John Deere Aercore 1000

John Deere Aercore 1000 Product Photo
Feature Overview
John Deere Aercore 1000
  • 37.5-inch coring swath
  • Up to 4-inch coring depth
  • Flexi-link supporting arm
  • Fiberglass reinforced belts for quiet operation
Productivity 2.4 x 2.0-in. (30 x 50 mm) / 1,859 sq m/hr / 20,013 sq ft/hr / 2.4 x 2.5-in. (30 x 64 mm) / 2,324 sq m/hr / 25,016 sq ft/hr / 2.4 x 3.0-in. (30 x 76 mm) / 2,789 sq m/hr / 30,020 sq ft/hr / 2.4 x 4.0-in. (30 x 101 mm) / 3,718 sq m/hr / 40,026 sq ft/hr / 2.4 x 4.5-in. (30 x 111 mm) / 4,069 sq m/hr / 45,030 sq ft/hr / 2.4 x 5.0-in. (30 x 127 mm) / 4,648 sq m/hr / 50,033 sq ft/hr /
Call 866-609-0240 for Pricing Details

ProductivityProductivity
#

Productivity for aeration equipment is measured in two ways:

  • Square feet per hour
  • The number of holes per square foot

The Aercore™ models excel in both areas. All of these aerators can pull as many as 30 cores per square foot. The number of holes per square foot is a variable number based on the ground speed of the tractor.  Most competitors try to quote high numbers of square feet per hour.

Belt drive systemBelt drive system

The Aercore™ 2000, 1500, and 1000 use the same belt-driven design, which provides a quiet, smooth operation that does not require lubrication. A matched pair of fiberglass-reinforced belts provides long life and requires minimal adjustments.

 

Even the occasional belt replacement is made easy by having all the belt drive components located on top of the machine, where they are easily accessible. All the drive components are easily located for daily checks and routine maintenance. The entire drive assembly utilizes sealed bearings, so there is no need for daily lubrication.

The Aercore™ 1000, 1500, and 2000 have a large, 6-in. (15.2-cm) diameter roller, which provides better ground clearance and reduces the potential for turf scuffing in undulating areas.

Tine holdersTine holders
#

Four sizes of tine holders are available for the Aercore™ aerators; the choice is determined by the turf's needs:

  • 4X tine holders are suited for those who want larger tines that have the closest-possible side-to-side hole spacing. The 4X tine holders have a hole spacing of 2.4 in. (61 mm).  There are two 4X tine holders—one for tines with a 7/8-in. (22.2-mm) mounting diameter and one for tines with a 3/4-in. (19.0-mm) mounting diameter.
  • 3X tine holders are also for larger tines, but at a wider spacing. The 3X tine holders have a spacing of 3.2 in. (81.3 mm). There are also 3X tine holders—one for tines with a 7/8-in. (22.2-mm) mounting diameter and one for tines with a 3/4-in. (19.0-mm) mounting diameter.
  • Mini tine holders are for those who want to poke a lot of small holes. Mini tine holders provide a hole spacing of 1-3/8 in. (34.5 mm). The mini tine holder is compatible with tines that have a 3/8-in. (9.65-mm) mounting diameter.
  • Needle tine holders are for making the smallest-possible hole when aerating greens. Disruptions of play can be minimized by not having to pick up cores after aeration. Needle tine holders provide a hole spacing of 1-3/8 in. (34.5 mm). The needle tine holder is compatible with both the 0.20-in. (5-mm) and 0.31-in. (8-mm) tines. NOTE: These holders are for the L-shaped needle tines.
Attachment numberAttachment descriptionRequired quantities
  100015002000
BTC10180(2) 4x tine holders for tines with 3/4-in. (19-mm)mounting diameter234
BTC10181(2) 4x tine holders for tines with 7/8-in. (22.2-mm) mounting diameter234
BTC10182(2) 3x tine holders for tines with 7/8-in. (22.2-mm) mounting diameter234
BTC10183(2) mini tine holders234
BTC10184(2) needle tine holders234
BTC101853x turf guard base kit111
BTC101863x turf guard add kit for 1500, 2000 12
BTC101874x turf guard base kit111
BTC101884x turf guard add kit for 1500, 2000 12
BTC10189Needle/mini tine base kit111
BTC10190Needle/mini tine add kit for 1500 12

 

*Part numbers in kit descriptions do not include hardware

Park standsPark stands

The park stand design allows quick and easy removal of the park stands for aerification and easy attachment for storage. No tools are needed to remove and attach the improved park stands.

