John Deere 660R

DEBUG Ind: Utility Tractors, Cat: Loaders, SubCat: Front End Loaders For Tractors, SubSubCat: 660r Loader
Feature Overview
John Deere 660R
  • Tool-free removal and attachment with just a few, simple steps
  • Frame design that allows for maximum maneuverability
  • Automatic Mast Latch system for quick change from loader to three-point implements
  • Repositioned leveling links for better visibility
Maximum lift height (A) 4495 mm / 177 in.
Clearance at full height - bucket dumped (C) 3481 mm / 137 in.
Dump angle, degrees (E) 60 degree (angle)
Rollback angle, degrees (G) 48 degree (angle)
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Feature Overview
John Deere 660R
  • Tool-free removal and attachment with just a few, simple steps
  • Frame design that allows for maximum maneuverability
  • Automatic Mast Latch system for quick change from loader to three-point implements
  • Repositioned leveling links for better visibility
Maximum lift height (A) 4495 mm / 177 in.
Clearance at full height - bucket dumped (C) 3481 mm / 137 in.
Dump angle, degrees (E) 60 degree (angle)
Rollback angle, degrees (G) 48 degree (angle)
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Features

Boom lockout for easy service

Hydraulic shut-off valve (open position)Hydraulic shut-off valve (open position)
Hydraulic shut-off valve (closed position)Hydraulic shut-off valve (closed position)

A hydraulic shut-off valve is included with the R-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.


RTP screen shownRTP screen shown
Hydraulic remote latch shownHydraulic remote latch shown

The R-Series Loaders come with a number of options to enhance an operator’s experience and to allow more productivity in the field. These options include lighting, hydraulic remote implement latch, loader suspension system, and industry-exclusive return-to-position (RTP) Gen2 technology with electronic self-leveling.

 

Loader lights for enhanced visibility in low-light conditions

Hydraulic remote implement latch

Return-to-Position (RTP) Gen2 with electronic self-leveling (ESL)

Loader suspension system for a smoother ride

 

All of these options are powered using a common electrical harness. Features can be added or subtracted to get the job done right.


Single-point hydraulic connection (open)Single-point hydraulic connection (open)
Single-point hydraulic connection (closed)Single-point hydraulic connection (closed)

The 620R, 640R, 660R, and 680R Loaders can be ordered with a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.


Concealed oil lines through boom arm (H-Series Loader is representative only)Concealed oil lines through boom arm (H-Series Loader is representative only)
#
Oil lines routed through the boom armOil lines routed through the boom arm
Oil lines routed through the torque tubeOil lines routed through the torque tube

Through time, increased width in tractor hoods have caused issues with available space for running traditional oil lines of a loader along the boom, making them more susceptible to damage.

 

To improve this situation, the oil lines have been routed through the boom arm and the torque tube, improving line protection and the appearance of the loader.


False rod cylinderFalse rod cylinder
#

Fast bucket cycle times are important to dump the load from the bucket as quickly as possible (quite often) in order to be as productive as possible while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the MSL loaders. 

 

All MSL R-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.


Automatic mast latch systemAutomatic mast latch system
#

R-Series Loaders are now even easier to remove and reinstall due to an automatic mast latch system. Simply exit the tractor once for removal and once for reinstall to reduce the amount of downtime associated with loader parking.

 

For a more detailed look at the steps, please refer to the operator’s manual.


To remove the loader, follow these simple steps:

  • Set the bucket flat on ground, release the hydraulic pressure, and exit the tractor.
  • Set the adjustable parking stands on the ground. 
  • Flip the lock handles located on either mast to unlock the loader from the frames.

  • Disengage the hydraulic couplers and return to the tractor seat.
  • Back away from the loader.

To reinstall the loader follow these simple steps:

  • Drive the tractor into the loader, resulting in mechanical connection (no more maneuvering the loader to fit into the frames).
  • Exit the tractor.
  • Fold up the parking stands.
  • Attach the hydraulic connection.
  • Enter the tractor and have full control of the loader.

 


Single-point hydraulic connection on the 600R Loader Single-point hydraulic connection on the 600R Loader

The R-Series Loaders feature a single-point hydraulic connection that saves the operator time when attaching or detaching the loader. This feature also incorporates the connection point for any electrical needs as well as the hydraulic lockout valve. With all hydraulic and electrical connections in one location, installation is quickly completed with the pull of a handle.

 

NOTE: Before disconnecting the hydraulic connection between the loader and the tractor, it is necessary to release the hydraulic pressure.

