John Deere H380

Feature Overview
John Deere H380
  • Superior strength and visibility
  • For heavy-duty chores
  • Parking stands are integrated on the loader
Maximum lift height (A) 4499 mm / 177 in.
Clearance at full height - bucket dumped (C) 3438 mm / 135 in.
Dump angle, degrees (E) -69 degree (angle)
Rollback angle, degrees (G) 44 degree (angle)
Feature Overview
John Deere H380
  • Superior strength and visibility
  • For heavy-duty chores
  • Parking stands are integrated on the loader
Maximum lift height (A) 4499 mm / 177 in.
Clearance at full height - bucket dumped (C) 3438 mm / 135 in.
Dump angle, degrees (E) -69 degree (angle)
Rollback angle, degrees (G) 44 degree (angle)
We are here to help
Features

False rod bucket cylinders improve productivity

False rod cylinderFalse rod cylinder
#

Fast bucket cycle times are important to dump the load from the bucket as quickly as possible, (quite often) in order to be as productive as possible, while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the mechanical self-leveling loaders.

 

Therefore, all MSL H-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.


Hydraulic shut-off valve (open position)Hydraulic shut-off valve (open position)
Hydraulic shut-off valve (closed position)Hydraulic shut-off valve (closed position)

A hydraulic shut-off valve is included with the H-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.


Concealed oil lines through boom armConcealed oil lines through boom arm
#
Oil lines routed through the boom armOil lines routed through the boom arm
Oil lines routed through the torque tubeOil lines routed through the torque tube

Over time, increased width in tractor hoods have caused issues with available space for running traditional oil lines of a loader along the boom, making them more susceptible to damage.

 

To improve this situation, the oil lines have been routed through the boom arm and the torque tube, improving line protection and the appearance of the loader.


Parking standsParking stands
#

John Deere loaders are easily removed and reinstalled on tractors without tools. The parking system allows removing or attaching the loader to the tractor in minutes without the need for tools.

 

To remove or park the loader, apply slight down pressure to the loader boom with the bucket dumped at approximately a 30-degree angle. With the tractor in park, install the parking stands and place the mast pins in the open position.

Removing or parking the loader (7R/H480 Shown)
Bucket slightly dumped and down pressure (7R/H480 Shown)Bucket slightly dumped and down pressure (7R/H480 Shown)
#
Parking stand in stored positionParking stand in stored position
Removing parking standRemoving parking stand
Bucket slightly dumped - Parking stands installed (7R/H480 Shown)Bucket slightly dumped - Parking stands installed (7R/H480 Shown)
Mast pin in the closed position Mast pin in the closed position
Rotating mast pin to the open positionRotating mast pin to the open position

Utilizing the boom circuit with the tractor in neutral, rotate the mast forward until the mast has rotated past the pin location on the mounting frame by extending the lift cylinder. Now using the bucket circuit, roll back the bucket until the mast is removed from the pocket and will clear the tires.

Mast pin in the open positionMast pin in the open position
Masts rotate forward, then bucket rolled back (7R/H480 Shown)Masts rotate forward, then bucket rolled back (7R/H480 Shown)

With the tractor in park, shut the engine off and relieve the hydraulic pressure as indicated for the tractor. Relieve pressure on the single-point hydraulic connection, then disconnect or open the single-point hydraulic connector.

Relieving the hydraulic pressureRelieving the hydraulic pressure
Disconnect/open single-point hydraulic connectionDisconnect/open single-point hydraulic connection

Store the loader half of the single-point connector. The tractor is now ready to back away from the loader.

Storing the hydraulic hoses (7R/H480 Shown)Storing the hydraulic hoses (7R/H480 Shown)
#
Tractor ready to be backed away from loader (7R/H480 Shown)Tractor ready to be backed away from loader (7R/H480 Shown)
Backing away from loader (7R/H480 Shown)Backing away from loader (7R/H480 Shown)
Parked loader (H480 Shown)Parked loader (H480 Shown)

Single-point hydraulic connection (open)Single-point hydraulic connection (open)
Single-point hydraulic connection (closed)Single-point hydraulic connection (closed)

The H380 Loader features a single-point hydraulic connection that also incorporates the connection point for any electrical needs in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.


