John Deere 180 E-Cut™ Hybrid

DEBUG Ind: Golf And Sports Turf, Cat: Mowers, SubCat: Walk Greens Mowers, SubSubCat: 180 E Cut Hybrid Mower
Feature Overview
John Deere 180 E-Cut™ Hybrid
  • Quick-Adjust 5 (QA5) cutting units
  • Electric reel-drive system for excellent contour following
  • Dual traction rolls for straight tracking
  • Adjustable frequency of clip
Engine Type Air-cooled, Gas
Reel diameter 127 mm / 5 in.
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Feature Overview
John Deere 180 E-Cut™ Hybrid
  • Quick-Adjust 5 (QA5) cutting units
  • Electric reel-drive system for excellent contour following
  • Dual traction rolls for straight tracking
  • Adjustable frequency of clip
Engine Type Air-cooled, Gas
Reel diameter 127 mm / 5 in.
Get Financed
Request a Demo/Quote

*Inventory shortages may cause extended delivery dates

*This price does not include attachments and accesories

Value Your Trade
Features

Grass-catcher system — fixed to the plane of the reel for maximum performance in severe undulations

Grass-catcherGrass-catcher
#

The direct-mounting grass catcher is designed to retain clippings by slowing down the air volume and routing it out of the catcher while keeping the clippings in. Molded-in grooves and mounting brackets make it easy to remove and replace the catcher. The catcher is made of lightweight polyethylene material that resists corrosion and cracking, reduces vibration, and is easy to use.

Overlap marks for lining up to previous pass are molded into the top of the catcher for increased productivity and straightly mowed passes.

The direct-mounting design grass-catcher system is fixed to the same plane as the reel. This means the grass catcher follows contours exactly as the reel does, maximizing the volume of grass thrown into the catcher. It also increases operator productivity by the easy removal and installation of the grass catcher.


Traction drum Traction drum
#

The dual traction rolls for the rear drum are powered by an external differential drive. This design provides equal power to both rolls for the straightest possible tracking. The external differential drive and split drum work together to allow minimal turning efforts and excellent maneuverability when making turns and mowing cleanup passes.

 

The traction-drive rolls are constructed of aluminum, which offers corrosion resistance for durability and a long life. The smooth roller surface on the 180 E-Cut© and 220 E-Cut Hybrid Walk Greens Mowers provide an evenly-rolled appearance on greens and other mowing surfaces.

 

The outside ends of the traction rolls are tapered to provide a smooth transition between the rolled and non-rolled surface areas.


Frequency of clip dial Frequency of clip dial
#

The buzz in the industry is all about frequency of clip. But what exactly is it? Frequency of clip is defined as the distance traveled between consecutive cuts. In other words, it is how far the machine moves from the time one blade passes across the bedknife until the next blade passes. The lower the frequency of clip, the less distance that is traveled until the next blade passes.

 

Some will say that the lower the frequency of clip the better the cut quality, but that is a misconception as the key factors of cut quality are the following:

  • Geometry of the cutting unit
  • Sharpness of reels and bedknife
  • Proper cutting unit set up (parallel and bedknife to reel)
  • Height of cut
  • Bedknife selection
  • Roller selection for the turf conditions
  • Turf conditions

There is a point of diminishing returns when it comes to frequency of clip. The less distance the mower travels between consecutive cuts, the more times the same grass blade is going to be impacted by the reel, which leads to bruising of the turf ™ especially in the overlap from pass to pass.

 

 

Optimum frequency of clip

 

So, what is the optimum frequency of clip? It all depends on conditions. And the 180 E-Cut© and 220 E-Cut Hybrid Walk Greens Mowers give the ability to establish a frequency of clip that is appropriate for individual conditions.

 

The adjustment is a rotary dial located behind the handlebars. The system comes with a standard locking cover that must be accessed with tools, ensuring only those trusted to make this change, such as the superintendent or technician, can do so.