Single-point hydraulic connection (open) Single-point hydraulic connection (open)
Single-point hydraulic connection (closed) Single-point hydraulic connection (closed)

R-Series Loader attach and detach instruction video


600R Loader with concealed oil lines 600R Loader with concealed oil lines
#

The R-Series Loaders are designed to route the oil lines and hydraulic lines through the boom arm and the torque tube. This internal routing ensures better protection of the lines from external damage and improves the overall appearance of the loader.

600R Loader (side view) 600R Loader (side view)
600R Loader (angle view) 600R Loader (angle view)

Rear view of 600R Loader Rear view of 600R Loader

R-Series Loaders are even easier to attach and detach due to the automatic mast latch system. This feature provides efficiency to operations that require frequent loader parking. The automatic mast latch system is a mechanical lever that allows operators to remove or attach the loader with one trip out of the cab. The ease and convenience provided by the automatic mast latch system provides improvement to operation uptime.

Automatic mast latch lever Automatic mast latch lever
Visual lock/unlock indicator Visual lock/unlock indicator

R-Series Loader attach and detach instruction video


Hydraulic shut-off valve on R-Series Loader Hydraulic shut-off valve on R-Series Loader

The R-Series Loaders come equipped with a hydraulic shut-off valve to improve serviceability. When conducting brief service to the loader, close the hydraulic shut-off valve to ensure the loader does not move while operating under the equipment. This feature promotes a safe way to conduct brief maintenance without having to use support stands or removing the loader completely.


600R Loader working with 6120M Tractor 600R Loader working with 6120M Tractor
#

The MSL R-Series Loaders utilize a false rod cylinder to improve bucket performance. This bucket cylinder is designed with a smaller displacement of oil required on the head end of the cylinder, which allows the cylinder to function more quickly, decreasing operation cycle time. With the false rod cylinder design, loader applications can work more quickly and efficiently.

False rod cylinders on 600R Loader False rod cylinders on 600R Loader

600R Loader on a 6120M Tractor 600R Loader on a 6120M Tractor

The R-Series Loaders provide several options to enhance operator experience and productivity in the field. Individual options can be ordered to fit an operation’s unique set of needs. Some of the available loader options include:

  • Loader lights for enhanced visibility
  • Hydraulic remote implement latch improves uptime
  • Return-to-Position (RTP) Gen 2 with electronic self-leveling (ESL)
  • Loader suspension system for a smoother ride
Loader lights for enhanced visibility
600R Loader with light-emitting diode (LED) lights 600R Loader with light-emitting diode (LED) lights

To further enhance visibility, the 600R Loader has the option to include LED lights. With LED lights mounted onto each side of the loader boom, performing loader applications in variable operating conditions is made easier. Pairing the loader LED light option with an LED light package on the 6110M or 6120M Tractor will provide unmatched visibility to enhance operator experience during any task.

Hydraulic remote implement latch improves uptime
Two-button activation for hydraulic remote implement latch Two-button activation for hydraulic remote implement latch

The hydraulic remote implement latch allows implements to be changed quickly and efficiently.  An operator can activate the device from the cab by simultaneously pressing the two buttons installed on the right-hand side of the operator’s station. Switching from one attachment to the next can now be accomplished quickly with limited movements of the loader and without leaving the operator’s seat.

Return-to-Position (RTP) Gen 2 with electronic self-leveling (ESL)
Electronic loader joystick Electronic loader joystick

The second generation of industry-exclusive RTP Gen 2 with ESL provides a practical solution for operators with daily, repetitive, material handling needs. RTP allows the operator to set different position points for the loader with the flick of the wrist, activating the detent in electronic joysticks. With the second generation of RTP, operators can set application profiles rather than entering position points each time an application is in use. RTP Gen 2 with ESL removes repetition and fatigue from loader applications.

Loader suspension system for a smoother ride
600R Loader working with a 5100R Tractor 600R Loader working with a 5100R Tractor

The loader suspension system improves operator comfort and loader efficiency during loader operation. This system is easily activated by the operator from the cab. When activated, the loader suspension system absorbs the shock providing a smoother ride in the cab as well as reducing material loss from the bucket.


Time and cost savings with Loader Technology package preparation

The loader technology package prep provides the installed harness and controller to further install a hardware bundle that has four key features to make material handling easier and more efficient. The package is only for mid-model year 2022 and newer 6R 110 to 6R 250 Tractors when equipped with the electric joystick and mid- valves.

