
2041.2-kg (4500-lb) winch (chassis mounted)
Plug-in remoteKey features
- Impressive pulling capacity of 2041.2 kg (4500 lb)
- Equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities
- Includes a 3-m (10-ft), water-resistant, plug-in remote for safe distance operation that plugs directly into the glove box
- 15 m (50 ft) of 5.6-mm (7/32-in.) synthetic rope with hawse fairlead. Synthetic rope does not develop sharp burrs like steel rope and does not store as much potential energy when under load.
- Ergonomic clutch handle
- Limited lifetime, 3-year electrical (North America) warranty offered through WARN
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- M-spec and R-spec vehicles come from the factory winch ready, and no additional attachment harnesses are required.
- Requires winch mounting kit to mount the winch either on the chassis or on the front/rear receivers
Electrical harness requirements
| XUV835/865 | Attachment harness required (see below) |
| E | 1 |
| 1 | E-spec attachment harness |
| 2 | Front attachment harness |
| 3 | Roof attachments harness |
| 4 | Front cab harness |
| 5 | Rear cab harness |
| 6 | Dash port harness |
WARN is a trademark of WARN Industries, Inc.
Winch Accessories Kit - BM21392
Winch accessories kitDouble the pulling power, change the pulling direction, and keep the winch in proper working order.
The accessories kit is essential gear for operators getting the most out of their winch:
Effectively anchors to trees/boulders
Change the pulling direction
Double the pulling capacity
The accessories kit includes:
Flexible tree strap
Snatch block
Shackle
Each kit comes in a black Cordura® heavyweight-nylon soft case.
Cordura is a trademark of INVISTA.
Wireless Winch Remote - BM26662
Wireless winch remote
Wireless winch remote mounted on XUV835Key features
- Wirelessly control winch from up to 15 m (50 ft) away
- Weatherproof transmitter has two large buttons, making it easy to operate even while wearing gloves
- Colored light-emitting diode (LED) lights provide clear operator feedback
- Kit includes wireless transmitter, receiver, holster, wiring, and mounting hardware
Compatibility
- Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
4500LB Winch Mounting Kit - BM26252
2041.2-kg (4500-lb) winch (chassis mounted) Key features
- Kit includes everything needed to mount the winch to the chassis
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Requires WARN ProVantage 2041.2-kg (4500-lb) winch (sold separately)
WARN is a trademark of WARN Industries, Inc.
4500LB Winch Receiver Mount - BM26393
2041.2-kg (4500-lb) winch (mounted on front receiver)
2041.2-kg (4500-lb) winch (mounted on rear receiver)Key features
- Ability to mount the winch on the front or rear receiver
- Kit includes everything needed to mount the winch to the receivers
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Requires WARN ProVantage 2041.2-kg (4500-lb) winch (sold separately)
WARN is a trademark of WARN Industries, Inc.