 

Once the frequency of clip is established, the 180 E-Cut and 220 E-Cut Hybrid Walk Greens Mowers mow at that frequency of clip, no matter the traction speed of the machine. 

 

It does this by monitoring the engine rpm. As the throttle is decreased, the controller slows down the reel motor to match the new speed of the traction system, maintaining a constant frequency of clip. As the throttle is increased, the controller speeds up the reel motor to maintain the frequency of clip.

 

Similar to the SL Series Walk Greens Mowers, this system keeps frequency of clip the same from operator to operator. This means no cut quality difference between more experienced operators mowing at a faster ground speed and less experienced operators mowing at a slower ground speed.


Diagnostic light Diagnostic light
Service ADVISOR© location Service ADVISOR© location

For quick and easy troubleshooting should an issue arise, a diagnostic light is located on top of the handlebar cover. If the electrical system sees a problem, a diagnostic code flashes through the indicator light. The code is repeated until the power take-off (PTO) switch is cycled off and on again, or the engine is shut off and turned on again. 

 

When a code is discovered, consult the technical manual for additional troubleshooting information. If a continuing condition exists, the diagnostic code displays again when the engine is started, until the original condition is corrected.

 

The controller is also configured to store any code that has been displayed, so dealers can see a detailed history of the unit to aid in additional troubleshooting. The information is accessible by dealer technicians only using Service ADVISOR.


Ball-joint mounting system Ball-joint mounting system
#

The primary purpose of walk greens mowers with independent cutting units is to follow contours. It is in this area the 180 E-Cut© and 220 E-Cut Hybrid Walk Greens Mowers truly excel.

 

Ball-joint mounting system

 

It all starts with the ball-joint mounting system that attaches the cutting unit to the traction drive system. Similar to the PrecisionCut©, E-Cut hybrid riding greens mowers, and fairway mowers with Quick-Adjust 5 (QA5) cutting units, the ball-mounting system allows the cutting unit to rotate in any direction.

 

The cutting unit not only moves fore and aft, and laterally side-to-side, it also steers in turns, which translates to a much more turf-friendly premium cut in cleanup passes around the perimeter of the green.

 

Due to the ball-joint design, and also the fact that the wiring harness is the only connection to the reel drive system, the cutting unit has virtually no mechanical linkage to restrict movement of the cutting unit in the toughest of undulations.

 

It is basically a one-gang triplex, and many are familiar with how well the PrecisionCut and E-Cut hybrid riding greens mowers follow contours, especially in the cleanup passes.

 

For maintenance, the reel can be removed by simply removing a pin, and the electric motor itself features a quick-attach design by simply loosening two 15-mm bolts, turning the motor slightly, and pulling the motor off of the cutting unit.

Cutting unit limit chains Cutting unit limit chains
#

 

Control contour following

 

Limit chains on each side of the cutting unit control how much the cutting unit contours while mowing, while also controlling the amount of rear-roller drop when the unit is lifted for turns.

 

The initial setting of the chain is exactly the same as the 2500B PrecisionCut and 2500E E-Cut Hybrid Riding Greens Mowers. Two links should hang free, which means the chain itself is shortened to seven links. The upper chain anchor studs should be centered in their slots. This setting provides maximum contour following and maximum rear-roller drop when lifted.

 

However, the majority of greens will not require maximum contour following. Turning and maneuvering are easiest when the amount of contour following is limited to the requirements of the surface being mowed. 

 

To limit the contour following of the cutting units, adjust the upper chain anchor studs backward in the slots to limit float and reduce the rear-roller drop. If further limitation is desired, shorten the chain to six links (three hanging free), and move the upper chain anchor studs forward in their slots.


Electric reel motor Electric reel motor
Reel controller Reel controller

The benefits of hybrid technology are numerous. The 2500E E-Cut© Hybrid Riding Greens Mowers and E-Cut Hybrid fairway mowers are proof of that.

