John Deere 2500B PrecisionCut™ Gas

Feature Overview
John Deere 2500B PrecisionCut™ Gas
  • Greatly reduce triplex ring with exclusive offset cutting units
  • Save time with Quick Adjust Cutting Units
  • Exceptional contour-following and steering of cutting units in turns
  • On-board diagnostics
Number of cylinders 2-cylinder
Displacement 617 cc / 37.7 cu in.
Traction drive Hydrostatic, 2-pedal control
Cutting unit size, in. (cm) Quick Adjust QA5 floating: 55.9 cm / 22 in.
Feature Overview
John Deere 2500B PrecisionCut™ Gas
  • Greatly reduce triplex ring with exclusive offset cutting units
  • Save time with Quick Adjust Cutting Units
  • Exceptional contour-following and steering of cutting units in turns
  • On-board diagnostics
Number of cylinders 2-cylinder
Displacement 617 cc / 37.7 cu in.
Traction drive Hydrostatic, 2-pedal control
Cutting unit size, in. (cm) Quick Adjust QA5 floating: 55.9 cm / 22 in.
We are here to help
Features

Easy service access to minimize time to perform daily maintenance tasks

Daily service checks Daily service checks
Access panel Access panel

Several serviceability features were incorporated into the design of the 2500B PrecisionCut© Riding Greens Mower to make routine checks and adjustments as easy as possible.

Features include:

  • Good visibility to components, with a tilt-back hood and tilt-up seat platform. With the hood and seat platform in the raised position, access and visibility to the components underneath is very good.
  • All daily service checks — engine oil level, air restriction indicator, engine coolant level, and hydraulic oil level — are made from the left side of the machine.
  • Quick-attatch cutting units — one pin located at the front of the lift arms removes the cutting units from the traction unit with no tools.
  • Quick-attatch cutting unit motors — just loosen the two hold-down nuts, twist the motor, and pull it out away from the cutting unit.
  • Remote grease fittings for the front lift arms are located on the front hydraulic fitting bulkhead. These remotely mounted fittings allow ease of lubrication for the front lift arm pivot pins.
  • Electronic controller that provides service diagnostics by means of lighted circuits.
  • There is also an access panel on the operator platform that can be easily removed to provide access to the backlap valve and battery.

The optional direct mount front grass catchers provide the choice of systems to meet the needs on your golf course.

#

The grass catcher is mounted directly to the front cutting unit using a similar design as the SL Walk Greens Mowers.

This provides quick access for the removal and installation of the grass catcher as well as superior ground following and collection due to position of the catcher to the cutting unit.

It is recommended that catchers be emptied after each green during normal and heavy growth times to reduce weight on the cutting unit.

The direct mount grass catchers will fit model year 2009 to current 2500B and 2500E E-Cut Riding Greens Mowers with Quick-Adjust 5 (QA5) cutting units.

Rear grass catcher (1) and bail system (2) Rear grass catcher (1) and bail system (2)

The rear grass-catcher mounting system simplifies removal and installation of the rear grass catcher and reduces effort.

Rear grass catcher Rear grass catcher

The grass catcher can be easily removed without spilling the clippings by rotating the grass catcher back toward the front of the machine until the front grass catcher lip is above the cutting unit side plate. Then, simply pull it out to the side. This can be accomplished with the cutting unit in the raised or lowered position.

Adjustable top shield Adjustable top shield

Adjustable cutting-unit top shields also ensure that grass is thrown into the back of the catcher, even as the reel diameter decreases due to wear. The catchers are shaped and vented to allow the air from the reel to escape while retaining the clippings.

Top-shield extension for dry conditions Top-shield extension for dry conditions

Extensions for the cutting-unit top shields are for use in dry conditions to maximize the flow of dry clippings into the grass catcher. If mowing predominantly in wet-turf conditions, remove the cutting unit shield extensions to reduce buildup and accumulation of clippings on the front of the grass catcher.


