John Deere 9009A TerrainCut™

DEBUG Ind: Golf And Sports Turf, Cat: Mowers, SubCat: Rough Trim Surround Mowers, SubSubCat: 9009a Terraincut Mower
Feature Overview
John Deere 9009A TerrainCut™
  • Five, 27-in. independent rotary decks with a 9-foot cutting width
  • Deep shell deck design with exclusive rear discharge chute
  • No-tool notch system for easy height-of-cut adjustments
  • LoadMatch™ for excellent climbing and cut quality
Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW / At 2800 rpm ISOC: 55.1 hp
Mowing speed 0 - 12.8 km/h / 0 - 8 mph
Cutting unit size 68.58 cm / 27 in.
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Feature Overview
John Deere 9009A TerrainCut™
  • Five, 27-in. independent rotary decks with a 9-foot cutting width
  • Deep shell deck design with exclusive rear discharge chute
  • No-tool notch system for easy height-of-cut adjustments
  • LoadMatch™ for excellent climbing and cut quality
Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW / At 2800 rpm ISOC: 55.1 hp
Mowing speed 0 - 12.8 km/h / 0 - 8 mph
Cutting unit size 68.58 cm / 27 in.
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Features

Rear-discharge design provides premium cut quality and dispersal for less clumping and blowing for clean up

27-in. (68.6-cm) deck and frame27-in. (68.6-cm) deck and frame
Asymmetric rear dischargeAsymmetric rear discharge

The 9009A and 7400A TerrainCut™ Mowers 27-in. (68.6-cm) deck features a deck design with an asymmetric rear discharge cutout and molded chute to promote better airflow, leading to improved clipping dispersal and cut quality.

 

The unique shape of the deck shell cutout includes a heavily rounded opening on one side that gradually transitions to a larger opening on the other side of the cutout, allowing the grass to exit the deck evenly while significantly reducing the possibility of the deck congestion. This design incorporates deck structure along the bottom of the discharge area that reduces sound power, does not affect cut quality negatively, and acts as a foot guard eliminating the need for an external guard that can lead to external grass build up which can be dropped in the mowing pass over time.

 

When the asymmetric deck shell discharge shape is used in combination with the asymmetric discharge chute, this deck outperforms the competition in cut quality by minimizing clumping with smooth transitions and guiding the discharge material in a more dispersed pattern.

 

The improved dispersal will lead to less clean up and blowing, allowing machines to mow earlier in the day while saving time and reducing labor.

 

The proper blade selection for heights of grass, grass type, and sharp blades are keys to improved cut quality and dispersal. The removal of no more than one third of the grass blade is recommended. During heavy growth times it may require changing blades, mowing more often or raising the height of cut to improve clipping dispersal.


9009A TerrainCut© Rough Mower 9009A TerrainCut© Rough Mower
7400A TerrainCut Trim and Surrounds Mower 7400A TerrainCut Trim and Surrounds Mower

The 9009A TerrainCut Rough Mower is equipped with five and the 7400A TerrainCut Trim and Surrounds mower is equipped with three 68.6-cm (27-in.) stamped rotary decks for superior productivity and strength. The rotary decks perform exceptionally well across a wide range of grass types, including warm- and cool-season grasses.

Stamped deck shell Stamped deck shell

A strong stamped, 10-gauge shell construction is an integral part of this durable deck. The stamped design uses a single piece of steel to form the shell that provides consistent strength throughout all areas of the deck. This is the starting point of the strength and durability of the deck construction.

Frame support and protection Frame support and protection

Surrounding the deck is a tough, steel frame designed to protect the deck shell. It all starts with the frame on top of the deck which is then bolted to the shell providing extra protection. The front and rear roller brackets are attached to the framework, so as the front and rear rollers encounter obstacles, the force is transferred through the frame rather than through the deck shell. This design also decreases the distance from the blade tip to outside edge of the deck for closer trimming around objects like trees and fences.

Angled skid plate Angled skid plate

An angled skid plate between the front roller and deck shell helps protect the front lip of the deck from tough terrain such as tree roots or other objects. The skid plate helps move the deck over the object to prevent the front edge from contacting and damaging the deck shell. The side of the deck also has additional protection to increase durability with a 38-mm (1.5-in.) tall and 12.7-mm (0.5-in.) thick steel stock welded to the decks edge.