 

So why not move that same technology to the walk-behind greens mowers? With the 180 E-Cut and 220 E-Cut Hybrid Walk Greens Mowers, hybrid technology is now at your disposal on even the most undulating of greens.

 

In the case of walk greens mowers, hybrid technology provides more benefits than just noise reduction, fuel savings, and the elimination of any hydraulic leak points. With the 180 E-Cut and 220 E-Cut Hybrid Walk Greens Mower platform, the hybrid technology also allows a truly independent cutting unit that quickly reacts to contours, not only allowing the cutting unit to pivot laterally and fore-aft, but also to turn side to side for mowing cleanup passes.

 

Because of the hybrid technology in the 180 E-Cut and 220 E-Cut Hybrid, the only link between the cutting unit and the traction unit for turning the reels off and on is the wiring harness. The wiring harness can easily move in any direction the cutting unit needs to go. There are no hard linkages in the reel-drive system to limit the cutting unit's ability to follow contours.

 

In addition, the electric drive system makes it easy to backlap by simply flipping a switch. No need for a special backlapping tool to spin the reel in reverse. It is all on board the 180 E-Cut and 220 E-Cut Hybrid as base equipment.

 

Frequency of clip is also adjustable by a dial behind the handlebar cover.

 

The system is powered by a Honda® engine, which turns an electric motor that is used as a generator. In between this motor and the electric reel-drive motor is the reel controller itself.

 

Similar to the controllers used on the 2500E E-Cut Hybrid Greens Mowers and E-Cut Hybrid fairway mowers, the controller takes the power from the generator and controls the reel speed. This particular controller monitors engine rpm and controls reel speed to precisely match the frequency of clip that has been set.

 

The electric reel-drive motor itself is the same one used on the 2500E E-Cut Hybrid Riding Greens Mowers and E-Cut fairway mowers ™ proven technology with proven results.

 

Honda is a U.S.-registered trademark of Honda Motor Company.


Backlapping switch Backlapping switch
#

A significant benefit to the electric reel-drive system is that it is very simple to change the direction of the motor, which allows the cutting unit to spin either forward for mowing or backward for backlapping.

 

The 180 E-Cut© and 220 E-Cut Hybrid Walk Greens Mowers can be backlapped without needing any external devices to drive the reel backward. It can do it all by itself with a simple toggle switch located on the rear left-hand side of the machine.

 

To backlap, simply set the park brake, start the engine, toggle the mow or backlap switch to backlap, and turn on the power take-off (PTO) by toggling the PTO rocker switch on the front of the handlebar cover. The reel controller automatically sets the optimum backlapping speed; no special tools or rotary dials are needed to adjust the speed.

 

This onboard backlapping saves a lot of time and money, while keeping reels in top shape for a premium quality of cut.


14-blade reel 14-blade reel
#

Using the QA5 14-blade cutting unit option on Greens Mowers will lower the FOC and also provide a clean, smooth cut. It can increase the playability of the putting surface and greens speed.

 

FOC is defined as the distance traveled between consecutive cuts. It is how far the machine moves from the time one blade passes across the bedknife until the next blade passes. The lower the FOC, the less distance that is traveled until the next blade passes.

 

There is a point of diminishing returns when it comes to FOC. The less distance the mower travels between consecutive cuts, the more times the same grass blade is going to be impacted by the reel. Too low an FOC can cause bruising of the turf — especially in the overlap from pass to pass.