Grooved disc rollerGrooved disc roller

The grooved disc roller can be used with 55.9-cm (22-in.) Quick-Adjust 5 (QA5) cutting units, in combination with the GTC and FTC, to provide additional roller options for fairway, tees, and approach areas.

 

The increased diameter improves the durability over smaller rollers and it features hardened discs for improved wear which retains spring tension for reduced maintenance, making it an ideal roller for fairway, tee, and approach mowing.


14-blade reel 14-blade reel
#

Using the QA5 14-blade cutting unit option on Greens Mowers will lower the FOC and also provide a clean, smooth cut. It can increase the playability of the putting surface and greens speed.

 

FOC is defined as the distance traveled between consecutive cuts. It is how far the machine moves from the time one blade passes across the bedknife until the next blade passes. The lower the FOC, the less distance that is traveled until the next blade passes.

 

There is a point of diminishing returns when it comes to FOC. The less distance the mower travels between consecutive cuts, the more times the same grass blade is going to be impacted by the reel. Too low an FOC can cause bruising of the turf — especially in the overlap from pass to pass.

 

FOC is often used as a measurement of cut quality; however, there are other key factors that attribute to gaining superior quality of cut that are more critical than FOC. The factors that lead to good cut quality are:

 

  • Geometry of the cutting unit
  • Sharpness of reels and bedknife
  • Proper cutting-unit setup (parallel and bedknife-to-reel clearance)
  • Height of cut (HOC) (effective versus bench HOC)
  • Bedknife selection
  • Roller selection for the turf conditions
  • Turf conditions

 

The geometry of John Deere cutting units makes the optimum range for FOC between 0.160 in. (4.064 mm) and 0.190 in. (4.824 mm) for Walk Greens Mowers and 0.044 in. (1.1176 mm) per 1 mph (1.6 km/h) for Riding Greens Mowers. Technology of the QA5 cutting units excel and provide a superior cut and after-cut appearance.

 

Machines

Minimum FOC
in. (mm) with 14-blade

180 E-Cut© Walk Greens Mower

0.125 (3.18)

220 E-Cut Walk Greens Mower

0.125 (3.18)

2500B PrecisionCut© Riding Greens Mower and 2500E E-Cut Riding Greens Mower

0.034 (0.86) per 1 mph (1.6 km/h)


Gas engine Gas engine

These mowers feature a 617 cc 21.0 hp* (15.7 kW) engine that is rated at 3600 rpm engine manufacturer gross power tested in accordance with SAE J1995. It has a single fuel tank with a 7..9-gal. (29.9-L) capacity for a productive day of mowing.
 
It features smooth, quiet, and efficient operation:

  • Twin cylinder
  • Overhead valve
  • Full-pressure lubrication

* The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.


Smooth and turf tire options shown Smooth and turf tire options shown
Balloon-rounded tire option Balloon-rounded tire option

There are four tire options:

  • 18x10.50-10 2-ply smooth tires are recommended for those who want the minimum amount of ground compaction. These tires have a large footprint to spread the weight of the vehicle over a larger area. This tire also lowers the overall height of the machine and reduces ground clearance of the cutting units. Compensation for ground clearance can be made by adjusting the cutting unit chain on the back of the cutting unit.
  • 20x10-10 4-ply rated balloon-rounded smooth tires are recommended for those who want maximum ground clearance, increased ply rating and desire to use a more rounded tire. The 4-ply side wall rating has recommended operating tire pressure of 103 kPa (1.03 bar) (15 psi). Increased pressure may leave marks in softer turf conditions.
  • 20x10-10 2-ply smooth tires are recommended for those who want maximum ground clearance while operating at the lower tire pressure of 83 kPa (0.83 bar) (12 psi).
  • 20x10-10 4-ply rated smooth tires are recommended for those who want maximum ground clearance and increased ply rating. The 4-ply sidewall rating has recommended operating tire pressure of 103 kPa (1.03 bar) (15 psi). Increased pressure may mark in softer turf conditions.
  • 20x10-10 turf tires are for those who need additional traction for mowing more difficult areas, such as elevated tees or fairways.