 

Roller brackets are cast steel with extended housings to effectively protect the roller bearings from a wide range of debris types. The large front rollers are greaseable to help purge water and debris and use snap rings to ensure bearings stay in place, increasing durability and longevity of the front rollers.


LoadMatch setting LoadMatch setting

LoadMatch is an electronic setting through the TechControl display that allows managers more control of the machine and how it is operated when out on the course.

 

Most operators will mow as fast as the mow setting will allow, keeping their traction pedal all the way down. However, in some conditions this can lead to poor cut quality.

 

One example is getting behind in mowing due to weather conditions. The grass is long and lush and to properly cut that amount of grass at one time, the operator should slow the traction speed. This allows the cutting units to maintain proper turning speed, process the grass, and properly cut in one pass. Not slowing down causes missed grass and an uneven appearance. This affects the after-cut appearance and also reduces productivity by having to mow a second time to properly cut the lush grass.

 

The LoadMatch feature compensates the traction speed of machine to keep power to the cutting units. In the long, lush conditions described above with LoadMatch engaged, the operator would still have the traction pedal all the way down, but the machine would sense the load and slow the traction speed to properly cut the mowing pass. Once the load is reduced, the machine will return to the normal mow speed.

 

LoadMatch puts the manager in control of cut quality instead of the operator.


AutoPedal AutoPedal
#

The AutoPedal feature controls engine rpm and transport speed of the machine through the eHydro© foot pedal controls. AutoPedal is similar to an automobile gas pedal operation; the more the forward pedal is pressed, the faster the machine moves and the higher the engine rpm; pressing the pedal less, the slower the machine moves and the lower the engine rpm.

 

On conventional machines, the engine rpm is controlled by the operator by means of a manual or electric/manual throttle. Operators are trained to always operate the engine at wide-open throttle. Running at wide open throttle means running the engine at its fastest speed, which increases the sound levels and fuel usage.

 

The AutoPedal system allows the engine to only run as fast as needed, meaning that as operators transport around the course, the engine speed is only as fast as needed for the transport speed. If the operator approaches play and stops, the engine rpm goes to idle. This makes transporting quieter and since the engine does not run full speed all the time, it reduces fuel consumption.

 

Once the operator reaches the mowing site, engages the mow switch on the CommandARM© controls, the engine rpm automatically increases to full throttle for mowing.


Large wheel motors Large wheel motors
eHydro traction pump eHydro traction pump

The 9009A TerrainCut and the 8900A PrecisionCut utilizes the same eHydro traction pump and wheel motors in the A-model take performance, traction, and operation to the next level. This is combined with the standard GRIP system that reduces wheel slip by sending flow from the front wheel to the opposite rear wheel.

 

The system is designed to take on the most challenging course conditions ideal for undulating terrain, providing superior performance and traction out on the course.

 

The traction system in the A-models is driven by a servo-controlled hydrostatic pump. The control of the pump is no longer mechanical linkages, but instead it is electronic. The design reduced the complexity of the drive system meaning no more linkages to adjust or repair decreased routine maintenance and providing reliable day-in/day-out operation.

 

The end result is more options for mowing different terrain then just straight up and down. The standard GRIP system ensures that when mowing slopes on an angle the high side tire maintains tractions unlike like mechanical systems used on other rough mowers. This increases productivity in tight areas and reduces damage to turf from wheel slippage.

Forward/reverse pedals Forward/reverse pedals
#

The operator will benefit from eHydro, too. The pedal effort has been reduced, reducing the foot fatigue during many hours of mowing.


GRIP all-wheel drive traction valve and rear motors GRIP all-wheel drive traction valve and rear motors

For superior traction with a true hydraulic four-wheel drive (4WD), the GRIP all-wheel drive traction system is standard equipment on the 8800A and 9009A TerrainCut© Rough Mowers. This system reduces wheel slip by sending flow from the front wheel to the opposite rear wheel.

 

For example, if the front-right wheel starts to slip, hydraulic flow is diverted to the left-rear wheel to maintain positive traction. By allowing the flow to cross over to the opposite rear wheel, the system maintains traction not only while climbing straight up hills, but also on side-hills.