These park stands are standard equipment according to the follow serial number ranges and are retrofittable to prior machines:

  • 1000 Aercore™ - TC1000X045001 and above
  • 1500 Aercore - TC1500X045001 and above
  • 2000 Aercore - TC2000X015001 and above

Aercore™ 1000 service accessAercore™ 1000 service access

Serviceability is a key issue on aeration equipment, and the Aercore 1000, 1500, and 2000 have the best service access in the industry. As the photo illustrates, with the cover lifted up, the drive assembly is readily accessed.

The entire tine ram assembly can be removed in a matter of minutes by removing a single cap screw on the top end and four bolts on the rear frame. Tines can easily be changed from the rear of the machine in minutes, as well.

Access to the tine holders is also achieved from the rear of the machine, making it very convenient to alter the hole spacing with a different set of tine holders. Belt changes can be easily accomplished because they are readily accessible.

Key Specs
Productivity 2.4 x 2.0-in. (30 x 50 mm)
1,859 sq m/hr
20,013 sq ft/hr
2.4 x 2.5-in. (30 x 64 mm)
2,324 sq m/hr
25,016 sq ft/hr
2.4 x 3.0-in. (30 x 76 mm)
2,789 sq m/hr
30,020 sq ft/hr
2.4 x 4.0-in. (30 x 101 mm)
3,718 sq m/hr
40,026 sq ft/hr
2.4 x 4.5-in. (30 x 111 mm)
4,069 sq m/hr
45,030 sq ft/hr
2.4 x 5.0-in. (30 x 127 mm)
4,648 sq m/hr
50,033 sq ft/hr
Dimensions
Weight 392 kg
865 lb
Height 990 mm
39 in.
Width 1160 mm
45.7 in.
Length 845 mm
33 in.
Machine
Coring width 95.25 cm
37.5 in.
Coring depth Up to 100 mm
4 in.
Hole pattern Option 1
With 4X tine holders, variable 61x51-127 mm
2.4x2.0-5.0 in.
Option 2
With 3X tine holders, variable 81.3x50-125 mm
3.2x2.0-5.0 in.
Productivity
2.4 x 2.0-in. (30 x 50 mm) 1,859 sq m/hr
20,013 sq ft/hr
2.4 x 2.5-in. (30 x 64 mm) 2,324 sq m/hr
25,016 sq ft/hr
2.4 x 3.0-in. (30 x 76 mm) 2,789 sq m/hr
30,020 sq ft/hr
2.4 x 4.0-in. (30 x 101 mm) 3,718 sq m/hr
40,026 sq ft/hr
2.4 x 4.5-in. (30 x 111 mm) 4,069 sq m/hr
45,030 sq ft/hr
2.4 x 5.0-in. (30 x 127 mm) 4,648 sq m/hr
50,033 sq ft/hr
Tine Sizes, Open Side
Option 6 0.5 in.
12.7 mm
Option 7 0.375 in.
10 mm
Option 8 0.25 in.
6.35 mm
Tine Sizes, Solid
Option 1 Needle tines - 5 and 8 mm
Option 2 16 mm
5/8 in.
Option 3 10 mm
0.375 in.
Option 4 Cross with rib: 12.7 mm
0.5 in.
Option 5 Super Cross with rib: 19 mm
0.75 in.
Belle Glade

2017 NW 16th St
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Clearwater

5090 Ulmerton Rd
Clearwater, FL 33760
727-828-8200

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
Sarasota

6209 McIntosh Rd
Sarasota, FL 34238
941-924-9709

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group