John Deere 120R

Feature Overview
John Deere 120R
  • Compatible with the 1023E, 1025R and 2025R tractors
  • Quik-Park stands for easy attachment and removal
  • up to 553 lb (251 kg) lift capacity
  • Mechanical Self-Leveling (MSL) Loader option with up to 726 lb (330 kg) lift capacity
Maximum lift height (A) 1828 mm / 72 in.
Clearance at full height - bucket dumped (C) 1304 mm / 51.3 in.
Dump angle, degrees (E) -40.5 degree (angle)
Rollback angle, degrees (G) 30.08 degree (angle)
Feature Overview
John Deere 120R
  • Compatible with the 1023E, 1025R and 2025R tractors
  • Quik-Park stands for easy attachment and removal
  • up to 553 lb (251 kg) lift capacity
  • Mechanical Self-Leveling (MSL) Loader option with up to 726 lb (330 kg) lift capacity
Maximum lift height (A) 1828 mm / 72 in.
Clearance at full height - bucket dumped (C) 1304 mm / 51.3 in.
Dump angle, degrees (E) -40.5 degree (angle)
Rollback angle, degrees (G) 30.08 degree (angle)
We are here to help
Features

Easily remove and mount loader to and from the tractor without tools

Quik-Park© loader mounting system Quik-Park© loader mounting system
#

The Quik-Park mounting system on the 120R Loader is designed for easy removal and mounting to and from the tractor without tools.

 

Just like on the former H120, the parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.

Mount to and from the tractor without tools Mount to and from the tractor without tools
D120
Parking stands stored in the D120 torque tube Parking stands stored in the D120 torque tube

The D120 does not utilize the Quik-Park system as used on the 120R, but rather has two parking stands that are stored within the torque tube for a manual parking process.

 

Remove the parking stand from the torque tube area and place within the loader foot plate during the parking process (as shown).

Once the loader weight is being supported by the bucket and parking stands, manually remove the pins from the mast assembly and disconnect hydraulics.

Remove the parking pins Remove the parking pins
Back away from the loader Back away from the loader

 After installing the parking stands, removing the parking pins and disconnecting hydraulics, simply back away.

D120 Loader on the parking stands D120 Loader on the parking stands

Pivot pin Pivot pin
Pivot pins shown on the 120R Loader Pivot pins shown on the 120R Loader

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.

 

A nut ensures the pins remain in position.

 

A lubrication groove provides a path for lubrication.

 

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.


Whether the operator is new or experienced to loader operations, it requires skill to maintain an even load and reduce the amount of material lost. With the MSL loader offering for 1 Family, 2 Family, 3D, and 3E Tractors, anyone can operate their loader with ease and confidence.  With the MSL loader, you will notice:

  • Loader implement will maintain position wherever the loader is lifted to
  • Increased lift capacities
  • Reduction of material lost during operation
  • Easy visibility of the bucket level indicator on the right-hand side of the loader boom to help determine the position of the front implement

 

This loader is the first of its kind in North America for Compact Utility Tractors and can make any loader task easier and quicker to accomplish.

Studio rendering of 1R Tractor with 120R MSL Loader Studio rendering of 1R Tractor with 120R MSL Loader
Pallet fork usage rendering of 1R Tractor with 120R MSL Loader Pallet fork usage rendering of 1R Tractor with 120R MSL Loader

