The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
The 220R Loader is designed for easy removal/mounting to/from the tractor without tools.
The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.
To view a video of how the Quik-Park system works, click here.
NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.
|Leveling configuration||Non-Self Leveling|
|Bucket used||1450 mm
|Bucket weight||88 kg
|Lift capacity at full height||Measured at pivot (U)
Measured at 500 mm ahead of pivot (V)
|Lift capacity at 59 in. (1500 mm)||Measured at pivot (W)
Measured at 500 mm ahead of pivot (X)
|Boom breakout force||Measured at pivot (Y)
Measured at 500 mm ahead of pivot (Z)
|Bucket rollback force capacity||At maximum height (VV)
At 59-in. (1500-mm) lift height (XX)
At ground-level line (ZZ)
|Dimensions||Maximum lift height (A)
At full height - bucket level(B)
At full height - bucket dumped (C)
|Overall length (I+F), ft (m)||3076 mm
|Digging depth (H)||149 mm
|Reach||At maximum height (D)
At ground level - bucket level (F)
|Bucket angle||Dump angle, degrees (E)
36 degree (angle)
Rollback angle, degrees (G)
34 degree (angle)
Dump angle, ground
115 degree (angle)
|Cycle times||Loader raise, seconds
Loader lower, seconds
Bucket dump, seconds
Bucket rollback, seconds
|Front tire||23x8.50-14 4PR R4|
|Rear tire||14-17.5 6PR R4|
|Pump capacity||20.2 L/min
|Rated pressure||17.23 MPa