 

The GRIP all-wheel drive traction system is always engaged when driving forward with the 8800A and 9009A TerrainCut Rough Mowers. There are no electronics to engage the 4WD system, simplifying the electrical system and the design of the valve at the rear of the machine.

 

In reverse, a standard switch is provided that disengages 4WD. The switch senses the reverse pedal has been depressed and shuts off flow to the rear drive wheels. This ensures the front drive tires are doing the work in reverse rather than the rear tires, minimizing wheel slip and scuffing of turf when backing up an incline.

 

The end result is more options for mowing different terrain than just straight up and down. The GRIP system ensures that when mowing slopes on an angle, the high side tire maintains tractions unlike like mechanical systems used on other rough mowers. This increases productivity in tight areas and reduces damage to turf from wheel slippage.


Deck HOC system Deck HOC system

One common element among John Deere golf mowing products, reel or rotary, is that adjustments are quick and easy. The 9009A and 7400A TerrainCut© Mowers are no different. All HOC adjustments can be performed without tools with an innovative notch system, similar to what is included on the Quick-Adjust 5 and Quick-Adjust 7 reel cutting units.

 

To adjust the HOC on the 9009A and 7400A TerrainCut, pull the levers at each end of the front and rear rollers outward. With the levers pulled out, give a quick tug to disengage the teeth in the notches. This allows the rollers to rotate upward and downward freely and easily.

Inside HOC indicator Inside HOC indicator
Outside HOC indicator Outside HOC indicator

Locate the HOC indicator on the inside of the adjuster arm and line up the tabs or use the top edge of the adjuster arm to line up the height on the gauge located on the outside. Re-engage the notches by rotating the levers back inward to lock the HOC into place. No tools are needed to complete the adjustment.

 

The adjustments must be performed on both the front and rear roller, and both rollers have the same adjustment process. A HOC label is also located on the rear of the deck to serve as a guide for setting the height of cut.

 

The HOC is adjustable 1.9 cm (3/4 in.) to 10.2 cm (4 in.), in 0.64-cm (1/4-in.) increments.

 

The HOC system has been redesigned from prior models to include a longer and stronger handle. Hardened notch material is used to improve durability and resistance to rust and debris.


Steering cylinder and linkage system Steering cylinder and linkage system

The 8800A and 9009A TerrainCut© Rough Mower puts stripes on the roughs as straight as they are on the greens. Utilizing the same style steering cylinder as found on the 2500B PrecisionCut© Mower, 2500E E-Cut© Hybrid Riding Greens Mowers, PrecisionCut and E-Cut©Hybrid Fairway Mowers, the 8800A and 9009A TerrainCut Rough Mowers can mow the straightest lines of any rough mower in the industry today.

 

Traditional hydraulic cylinders have a rod on only one side of the cylinder. The cylinder on the 8800A and 9009A TerrainCut Rough Mower has one rod that goes through both sides of the cylinder. This equalizes volume and pressure on both sides of the cylinder packing, helping the operator make perfectly straight lines with little effort.

 

This system also equalizes the steering effort, meaning easy turns whether turning to the right or to the left.

 

The steering system is all about proven technology, not only with the cylinder itself, but also with the linkage system connecting the cylinder to the steering tires. The linkage system on the 8800A and 9009A TerrainCut Rough Mower has been used in John Deere Golf since 2008 and is common with the popular 5000 Series John Deere Utility Tractors, which already had proven reliability and durability with operators worldwide.


Front tires Front tires
Strong lightweight frame design Strong lightweight frame design

The 9009A TerrainCut© Rough Mower is the lowest weight at 27 in five-gang rough mower on the market. The lower weight helps reduce the overall foot print in fine turf conditions reducing compaction and turf stress. Along with the lower weight, the 9009A features 26.5 x12-12 turf tires for low footprint and maximum traction in the toughest conditions. This combination provides a strong traction package with low levels of ground compaction.


68.6-cm (27-in.) deck and frame 68.6-cm (27-in.) deck and frame
Asymmetric rear discharge Asymmetric rear discharge

The 9009A and 7400A TerrainCut© Mowers 68.6-cm (27-in.) deck features a deck design with an asymmetric rear discharge cutout and molded chute to promote better airflow, leading to improved clipping dispersal and cut quality.