Specs
Key Specs
Maximum lift height (A) 1828 mm
72 in.
Clearance at full height - bucket dumped (C) 1304 mm
51.3 in.
Dump angle, degrees (E) -40.5 degree (angle)
Rollback angle, degrees (G) 30.08 degree (angle)
Loader
Lift capacity at full height Measured at pivot (U)
364 kg
803 lb
Measured at 500 mm ahead of pivot (V)
251 kg
553 lb
Boom breakout force Measured at pivot (Y)
890 kgf
1963 lbf
Measured at 500 mm ahead of pivot (Z)
606 kgf
1335 lbf
Bucket rollback force capacity At maximum height (VV)
648 kgf
1428 lbf
At 59-in. (1500-mm) lift height (XX)
777 kgf
1713 lbf
At ground-level line (ZZ)
753 kgf
1659 lbf
Base weight 283.88 kg
Bucket used Materials 1350 mm
Bucket weight 83 kg
183 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
434 kg
957 lb
Measured at 500 mm ahead of pivot (X)
312 kg
688 lb
Dimensions Maximum lift height (A)
1828 mm
72 in.
At full height - bucket level(B)
1666 mm
65.6 in.
At full height - bucket dumped (C)
1304 mm
51.3 in.
Overall length (I+F), ft (m) 2888 mm
113.7 in.
Digging depth (H) -86 mm
-3.4 in.
Reach At maximum height (D)
698 mm
27.5 in.
At ground level - bucket level (F)
1288 mm
50.7 in.
Bucket angle Dump angle, degrees (E)
-40.5 degree (angle)
Rollback angle, degrees (G)
30.08 degree (angle)
Dump angle, ground
-115.4 degree (angle)
Cycle times Loader raise, seconds
3.7 seconds
Loader lower, seconds
2.6 seconds
Bucket dump, seconds
4.1 seconds
Bucket rollback, seconds
2.5 seconds
Tractor
Model 2025R/2026R
Front tire 23x8.50-12 6PR R4 CL
Rear tire 12.00-16.5 6PR R4 CL
Wheelbase 1600 mm
Pump capacity 26.5 L/min
Rated pressure 2146 psi
Accessories and Attachments
Ballast
Ballast box Ballast box
Ballast box with 3E Tractor Ballast box with 3E Tractor

A ballast box can be used to carry additional ballast for greater tractor stability.

 

A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

 

 
Ballast box extension 

 

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch.

 

A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.


Ballast box with extension Ballast box with extension

The ballast box can be used to carry additional ballast for greater tractor stability. A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

 

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch. A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.

 

The ballast box extension is only available through Parts; it is not a factory option.


Buckets
Materials bucketMaterials bucket

Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks. The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

 

There is a quik-change connection for easy on/off. 

 

The round-back design helps material flow when filling or dumping the bucket.

 

The 1250-mm (49.2-in.) bucket is standard on the 120R Loader for field-installed orders.

 

For loaders installed out of Augusta, GA on tractors, the base bucket will be the 1350-mm (53-in.) bucket. 

 

It is also compatible with the 220R Loader, as the carrier assembly is the same (but may not cover the width of the model year 2017 2R Series Tractor). 

 

When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.

 

When the 220R Loader ordered field installed (palletized), the loader ships from Augusta, GA.

 

For non-model year 2017 2R Tractors, the bucket and other specific configuration items will need to be ordered through Parts (such as mounting frames, and hood guard).


Materials bucketMaterials bucket

Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks. The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

 

There is a quik-change connection for easy on/off.

 

When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.

 

For non-model year 2017 2R Tractors, the bucket and other specific configuration items will need to be ordered through Parts (such as mounting frames, and hood guard).


Hood Guards
Deluxe hood guard shown on H120 LoaderDeluxe hood guard shown on H120 Loader

The deluxe hood guard protects the front of the tractor while wrapping around the hood for extra added protection. The bolt-on design stays with the tractor when the loader is removed.

 

The hood guard is fixed and provides full tractor access for regular service.

 

Standard on 120R Loaders, the hood guard can be ordered for a tractor without ordering a loader.

 

The deluxe hood guard is the same for both the D120 and 120R Loaders; however, it is only available as field-installed option for the D120 Loaders.


Hood guard shown on D120 LoaderHood guard shown on D120 Loader
#

 

The hood guard protects the front of the tractor while operating the loader.

The bolt-on design stays with the tractor when the loader is removed.

The hood guard is fixed and provides full tractor access for regular service.

Standard on D120 Loaders, the hood guard can be ordered for a tractor without ordering a loader.


Miscellaneous

Anti -Drop Valve Kit - Bucket Circuit - BW16050


Anti -Drop Valve Kit - Lift Circuit - BW16049


Hoses and Clamp - BW16182


Mounting Frame - BW15898


Miscellaneous (Australia Only)

Anti Spill Kit - BXX10016


Service Locks - BXX10004


Mounting Frames

Mounting Frame - ALD10025


Mounting Frame - ALD10023


*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group