 

Each of these tire options includes a complete set of three tires and wheels that are all the same size. (This includes the turf tires, which come as a set of three treaded tires.)


Rear attaching yokeRear attaching yoke
#

Low weight and compaction of a riding greens mower with the mowing system of a fairway mower equals great quality of cut in fairways and surrounds.

 

Many golf courses want to mow their fairways and other areas with riding greens mowers as a way to decrease compaction of the turf. However, the front-attaching-point yoke system used for greens is not the ideal solution for other areas due to the mowing speed, and the terrain is not as smooth as a green.

The 22-in. (55.88-cm) cutting unit rear-attaching-point yoke kit attaches to the rear cutting unit to help keep the rear roller on the ground consistently in undulating terrain. This also substantially improves cut quality by maintaining a consistent height of cut in virtually any condition. Rather than pushing the cutting unit through the turf, the yoke system pulls the cutting unit through the turf keeping the back end of the cutting unit engaged with the turf.


Grooved disc roller Grooved disc roller

The grooved disc roller can be used with 55.9-cm (22-in.) QA5 cutting units, in combination with the GTC and FTC, to provide additional roller options for fairway, tees, and approach areas.

 

The increased diameter improves the durability over smaller rollers, and it features hardened discs for improved wear which retains spring tension for reduced maintenance, making it an ideal roller for fairway, tee, and approach mowing.


Rear attaching yoke Rear attaching yoke

Low weight and compaction of a riding greens mower with the mowing system of a fairway mower equals great quality of cut in fairways and surrounds.

 

Many golf courses want to mow their fairways and other areas with riding greens mowers as a way to decrease compaction of the turf. However, the front-attaching-point yoke system used for greens is not the ideal solution for other areas due to the mowing speed, and the terrain is not as smooth as a green.

The 55.9-cm (22-in.) cutting unit rear-attaching-point yoke kit attaches to the rear cutting unit to help keep the rear roller on the ground consistently in undulating terrain. This also substantially improves cut quality by maintaining a consistent height of cut in virtually any condition. Rather than pushing the cutting unit through the turf, the yoke system pulls the cutting unit through the turf keeping the back end of the cutting unit engaged with the turf.