 

FOC is often used as a measurement of cut quality; however, there are other key factors that attribute to gaining superior quality of cut that are more critical than FOC. The factors that lead to good cut quality are:

 

  • Geometry of the cutting unit
  • Sharpness of reels and bedknife
  • Proper cutting-unit setup (parallel and bedknife-to-reel clearance)
  • Height of cut (HOC) (effective versus bench HOC)
  • Bedknife selection
  • Roller selection for the turf conditions
  • Turf conditions

 

The geometry of John Deere cutting units makes the optimum range for FOC between 0.160 in. (4.064 mm) and 0.190 in. (4.824 mm) for Walk Greens Mowers and 0.044 in. (1.1176 mm) per 1 mph (1.6 km/h) for Riding Greens Mowers. Technology of the QA5 cutting units excel and provide a superior cut and after-cut appearance.

 

Machines

Minimum FOC
in. (mm) with 14-blade

180 E-Cut© Walk Greens Mower

0.125 (3.18)

220 E-Cut Walk Greens Mower

0.125 (3.18)

2500B PrecisionCut© Riding Greens Mower and 2500E E-Cut Riding Greens Mower

0.034 (0.86) per 1 mph (1.6 km/h)


Grass-catcher Grass-catcher
#

The direct-mounting grass catcher is designed to retain clippings by slowing down the air volume and routing it out of the catcher while keeping the clippings in. Molded-in grooves and mounting brackets make it easy to remove and replace the catcher. The catcher is made of lightweight polyethylene material that resists corrosion and cracking, reduces vibration, and is easy to use.

Overlap marks for lining up to previous pass are molded into the top of the catcher for increased productivity and straightly mowed passes.

The direct-mounting design grass-catcher system is fixed to the same plane as the reel. This means the grass catcher follows contours exactly as the reel does, maximizing the volume of grass thrown into the catcher. It also increases operator productivity by the easy removal and installation of the grass catcher.


Specs
Key Specs
Engine Type Air-cooled, Gas
Engine
Horsepower At 3600 rpm: 2.4 kW
3.2 hp
Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Cutting equipment
Cutting width 45.7 cm
18 in.
Key Specs
Reel diameter 127 mm
5 in.
Reel
Number of blades 7, 11 or 14 blade
Cutting equipment
Frequency of clip standard Variable with 5 settings 11 Blade 4.1, 4.6, 5.6, 9.7, 12.2; 14 Blade 3.2, 3.6, 4.4, 7.6, 9.6 mm
Variable with 5 settings 11 Blade 0.162, 0.180, 0.220, 0.380, 0.480; 14 Blade 0.120, 0.140, 0.180, 0.300, 0.380 in.
Clutches
Traction drum Dual, aluminum
Traveling device
Forward speed With transport wheels at 3000 engine rpm: 7.2 km/h
4.5 mph
Dimensions
Weight (less GTCs, gear drive and transport wheel with catcher) 113 kg
249 lb
Sound levels
Operator ear 79 dBA
Grass catcher
Type Polyethylene
Engine
Cycle 4-cycle
Bore and stroke 60x42 mm
2.36x1.65 in.
Piston displacement 7.4 cu in.
122 cc
Compression ratio 8.5:1
Direction of rotation of output shaft Counterclockwise viewed from shaft side
Inclination limit Tilted up to 20 degrees in any direction
Idle speed at output shaft 1400 (+/- 150) rpm
Maximum speed at output shaft 2950 (+/- 150) rpm
Fuel
Tank capacity 2.5 L
0.66 U.S. gal.
Oil
Capacity 0.6 L
0.63 U.S. qt
Differential drive capacity 0.14 L
0.3 U.S. qt
Cutting equipment
Cutting height (minimum) Standard - 3.0-mm bedknife
Min. 3.2 mm
0.125 in.
Max. 22 mm
0.875 in.
Optional - 2.5-mm bedknife
Min. 2.5 mm
0.098 in.
Max. 22 mm
0.875 in.
option
Optional - 2.0-mm bedknife
Min. 2.0 mm
0.078 in.
Max. 22 mm
0.875 in.
standard
Reel
Diameter 127 mm
5 in.
Material Heat-treated chromium molybdenum steel
Optional rotary brush and Greens Tender™ Conditioner (GTC)
Brush Interlocked with reel, rotation in reverse direction; 2-3/8-in. (60-mm) diameter nylon
Adjustable brush or cutter height Brush even with height-of-cut; GTC below height-of-cut maximum: 0.8 mm
0.0313 in.
Gear drive Gear driven from reel shaft, opposite direction of reel, rotation powers brush or GTC vertical cutter
Grass catcher
Size, lb (kg) 3.2 kg
7 lb
Clutches
Transport Belt tension
Reel jaw-type clutch On/off
Brush/GTC jaw-type clutch On/off
Traveling device
Roller - rear Aluminum, diameter: 190 mm
7.5 in.
Roller - front (grooved or smooth) Machined steel, diameter: 50 mm
2 in.
for cutting height adjustment
Dimensions
Length (with tires installed) 99 cm
39 in.
Width (with tires installed) 94.6 cm
37.25 in.
Height (with tires installed) 119 cm
47 in.
Sound levels
Measuring standard ISO 11201
Attachments installed GTCs, reels engaged
Accessories and Attachments
Bedknives
BedknivesBedknives