Technology package hardware unlocks the following loader features when DWS option code is ordered with Loader Technology package prep.

Optional Loader Technology hardware if equipped (code 9661)

  • Dynamic Weighing System (DWS)
  • Level to Horizon (LTH)
  • Return to Position (RTP)
  • Electronic self-leveling (ESL)
Loader Technology when ordered with Loader Technology package prep (code 9661)
#
Return to Position (RTP), if equipped (code 9661)

This feature moves the loader boom and bucket automatically to easily preset positions. The operator can save boom upper height, lower height  and 2 different bucket angles for both settings A and B. With a push, pull, left or right motion of the joystick just past a built in joystick detent to activate, then the loader automatically returns the boom and bucket to the preset position. This feature works great for an upper height to clear wagon and a lower bucket angle set for dumping then  returning bucket back to zero, then lower loader back to a transport position. Re-zeroing implements is easy with a zero soft button on the RTP run page.

Mid-model year 2022 6R Tractor E-ICV joystick Mid-model year 2022 6R Tractor E-ICV joystick

RTP can easily be switched off if manual operation is preferred.

Level to Horizon (LTH), if equipped (code 9661)
#

This feature levels the attachment parallel to the horizon, while conventional loader leveling systems maintain the same angle as the tractor. This means that when operating in hilly conditions, waterways, or in and out of buildings on the farm, the pallet fork, bucket, or other attachment is actively moved into a horizontal position. If this behavior is not desired by the operator, it can be turned off in the tractor display. The attachment is then leveled to the tractor if equipped with a leveling feature such as mechanical self-leveling (MSL). LTH is compatible with both self-leveling and non-self-leveling loaders

Dynamic Weighing System (DWS), if equipped (code 9661)

The DWS feature displays the current weight loaded on the attachment, such as a bucket, spear, or forks. The tractor does not need to stop for weighing, it’s constantly providing a weight reading allowing the operator to fill bucket to the required target weight without interrupting for a separate weighing cycle. Record weight with count as needed with a push of the joystick button.

It also allows the operator to create and save single material groups such as bales, feed, or fertilizer. Also, create and save a material group of up to 6 different materials. Display tracks single material group with section from material dropdown with record of count, minimum, maximum and average weight. The weighing system even registers multiple units. For example, in single material group you can count bales by 1, 2, or 3 with every loading cycle.

Operating the material group from the DWS run page by the selection of different stored material groups. Selecting the material is as easy as selecting one of listed materials and record the weight as you are loading. Weight will be recorded and count down to zero then a green checkmark will appear next to the material signifying that it has been completed, repeat until all materials have been added. A bar diagram and displayed values clearly show how much weight of the current component is still needed to achieve its target weight.

Loader camera option when ordered with Loader Technology package (code 9662)
Tractor showing the loader camera image Tractor showing the loader camera image

The loader camera provides visibility to the loader carrier and surroundings. The hooks of the carrier are visible to facilitate connecting attachments. When working with pallet forks, the fork tips are visible to assist picking up pallets with ease. The video image is shown in the built-in display of the 6R Tractor.

#

DWS is a must for windy feed yards because you can weigh your lightweight commodities in the shed without blowing feed across your yard when feathering over feed wagon getting to a target weight.

Electronic self-leveling (ESL), if equipped (code 9661)

ESL maintains bucket positioning in any range of the boom. It can be easily activated and deactivated from the run pages. Toggling between ESL and LTH is as simple as selecting which leveling operation is needed through the run page on display. ESL is compatible with both self-leveling and non-self-leveling loaders. ESL is compatible with both self-leveling and non-self-leveling loaders.

Benefits
  • Faster and easier loading of goods with RTP
  • No manual controlling of heights and angles to avoid trailers, sheds, etc.
  • Weighing on the go without the time-consuming needing to stop and perform a weighing cycle
  • No time lost returning excessive load from mixer wagons
  • No effort to rewrite the target weight of all individual components when changing silage pits with a different nutrition value or varying herd size
  • No need to purchase a feeder wagon scale
  • Fast filling of target weight in the bucket without interrupting to verify the current weight
  • Less risk of loss of expensive commodities caused by the wind blowing over wagon
    Automatic bale counter versus paper notes in the cab
  • Can weigh liquids and even partial loads on pallets or in containers and buckets
  • Avoid spilling goods or transport multiple bales without dropping them with the LTH feature

The camera is factory-installed in the loader factory; the wiring harness is protected inside the boom. The camera angle can be adjusted if needed. It is possible that a different position of the camera is desired, such as showing the contents of a bucket or the side of a snow blade. For such unique desires, spare cable length is available to enable customized camera positions.