Specs
Key Specs
Number of cylinders 2-cylinder
Displacement 617 cc
37.7 cu in.
Traction drive Hydrostatic, 2-pedal control
Cutting unit size, in. (cm) Quick Adjust QA5 floating: 55.9 cm
22 in.
Certification
Number ANSI B71.4-2004
ROPS 2-Post SAE J21294 Roll Over Protection Structure with seat belts meets ISO 21299 standards
Engine Meets CARB and EPA
Cutting Units
Clip frequency For 14 blade: 0.541 mm/km/h
0.034 in./mph
with 11-blade reel: 0.689 mm/km/h
0.044 in./mph
with 7-blade reel: 1.082 mm/km/h
0.069 in./mph
Height of cut 2.0-19.0 mm
0.078-0.75 in.
with front roller: 51 mm
2 in.
or 16-32 mm
0.625-1.25 in.
with front roller: 76 mm
3 in.
Number of blades 7 or 11 blades
Size, in. (cm) Quick Adjust QA5 floating: 55.9 cm
22 in.
Backlapping Standard on-board micro-backlapping and reel speed control
Front rollers Optional 2-in. (5.1-cm) smooth, grooved, or spiral
Reel diameter 5 in. (12.7 cm)
Bedknife adjustment Bedknife-to-reel
Mower lift (1) Cylinder for front two units; (1) cylinder for rear unit
Reel speed Adjustable
Electrical System
Charging system Flywheel, alternator
Alternator capacity 16 amp
Battery type BCI group 40 maintenance-free: 12 V
Starter Electric (solenoid shift)
Engine
Type Gas model
Liquid-Cooled, Gas
Horsepower Gas horsepower
At 3600 rpm: 21.0 kW
21 hp
Engine Manufacturer Gross Power,Tested in accordance with SAE J1995. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s web site for additional information.
Air cleaner Foam precleaner with Paper element
Cooling Oil filter
Full-flow filter
Engine oil capacity
With filter: 2.2 L
2.3 U.S. qt
Pressurized lubrication system
Standard
Number of cylinders
2-cylinder
Displacement
617 cc
37.7 cu in.
Liquid
Instrumentation
Engine oil pressure LED Warning Light
Alternator LED Warning Light
Hydraulic oil temperature LED Warning Light
Engine coolant temperature LED Warning Light
Hourmeter Digital
Operator Controls
Ignition Key start and shutoff
Steering Hydrostatic, adjustable steering column
Reel drive and reel lift Right-hand operated (optional foot-lift controls)
Throttle Right hand
Park brake Right foot
Hydrostatic speed control Forward
Right foot
Reverse
Right foot
Sound Levels
Operator ear 80 dBA
Measuring standard ISO 11201
Attachments installed GTCs and Power Brushes, reels engaged
Vehicle Specifications
Mowing speed Adjustable mow stop: 7.1 km/h
4.4 mph
Wheels and tires Front/rear
18x10.5-10, 2-ply, smooth (low compaction)
20x10-10, 2-ply or 4-ply, smooth
or 20x10-10, 2-ply, turf
Brakes Type
Dual: 15.2 cm
6 in.
Single-pedal, 2-wheel disc brakes
Transport speed 12.9 km/h
8 mph
Reverse speed 0-4.8 km/h
0-3 mph
Ground clearance with catcher 10.2 cm
4 in.
Fuel tank capacity In a single tank: 29.5 L
7.8 U.S. gal.
Muffler Horizontal discharge below frame
Hydrostatic drive system capacity 28.8 L
7.6 U.S. gal.
Hydraulic reservoir capacity (only) 20.4 L
5.4 U.S. gal.
Ground drive, reel drive Drive wheels
Front
Traction drive
Hydrostatic, 2-pedal control
Reel drive
Hydraulic
Pump 3-section gear
Reel control valves Electro-hydraulic, one valve reel on-off and one valve raise-lower
Filtration 10-micron
Weights and Dimensions
Mowing position width 157.5 cm
62 in.
Wheelbase 129.5 cm
51 in.
Tread width 101.5 cm
40 in.
Turning radius, uncut circle 45.7 cm
18 in.
Weight (full fluids, no operator or fuel) 559.2 kg
1233 lb
Height With ROPS: 195.6 cm
77 in.
Accessories and Attachments
Bedknives

For the 3225C and the 3235C equipped with seven-blade standard cutting units, ET17533 will be shipped as the standard 22-in. bedknife.

 

For the 3225C and 3235C equipped with ESP™ cutting units, ET17751 (minimum height of cut is 12 mm) will be shipped as the standard bedknife for the five-blade and eight-blade cutting units. The 10-blade cutting unit will be shipped with MT1928 (minimum height of cut is 9.5 mm) low-cut fairway bedknife.

 

Following are all the bedknife options available for lightweight fairway mower cutting units:


BedknivesBedknives

Choice of four bedknives to meet the need for quality cuts to as low as 5/64 in. (2 mm).


For the 3225C and the 3235C equipped with seven-blade standard cutting units, ET17533 will be shipped as the standard 22-in. bedknife.

 

For the 3225C and 3235C equipped with ESP™ cutting units, ET17751 (minimum height of cut is 12 mm) will be shipped as the standard bedknife for the five-blade and eight-blade cutting units. The 10-blade cutting unit will be shipped with MT1928 (minimum height of cut is 9.5 mm) low-cut fairway bedknife.

 

Following are all the bedknife options available for lightweight fairway mower cutting units:


For the 3225C and the 3235C equipped with seven-blade standard cutting units, ET17533 will be shipped as the standard 22-in. bedknife.