 

The unique shape of the deck shell cutout includes a heavily rounded opening on one side that gradually transitions to a larger opening on the other side of the cutout, allowing the grass to exit the deck evenly while significantly reducing the possibility of the deck congestion. This design incorporates deck structure along the bottom of the discharge area that reduces sound power, does not affect cut quality negatively, and acts as a foot guard eliminating the need for an external guard that can lead to external grass build up which can be dropped in the mowing pass over time.

 

When the asymmetric deck shell discharge shape is used in combination with the asymmetric discharge chute, this deck outperforms the competition in cut quality by minimizing clumping with smooth transitions and guiding the discharge material in a more dispersed pattern.

 

The improved dispersal will lead to less clean up and blowing, allowing machines to mow earlier in the day while saving time and reducing labor.

 

The proper blade selection for heights of grass, grass type, and sharp blades are keys to improved cut quality and dispersal. The removal of no more than one third of the grass blade is recommended. During heavy growth times it may require changing blades, mowing more often or raising the height of cut to improve clipping dispersal.


Specs
Key Specs
Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW
At 2800 rpm ISOC: 55.1 hp
Vehicle
Drive pump Tandem gear pump
Ground pressure 82.7 - 124 kPa
12 - 18 psi
Controls
Throttle No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Weight Transfer and Cruise Control Use selection:; Cutting unit drop rate adjustment; ALL settings are pass code protected
Key Specs
Mowing speed 0 - 12.8 km/h
0 - 8 mph
Cutting unit size 68.58 cm
27 in.
Cutting Units
Total width of cut 2.74 m; 17.15 cm overlap between front and rear decks
9 Feet; 108 in.; 6.75 in. overlap between front and rear decks
Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers
Rear: 7.62 cm
Rear: 3 in.
Front: 12.70 cm
Front: 5 in.
409 m
16,097 fpm
Engine
Type Direct Inject Turbocharged Diesel B20 compliant
Compliant emission regulation United States/Canada Final Tier 4
Horsepower Maximum rated horsepower
At 2800 rpm ISOC: 41.1 kW
At 2800 rpm ISOC: 55.1 hp
Cylinders Four
Displacement 2.091 L
127.6 cu in.
Air cleaner 2-stage dry element
Fuel Diesel up to B20 compliant
Cooling system Liquid centrifugal pump; forward machine location for optimum cooling
Vehicle
Cutting units drive Direct-coupled hydraulic gear motor
Hydraulic system capacity 45.4 L
12 U.S. gal.
Fuel tank capacity 60.6 L
16 U.S. gal.
Steering Hydraulic power with dual rod, double acting steering cylinder
Front drive tires 26.5x14-12 6PR Ultra Trac
Steering tires 20x12-10 4PR Turf
Brakes Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS Standard, meets ISO 21299 standards
Controls
Forward/reverse 2-pedal
Mower lift One-touch single handle
Parking brake Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat Air Ride Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO Electric Switch on Command Arm for quick and easy transition from mow to transport
Ignition Key Switch on Command Arm
Work lights 3 standard work lights in front
Tilt steering Left Foot operated for easy adjustment
Storage Operator storage located on left side for easy access from operator seat
Dimensions
Height with ROPS 2220 mm
87.4 in.
Length 3393 mm
134 in.
Transport width 2287 mm @ 101.60 mm height of cut
90 in @ 4 in height of cut
Mowing position width 2.74 m; 17.15 cm overlap between front and rear decks
9 Feet; 108 in; 6.75 in. overlap between front and rear decks
Wheelbase 1750 mm
68.9 in.
Ground speed Mowing
0 - 12.8 km/h
0 - 8 mph
Transport
0 - 20.12 km/h
0 - 12.5 mph
Reverse
0 - 6.4 km/h
0 - 5 mph
Cutting Units
Number 5
Size 68.58 cm
27 in.
Height of cut Construction
single sheet 10-gauge steel stamped deck with front skid plate 1.5 inch (38mm) tall and ½ inch (12.7mm) thick steel stock welded to the decks edge
1.91 to 10.2 cm; no tool adjustment
.75 - 4 in; no tool adjustment
Sound levels
Operator ear full engine 90 dBA
Measuring standard ISO 11201
Warranty
w w
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.

Submitting Form...
Submitting Form...


Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Homestead

127 N Krome Ave
Florida City, FL 33034
305-247-9886

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2024 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group