Maximum lift height (A) | 2160 mm / 85 in. |
Clearance at full height - bucket dumped (C) | 1667 mm / 66 in. |
Dump angle, degrees (E) | 36 degree (angle) |
Rollback angle, degrees (G) | 34 degree (angle) |
*Inventory shortages may cause extended delivery dates
*This price does not include attachments and accesories
Maximum lift height (A) | 2160 mm / 85 in. |
Clearance at full height - bucket dumped (C) | 1667 mm / 66 in. |
Dump angle, degrees (E) | 36 degree (angle) |
Rollback angle, degrees (G) | 34 degree (angle) |
*Inventory shortages may cause extended delivery dates
*This price does not include attachments and accesories
The pivot pins are made with a unique offset head design to eliminate cross-pins and cotter pins to retain the pin. Instead, the pin is held in place with a nut, which is very simple to install as it eliminates any alignment issues. The offset head of the pin prevents rotation of the pin and reduces pin wear.
A lubrication groove in the cylinder pin provides a path for grease to ensure proper lubrication of the cylinder pin and long life.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
The 220R loader is designed to easily attach to and detach from the tractor without tools.
The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.
The Quik-Change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground.
This CUT Carrier is base equipment on the 120E and 120R loaders.
To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier.
Then install the retaining pins and the carrier is ready to work.
This provides a very effective means of changing attachments without having to purchase an option to facilitate changing attachments.
Whether the operator is new or experienced to loader operations, it requires skill to maintain an even load and reduce the amount of material lost. With the MSL loader offering for 1 Family, 2 Family, 3D, and 3E Tractors, anyone can operate their loader with ease and confidence. With the MSL loader, you will notice:
This loader is the first of its kind in North America for Compact Utility Tractors and can make any loader task easier and quicker to accomplish.
Tractor | |
Model | 2032R, 2038R |
Front tire | 23x8.50-14 4PR R4 |
Rear tire | 14-17.5 6PR R4 |
Wheelbase | 1725 mm 68 in. |
Pump capacity | 20.2 L/min 5.3 gpm |
Rated pressure | 17.23 MPa 2499 psi |
Loader | |
Leveling configuration | Non-Self Leveling |
Bucket used | 1450 mm 57 in. |
Bucket weight | 88 kg 194 lb |
Lift capacity at full height | Measured at pivot 509 kg 1120 lb Measured at 500 mm ahead of pivot 365 kg 803 lb |
Lift capacity at 59 in. (1500 mm) | Measured at pivot 589 kg 1296 lb Measured at 500 mm ahead of pivot 445 kg 979 lb |
Boom breakout force | Measured at pivot 886 kgf 1949 lbf Measured at 500 mm ahead of pivot 618 kgf 1360 lbf |
Bucket rollback force capacity | At maximum height 1044 kgf 2297 lbf At 59-in. (1500-mm) lift height 1302 kgf 2864 lbf At ground-level line 972 kgf 2138 lbf |
Dimensions | Maximum lift height 2160 mm 85 in. At full height - bucket level 1999 mm 79 in. At full height - bucket dumped 1667 mm 66 in. |
Overall length (I+F), ft (m) | 3076 mm 121 in. |
Digging depth (H) | 149 mm 6 in. |
Reach | At maximum height 756 mm 30 in. At ground level - bucket level 1351 mm 51 in. |
Bucket angle | Dump angle, degrees 36 degree (angle) Rollback angle, degrees 34 degree (angle) Dump angle, ground 115 degree (angle) |
Cycle times | Loader raise, seconds 3.19 seconds Loader lower, seconds 1.94 seconds Bucket dump, seconds 4.76 seconds Bucket rollback, seconds 2.91 seconds |
Key Specs | |
Maximum lift height (A) | 2160 mm 85 in. |
Clearance at full height - bucket dumped (C) | 1667 mm 66 in. |
Dump angle, degrees (E) | 36 degree (angle) |
Rollback angle, degrees (G) | 34 degree (angle) |
Loader | |
Base weight | 330.9 kg 729 lb |
Key Specs | |
Maximum lift height | 2160 mm 85 in. |
Clearance at full height - bucket dumped | 1667 mm 66 in. |
Dump angle, degrees | 36 degree (angle) |
Rollback angle, degrees | 34 degree (angle) |
Loader | |
Overall length | 3076 mm 121 in. |
Digging depth | 149 mm 6 in. |
The ballast box can be used to carry additional ballast for greater tractor stability.