 

For the 3225C and 3235C equipped with ESP™ cutting units, ET17751 (minimum height of cut is 12 mm) will be shipped as the standard bedknife for the five-blade and eight-blade cutting units. The 10-blade cutting unit will be shipped with MT1928 (minimum height of cut is 9.5 mm) low-cut fairway bedknife.

 

Following are all the bedknife options available for lightweight fairway mower cutting units:


For the 3225C and the 3235C equipped with seven-blade standard cutting units, ET17533 will be shipped as the standard 22-in. bedknife.

 

For the 3225C and 3235C equipped with ESP™ cutting units, ET17751 (minimum height of cut is 12 mm) will be shipped as the standard bedknife for the five-blade and eight-blade cutting units. The 10-blade cutting unit will be shipped with MT1928 (minimum height of cut is 9.5 mm) low-cut fairway bedknife.

 

Following are all the bedknife options available for lightweight fairway mower cutting units:


For the 3225C and the 3235C equipped with seven-blade standard cutting units, ET17533 will be shipped as the standard 22-in. bedknife.

 

For the 3225C and 3235C equipped with ESP™ cutting units, ET17751 (minimum height of cut is 12 mm) will be shipped as the standard bedknife for the five-blade and eight-blade cutting units. The 10-blade cutting unit will be shipped with MT1928 (minimum height of cut is 9.5 mm) low-cut fairway bedknife.

 

Following are all the bedknife options available for lightweight fairway mower cutting units:


Cutting Units

(1) QA5 22 In. Vertical Cutting Unit With Front Roller Less Motor - BM25129


(1) QA5 Eleven Blade 22 In. Cutting Unit w/Adjustable 2.0 mm Bedknife, Less Front and Rear Roller & Motor - BM25128


(1) QA5 Seven Blade 22 In. Heavy Section Blade Cutting Unit With Adjustable 4.8 mm Bedknife, Less Yokes, Front and Rear Roller & Motor - BM25127


(1) Quick Adjust 5 (QA5) Fourteen Blade 22 In. (55.9 cm) Cutting Units with Adjustable 2.0mm Bedknife - BM25338


Miscellaneous

(1) 22 In. Fairway Tender Conditioners (FTC) Shaft and Blades - BM22671


(1) 22 In. Front Rotary Turf Brush - BM22761


(1) 22 In. Greens Tender Conditioner (GTC) Shaft and Blades - BM22471


(1) 22 In. Rear Roller Power Brush  - BM22668


(1) 22 In. Smooth Roller Scraper  - BM22995


The rotary brush and GTC are powered by an external gear-drive attachment:

  • Gear-drive design allows the GTC to be turned off or on, a unique feature belt-drive designs cannot offer.
  • The gear-drive attachment adjusts the rotary brush or GTC to 1/32 in. (0.8 mm) below cut for more aggressive grooming or 7/32 in. (5.6 mm) above cut easily without tools.
  • The attachment can easily be raised or lowered into or out of the working position without any tools.

(1) QA5 22 In. Front Rotary DT Brush - BM24730


(1) QA5 Grass Catcher Lip Extension - BM23910


(1) Rear Roller Power Brush Drive - BM22527


Rear attaching yokeRear attaching yoke
#

Low weight and compaction of a riding greens mower with the mowing system of a fairway mower equals great quality of cut in fairways and surrounds.

 

Many golf courses want to mow their fairways and other areas with riding greens mowers as a way to decrease compaction of the turf. However, the front-attaching-point yoke system used for greens is not the ideal solution for other areas due to the mowing speed, and the terrain is not as smooth as a green.

The 22-in. (55.88-cm) cutting unit rear-attaching-point yoke kit attaches to the rear cutting unit to help keep the rear roller on the ground consistently in undulating terrain. This also substantially improves cut quality by maintaining a consistent height of cut in virtually any condition. Rather than pushing the cutting unit through the turf, the yoke system pulls the cutting unit through the turf keeping the back end of the cutting unit engaged with the turf.