Specs
Key Specs
Clearance at full height - bucket dumped (C) 3438 mm
135 in.
Dump angle, degrees (E) -69 degree (angle)
Rollback angle, degrees (G) 44 degree (angle)
Maximum lift height (A) 4499 mm
177 in.
Loader
Boom breakout force Measured at pivot (Y)
3691 kgf
8120 lbf
Measured at 800 mm ahead of pivot (Z)
3275 kgf
7205 lbf
Bucket rollback force capacity At maximum height (VV)
2611 kgf
5744 lbf
At 59-in. (1500-mm) lift height (XX)
4909 kgf
10800 lbf
At ground-level line (ZZ)
4782 kgf
10520 lbf
Base weight 1721.9 kg
Leveling configuration Mechanical Self Leveling (MSL)
Bucket used Global Heavy-Duty Bucket 2450 mm
Global Heavy-Duty Bucket 96 in.
Bucket weight 375 kg
825 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
2938 kg
6464 lb
Measured at 800 mm ahead of pivot (X)
2795 kg
6149 lb
Dimensions Maximum lift height (A)
4499 mm
177 in.
At full height - bucket level(B)
4290 mm
169 in.
At full height - bucket dumped (C)
3438 mm
135 in.
Overall length (I+F), ft (m) 5.4 m
17.8 ft
Digging depth (H) 157 mm
6 in.
Reach At maximum height (D)
917 mm
36 in.
At ground level - bucket level (F)
2621 mm
103 in.
Bucket angle Dump angle, degrees (E)
-69 degree (angle)
Rollback angle, degrees (G)
44 degree (angle)
Dump angle, ground
-91 degree (angle)
Cycle times Loader raise, seconds
4.1 seconds
Loader lower, seconds
2.6 seconds
Bucket dump, seconds
1.8 seconds
Bucket rollback, seconds
1.8 seconds
Lift capacity at full height Measured at pivot (U)
1896 kg
4171 lb
Measured at 800 mm ahead of pivot (V)
2056 kg
4523 lb
Tractor
Model 6170M
Front tire 540/65R34
Rear tire 710/70R42
Front axle configuration MFWD w/ Limited Slip Differential
Wheelbase 2800 mm
110.2 in.
Pump capacity 114 L/min
30 gpm
Rated pressure 200 bar
2900 psi
Accessories and Attachments
Buckets:
Heavy-duty bucket (shown with grapple)Heavy-duty bucket (shown with grapple)
#

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.


Materials bucketMaterials bucket
#

Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.

 

NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.


Heavy-duty bucket (shown with grapple)Heavy-duty bucket (shown with grapple)
#

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.


Cutting Edges:
Replaceable wear edgeReplaceable wear edge
#

For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:

  • 1850-mm (73-in.) width replaceable cutting edge
  • 2150-mm (85-in.) width replaceable cutting edge
  • 2450-mm (96-in.) width replaceable cutting edge
  • 2750-mm (108-in.) width replaceable cutting edge

Replaceable wear edgeReplaceable wear edge
#

For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:

  • 1850-mm (73-in.) width replaceable cutting edge
  • 2150-mm (85-in.) width replaceable cutting edge
  • 2450-mm (96-in.) width replaceable cutting edge
  • 2750-mm (108-in.) width replaceable cutting edge

EH Valve:

E-ICV Valve and Parts (3rd Function) - BW15118


E-ICV Valve and Parts (3rd Function) - BW15987


E-ICV Valve and Parts (3rd Function) - BW15988


EH Mounting Parts - BW15119


EH Valve - BW14366


Mid-Mount E- ICV Valve and Parts (3rd Function) - BW15314


Guards:
Lower position without front weight bracketLower position without front weight bracket
Hood guard with front weights Hood guard with front weights
Hood guard folded for servicingHood guard folded for servicing
Hood guard design allows for full lightingHood guard design allows for full lighting

The heavy-duty hood guard is compatible with 7030, 7030 Premium, 6615, 6715, 7220, 7320, 7420, and 7520 Tractors.

 

The basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night

 

The hood guard:

  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

 

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so the front weight is the first point of contact against lower stationary objects.

 

If a front weight is not used, the lower bar can be moved downward to improve the protection of the grille below the lights.