A 9-in. high extension can be added to ballast box for even greater capacity.
A bushing kit is required for the ballast box to be used with the iMatch™ Quick Hitch.
The ballast box can be used to carry additional ballast for greater tractor stability.
A 9-in. high extension can be added to ballast box for even greater capacity.
A bushing kit is required for the ballast box to be used with the iMatch™ Quick Hitch.
Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks. The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.
There is a quik-change connection for easy on/off.
The round-back design helps material flow when filling or dumping the bucket.
The 1250-mm (49.2-in.) bucket is standard on the 120R Loader for field-installed orders.
For loaders installed out of Augusta, GA on tractors, the base bucket will be the 1350-mm (53-in.) bucket.
It is also compatible with the 220R Loader, as the carrier assembly is the same (but may not cover the width of the model year 2017 2R Series Tractor).
When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.
When the 220R Loader ordered field installed (palletized), the loader ships from Augusta, GA.
For non-model year 2017 2R Tractors, the bucket and other specific configuration items will need to be ordered through Parts (such as mounting frames, and hood guard).
Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks. The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.
There is a quik-change connection for easy on/off.
When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.
For non-model year 2017 2R Tractors, the bucket and other specific configuration items will need to be ordered through Parts (such as mounting frames, and hood guard).
Part of the bucket lineup for the 220R Loader is the 1450-mm (57-in.) heavy-duty bucket with loops.
For those conditions where a heavier, more durable bucket is needed, this bucket fits the demand.
Constructed with more material for additional strength to handle the toughest task and includes two loops on the top plate.
When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.
When the 220R Loader ordered field installed (palletized), the loader ships from Augusta, GA.
For non-model year 2017 2R Tractors, the bucket and other specific configuration parts will need to be ordered through Parts (such as mounting frames, and hood guard).
Bucket specs:
Carrier | Compact loader carrier |
Type | Heavy-duty with loops |
Width | 1450 mm (57 in.) |
Weight | 97.4 kg (214.7 lb) |
Height | 513 mm (20.2 in.) |
Depth | 588.2 mm (23.1 in.) |
Struck capacity | 0.25 m3 (9.0 cu ft) |
Heaped capacity | 0.29 m3 (10.4 cu ft) |
Compare bucket specs for compact utility tractor loaders
Part of the bucket lineup for the 220R is the 1450-mm (57-in.) standard-duty bucket.
This wider bucket is base equipment on the 220R for model year 2017 2032R, 2038R (and EU 2036R).
Bucket specs:
Carrier | Compact loader carrier |
Type | Materials |
Width | 1450 mm (57 in.) |
Weight | 87.9 kg (193.7 lb) |
Height | 513 mm (20.2 in.) |
Depth | 587.9 mm (23.1 in.) |
Struck capacity | 0.25 m3 (9.0 cu ft) |
Heaped capacity | 0.284 m3 (10 cu ft) |
Compare bucket specs for compact utility tractor loaders
Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.
IMPORTANT: Materials buckets are not recommended for heavy-duty tasks. For heavier use applications, use heavy-duty bucket.
The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.
There is a quik-change connection for easy on and off.
The round-back design helps material flow when filling or dumping the bucket.
The quik-change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground. To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier. Then install the retaining pins and the carrier is ready to work.
This provides a very effective means of changing attachments without having to purchase an option to facilitate changing attachments.
The hood guard protects the front of the tractor and wraps around the hood for extra added protection. It is a bolt-on design that stays with the tractor when the loader is removed. The hood guard is fixed and provides full access to the tractor for regular service.
When ordering a 220R Loader for model year 2017 (and newer) 2R Tractors, and selecting factory-install option, the hood guard is included. When ordering the 220R Loader field installed for model year 2017 (and newer), the hood guard will be part of the palletized loader package.
Mounting frames are available for 2R Series Tractors.
Mounting frames are available for 2R Series Tractors.
Mounting frames are available for 2R Series Tractors.
Mounting frames are available for 2R Series Tractors.