2"x 22" Machine Grooved Roller Scraper - TCA19547


3"X22" GROOVE ROLLER SCRAPER - BM23002


Arm Rest Kit (Includes One Arm Rest and Hardware) - AMT2477


Cutting Unit Top Shield Extension (Set of 3) - BM23080


Cutting Unit Yokes Kit (22") for MY1998-2008 - TCB11356


Cutting Unit Yokes Kit for MY 2009 – Current or QA5 Cutting Units - TCB11341


Dew Whip with end support bracket - BTC10686


Direct Mount Cutting Unit Yoke Kit for MY 2009 – Current or QA5 Cutting Units - BTC10655


Direct Mount Front Grass Catcher - BTC10726


Direct Mount QA5 Grass Catcher Brackets - BM24900


Grass Catcher Mounting Kit - TCB11721


Grass Catcher with large paddle clip (22 Low Profile) - BTC10718


Height of Cut Gauge Bar - AMT2978


Hydraulic oil leak detection kitHydraulic oil leak detection kit

Kit includes parts needed to install a hydraulic oil leak detector for those desiring additional insurance against potential turf damage.

 

This kit will fit either gas or diesel 2500B Tri-Plex Greens Mowers and will alert the operator with both an audible alarm and a visual warning light in the event a hydraulic oil leak is detected.


Light kitLight kit

Includes one halogen beam working light for early-morning or late-evening operation.


QA5 Grass Catcher Side Plate Insert - BM24199


Rear Grass Catcher Bail Kit - BTC10407


Rear Grass Catcher with Handles - BTC10408


For increased traction in adverse, wet, or sloped mowing areas.

 

Third-wheel assist is automatically engaged when the PTO switch is pulled to the on position to engage the mow circuit. This also automatically reduces forward speed to 4 mph (6.4 km/h).


Tires and Wheels (18x10.50-10), (3) Smooth Floatation - BM19750


Tires and Wheels (20x10.00-10), (3) Ballon Rounded Edge Smooth 4 Ply-Rated - BTC10841


Tires and Wheels (20x10.00-10), (3) Smooth - BM19748


Tires and Wheels (20x10.00-10), (3) Smooth 4 Ply-Rated - BTC10071


Tires and Wheels (20x10.00-10), (3) Turf Guard Traction - BM19749


Weight Transfer Grass Catcher Mounting Kit - BTC10914


Reel Cutting Unit Counter Weights

(1) Cutting Unit ONLY Counter Weight Kit - BM22762


(1) QA5 Cutting Unit Brush Only Counter Weight Kit - BM22705


(1) QA5 FTC/GTC ONLY Counter Weight Kit - BM22704


Rollers
Machine-grooved front roller with solid endcapsMachine-grooved front roller with solid endcaps

Machine-grooved front rollerMachine-grooved front roller

Grooved front rollersGrooved front rollers

Grooved front rollers maintain height of cut while allowing superintendent to experience a better quality of cut versus a smooth roller.


Wide tube/hollow smooth front rollerWide tube/hollow smooth front roller

(1) 22 In. 2 In. (5cm) MT Grooved  Roller - BTC10267


(1) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Front Roller - BM25317


Spiral-grooved front rollerSpiral-grooved front roller

The 3-in. (7.6-cm) diameter spiral-grooved rollers with spiral endcaps should be used with seven-blade heavy-section cutting units for mowing tees, collars, approaches, or fairways.

 

The height-of-cut range with these rollers is 5/8 in. to 1-1/4 in. (16 mm to 32 mm). Using the 3-in. (7.6-cm) diameter spiral-grooved rollers with spiral endcaps for a height of cut greater than 3/4 in. (19 mm) requires changing the height-of-cut bolt on the rear adjusters to M10 x 70.

 

NOTE: These rollers should not be used for greens mowing.


(1) 2X22" MT SPIRAL Roller - BM23566


*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group