Choice of four bedknives to meet the need for quality cuts to as low as 5/64 in. (2 mm).


BedknivesBedknives

Choice of four bedknives to meet the need for quality cuts to as low as 5/64 in. (2 mm).


Cutting Units

(1) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with Yokes, less Front and Rear Rollers, Motors and Counter Weight - BM25126


(1) Quick Adjust 5 (QA5) Fourteen Blade 18 In. Cutting Units - BM25337


(1) Quick Adjust 5 (QA5) Seven Blade 18 In. Heavy Section Standard Cutting Units with 4.8mm bedknife, Less Front and Rear Rollers, Motors and Counter Weights - BM25125


Miscellaneous

Direct Mount QA5 Grass Catcher Brackets - BM24900


Transport Wheels and Stand - BM22616


QA5 Grass Catcher Side Plate Insert - BM24199


Push Brush - BM25531


Light Kit - BM22615


Greens Tender Conditioner - BM24358


Direct Mount Grass Catcher (18") - BTC10629


14 Blade Reel - TCA23622


(1) QA5 Grass Catcher Lip Extension - BM23910


(1) QA5 18 In. Front Rotary DT Brush - BM24732


The rotary brush and GTC are powered by an external gear-drive attachment:

  • Gear-drive design allows the GTC to be turned off or on, a unique feature belt-drive designs cannot offer.
  • The gear-drive attachment adjusts the rotary brush or GTC to 1/32 in. (0.8 mm) below cut for more aggressive grooming or 7/32 in. (5.6 mm) above cut easily without tools.
  • The attachment can easily be raised or lowered into or out of the working position without any tools.

(1) 18 In. Rear Grass Catcher with large paddle clip - BTC10716


(1) 18 In. Front Rotary Turf Brush - BM24374


Reel Cutting Unit Counter Weights

(1) Cutting Unit ONLY Counter Weight Kit - BM22762


(1) QA5 FTC/GTC ONLY Counter Weight Kit - BM22704


Rollers

(1) 18 In. 2 In. (5 cm) Diameter Hollow Smooth Roller - BM24204


Front rollersFront rollers

Choice of two front rollers for cutting-height adjustment:

  • Machined grooved
  • Machined smooth

 

Both machined front rollers have an extremely consistent round surface, which enables very precise adjustments at low heights of cut.


Front rollersFront rollers

Choice of two front rollers for cutting-height adjustment:

  • Machined grooved
  • Machined smooth

 

Both machined front rollers have an extremely consistent round surface, which enables very precise adjustments at low heights of cut.


(1) 18 In. 2 In. (5 cm) Diameter Wide Tube/Hollow Smooth Roller - BM24203


*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.

Submitting Form...
Submitting Form...


Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Homestead

127 N Krome Ave
Florida City, FL 33034
305-247-9886

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2024 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group