 

The features of the hood guard include:

  • Folds down to allow the hood to open and provide access to the battery and filter
  • Extra steel behind the mainframe to increase strength
  • High height to better protect the top of the hood

7000 and 7010 hood guard7000 and 7010 hood guard

The hood guard is highly recommended for all tractors. The basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is to allow the front weight bracket to be the first point of contact against lower stationary objects.


7000 and 7010 hood guard7000 and 7010 hood guard
#

This hood guard is compatible with 7600 7610, 7700, 7710, 7800, and 7810 Tractors.


The basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon
    or mixer
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight, so the front weight is the first point of contact against lower stationary objects.


Hoses and Parts:

Hoses and Parts (2 Function) - BW15123


Hoses and Parts (3 Function) - BW15093


Hoses and Parts (3rd Function) - BW16113


Hoses and Parts (3rd Function) - BW16187


Hydraulic Connections:
Single-point hydraulic connectionSingle-point hydraulic connection

The H380 Loader features a single-point hydraulic connection that also incorporates the connection point for any electrical needs in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.


Single-point hydraulic connectionSingle-point hydraulic connection

The H380 Loader features a single-point hydraulic connection that also incorporates the connection point for any electrical needs in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.


Hydraulic Controls:

The loader hoses are connected to the mid-tractor selective control valves (SCVs).


The loader hoses are connected to the mid-tractor selective control valves (SCVs).


3 Function Hydraulic Hoses and Controls - BWA1536


3 Function Hydraulic Hoses and Controls - BWA1537


3 Function Hydraulic Hoses and Controls - BWA1532


3 Function Hydraulic Hoses and Controls - BWA1533


3 Function SLC, ICV, Hoses and Parts - BWA1534


3 Function SLC, M-ICV, Hoses and Parts - BWA1566


3 Function SLC, M-ICV, Hoses and Parts - BWA1568


The loader hoses are connected to the mid-tractor selective control valves (SCVs).


3 Function SLC, Rear Mount Loader Control Valve, Hoses and Parts - BWA1535


The loader hoses are connected to the mid-tractor selective control valves (SCVs).


Mid-Mounted Independent Control Valve (3 Function) - BW15986


Single Lever Control and Cables - BW14678


Single Lever Control and Mounting Parts (2 or 3 Function) - BW15744


Single Lever Control and Mounting Parts (3 Function with GSS) - BW15785


Single Lever Control and Mounting Parts (3 Function with GSS) - BW15784


LOADER SUSPENSION SYSTEM
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.


Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.


Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.


Miscellaneous:

Bag of Parts - BW15647


Digging teeth can be added to the heavy-duty bucket for easier digging in hard ground or for breaking loose hard-packed materials such as manure or silage. Digging teeth are not compatible with replaceable cutting edges.


Loader Boom and Bucket Valves - BW15006


Power Beyond Spacer - BW15379


Power Beyond Spacer - BW15989


Mounting Frame Components:

Mounting Brackets - BW16079


Mounting Plate - BW15170


Tool Box Bracket - BW15894


Tool Box Bracket - BW16044


Tractor Mounting Frames:

Mounting Frame - BW16134


Mounting Frame - BW16398


Right-hand mounting frameRight-hand mounting frame
Left-hand mounting frameLeft-hand mounting frame
Left and right mounting framesLeft and right mounting frames
Toolbox kit (BW15894)Toolbox kit (BW15894)
Mounting bracket (BW16044)Mounting bracket (BW16044)
Mounting bracket (BW16044)Mounting bracket (BW16044)

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.


Right-hand mounting frameRight-hand mounting frame
Left-hand mounting frameLeft-hand mounting frame
Left and right mounting framesLeft and right mounting frames
Toolbox kit (BW15894)Toolbox kit (BW15894)
Mounting bracket (BW16044)Mounting bracket (BW16044)
Mounting bracket (BW16044)Mounting bracket (BW16044)

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.


Right-hand mounting frameRight-hand mounting frame
Left-hand mounting frameLeft-hand mounting frame
Left and right mounting framesLeft and right mounting frames
Toolbox kit (BW15894)Toolbox kit (BW15894)
Mounting bracket (BW16044)Mounting bracket (BW16044)
Mounting bracket (BW16044)Mounting bracket (BW16044)

Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.


Mounting Frame - BW15889


*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group