 

Benefits

  • Fast connection of attachments
  • No damage to pallets and goods loaded on forks and spears
  • Possibility for customized camera position

Single-point hydraulic connection on the 600R Loader Single-point hydraulic connection on the 600R Loader
#

The R-Series Loaders feature a single-point hydraulic connection that saves the operator time when attaching or detaching the loader. This feature also incorporates the connection point for any electrical needs as well as the hydraulic lockout valve. With all hydraulic and electrical connections in one location, installation is quickly completed with the pull of a handle.

 

NOTE: Before disconnecting the hydraulic connection between the loader and the tractor, it is necessary to release the hydraulic pressure.

Single-point hydraulic connection (open) Single-point hydraulic connection (open)
Single-point hydraulic connection (closed) Single-point hydraulic connection (closed)

R-Series Loader attach and detach instruction video


600R Loader working with 6120M Tractor 600R Loader working with 6120M Tractor
#

The MSL R-Series Loaders utilize a false rod cylinder to improve bucket performance. This bucket cylinder is designed with a smaller displacement of oil required on the head end of the cylinder, which allows the cylinder to function more quickly, decreasing operation cycle time. With the false rod cylinder design, loader applications can work more quickly and efficiently.

False rod cylinders on 600R Loader False rod cylinders on 600R Loader

New Mast Latch System for the 5R and 6R series loaders makes it easy to attach and detach the loader from the tractor. The system provides easy visual references from both the inside and outside of tractor cab. This feature provides a large pin that is inserted through the mast just above the latching mechanism, providing a quick visual reference from the operator station and during walk around inspections. This pin is attached to the loader with a cable with a convenient storage bracket when the loader is removed. When the loader is attached, the pin provides a sliding handle to assist with alignment and keeping the loader securely attached.

Mast Latch System pin installed in locked position Mast Latch System pin installed in locked position
Mast Latch System pin in stored position Mast Latch System pin in stored position

The inside of the loader mast has a new sticker that is easy to see from cab. This offers an indicator for when latched, to rest over the checkmark and provides a lock symbol just above the pin protrusion. The Mast Latch System is a pin and mechanical lever that allows operators to remove or attach the loader with one trip out of the cab.

Inside of mast shown from operator station Inside of mast shown from operator station

https://johndeeredealers.hosted.panopto.com/Panopto/Pages/Sessions/List.aspx?folderID=cb4ec13e-373e-49ba-84e6-af970138c479


Specs
Key Specs
Maximum lift height (A) 4495 mm
177 in.
Loader
Lift capacity at full height Measured at pivot (U)
2301 kg
5073 lb
Measured at 800 mm ahead of pivot (V)
2301 kg
5073 lb
Boom breakout force Measured at pivot (Y)
3235 kgf
7132 lbf
Measured at 800 mm ahead of pivot (Z)
2822 kgf
6221 lbf
Bucket rollback force capacity At maximum height (VV)
2916 kgf
6429 lbf
At 59-in. (1500-mm) lift height (XX)
4587 kgf
10113 lbf
At ground-level line (ZZ)
4492 kgf
9903 lbf
Key Specs
Clearance at full height - bucket dumped (C) 3481 mm
137 in.
Dump angle, degrees (E) 60 degree (angle)
Rollback angle, degrees (G) 48 degree (angle)
Tractor
Model 6145R/M, 6155R/M
Front tire 540/65R30
Rear tire 650/65R42
Front axle configuration MFWD
Wheelbase 2765 mm
108.9 in.
Pump capacity 114 L/min
30.1 gpm
Rated pressure 200 bar
2900 psi
Loader
Base weight 1674.3 kg
Leveling configuration Mechanical Self Leveling (MSL)
Bucket used Heavy-duty grapple 2450 mm
Heavy-duty grapple 96 in.
Bucket weight 375 kg
826 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
2814 kg
6204 lb
Measured at 800 mm ahead of pivot (X)
2645 kg
5831 lb
Dimensions Maximum lift height (A)
4495 mm
177 in.
At full height - bucket level(B)
4255 mm
168 in.
At full height - bucket dumped (C)
3481 mm
137 in.
Overall length (I+F), ft (m) 5.6 m
18.4 ft
Digging depth (H) 81 mm
3 in.
Reach At maximum height (D)
1038 mm
41 in.
At ground level - bucket level (F)
2848 mm
112 in.
Bucket angle Dump angle, degrees (E)
60 degree (angle)
Rollback angle, degrees (G)
48 degree (angle)
Dump angle, ground
118 degree (angle)
Cycle times Loader raise, seconds
3.91 seconds
Loader lower, seconds
2.7 seconds
Bucket dump, seconds
1.81 seconds
Bucket rollback, seconds
1.81 seconds
Accessories and Attachments
Buckets

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.


