The hydraulically controlled angle can be adjusted 30 degrees to each side to overcome the toughest spots. This feature saves time and creates professional-grade results. A loader third-function hydraulic line is required.
NOTE: AF11E models have an optional hydraulic angle adjustment available.
Attaching the Frontier AF11 and AF12 Series Front Blades to a John Deere loader is easy with the Quik-Tatch feature. Just line up the loader's connecting points to the attachment frame; then, lock the frame in place.
The loader-mounted front blade is made of heavy-duty steel to resist bending and provide longer wear capability on the Frontier™ AF11 and AF12 Series Front Blades.
The heat-treated steel cutting edge on the Frontier AF11 and AF12 Series Front Blades are reversible for twice the durability and work life.
Rubber edges are available as field-installed kits for AF11E, AF11D, AF11G, AF12D, and AF12G Front Blades. They come in various sizes and are identified below by bundles.
Rubber-top flap kits are available for AF11D, AF11G, AF12D, and AF12G Front Blades. They come in various sizes and are identified below by attachment.
|Degrees (each side)||30|
|Cutting width||213.4 cm