Materials bucketMaterials bucket
#

Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose task

 

NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.


Heavy-duty bucket (shown with grapple)Heavy-duty bucket (shown with grapple)
#

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.


Heavy-duty bucket (shown with grapple)Heavy-duty bucket (shown with grapple)
#

Cutting Edges
Replaceable wear edgeReplaceable wear edge
#

For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:

  • 1850-mm (73-in.) width replaceable cutting edge
  • 2150-mm (85-in.) width replaceable cutting edge
  • 2450-mm (96-in.) width replaceable cutting edge
  • 2750-mm (108-in.) width replaceable cutting edge

Replaceable wear edgeReplaceable wear edge
#

For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:

  • 1850-mm (73-in.) width replaceable cutting edge
  • 2150-mm (85-in.) width replaceable cutting edge
  • 2450-mm (96-in.) width replaceable cutting edge
  • 2750-mm (108-in.) width replaceable cutting edge

Hydraulic Controls

Single Lever Control and Mounting Parts (3 Function with GSS) - BW15785


Single Lever Control and Mounting Parts (2 or 3 Function) - BW15744


Mid-Mounted Independent Control Valve (3 Function) - BW15986


Mid-Mounted Independent Control Valve (2 Function) - BW15985


Miscellaneous

Power Beyond Spacer - BW15989


Two-button activation for hydraulic remote implement latch Two-button activation for hydraulic remote implement latch
#

The hydraulic remote implement latch allows implements to be changed quickly and efficiently.  An operator can activate the device from the cab by simultaneously pressing the two buttons installed on the right-hand side of the operator’s station. Switching from one attachment to the next can now be accomplished quickly with limited movements of the loader and without leaving the operator’s seat.

 

The hydraulic remote implement latch is powered by a hydraulic accumulator, which collects and stores excess oil generated through the normal operation of the boom (curl, dump, lift, lower). To activate the device, the two switches installed in the right-hand side of the operator’s station are pressed simultaneously by the operator. This action releases the oil, and unlocks the implement.

 

This feature does not require a third-function hydraulic system.


Digging teeth can be added to the heavy-duty bucket for easier digging in hard ground or for breaking loose hard-packed materials such as manure or silage. Digging teeth are not compatible with replaceable cutting edges.


The loader hoses are connected to the mid-tractor selective control valves (SCVs).


Hoses and Parts (3 Function) - BW16858


Hoses and Parts (3 Function) - BW16856


The loader hoses are connected to the mid-tractor selective control valves (SCVs).


The loader hoses are connected to the mid-tractor selective control valves (SCVs).


3 Function Single Point Hydraulic Connection, Loader Half - BXX10013


Single-point hydraulic connection on the 600R Loader Single-point hydraulic connection on the 600R Loader
#

The R-Series Loaders feature a single-point hydraulic connection that saves the operator time when attaching or detaching the loader. This feature also incorporates the connection point for any electrical needs as well as the hydraulic lockout valve. With all hydraulic and electrical connections in one location, installation is quickly completed with the pull of a handle.

 

NOTE: Before disconnecting the hydraulic connection between the loader and the tractor, it is necessary to release the hydraulic pressure.


2-Function, Single Point Coupler, Loader Half, Loader Ready - BXX10014


Single-point hydraulic connection on the 600R Loader Single-point hydraulic connection on the 600R Loader
#

The R-Series Loaders feature a single-point hydraulic connection that saves the operator time when attaching or detaching the loader. This feature also incorporates the connection point for any electrical needs as well as the hydraulic lockout valve. With all hydraulic and electrical connections in one location, installation is quickly completed with the pull of a handle.

 

NOTE: Before disconnecting the hydraulic connection between the loader and the tractor, it is necessary to release the hydraulic pressure.


*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.

Submitting Form...
Submitting Form...


Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Homestead

127 N Krome Ave
Florida City, FL 33034
305-247-9886

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2024 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group