John Deere 6135HFC09

Feature Overview
John Deere 6135HFC09
  • PowerTech™ PSS
  • 309-448 kW (414-600 hp)
Feature Overview
John Deere 6135HFC09
  • PowerTech™ PSS
  • 309-448 kW (414-600 hp)
We are here to help

Series turbocharger

  • Fresh air is first drawn into the low-pressure turbocharger (fixed geometry) and compressed to a higher pressure. The compressed air is then drawn into the high-pressure turbocharger (VGT or WGT), where the air is further compressed. The high-pressure air is then routed through a charge air cooler and into the engine's intake manifold. By splitting the work between two turbochargers, both can operate at peak efficiency and at slower rotating speeds — lowering stress on turbocharger components and improving reliability. Series turbocharging delivers more boost pressure than single turbocharger configurations, which results in higher power density, improved low-speed torque, and improved high-altitude operation.

  • EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing Nox.

  • These engines utilize a catalyzed exhaust filter that contains a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). The DOC reacts with exhaust gases to reduce carbon monoxide, hydrocarbons, and some particulate matter (PM). The downstream DPF traps and holds the remaining PM. Trapped particles are oxidized within the DPF through a continuous cleaning process called passive regeneration. Passive regeneration occurs during normal operating conditions when heat from the exhaust stream and catalysts within the exhaust filter trigger the oxidation of the trapped PM. If passive regeneration cannot be achieved due to low temperature, load, or speed, then PM is removed using active regeneration — an automatic cleaning process controlled by the exhaust temperature management system.

  • John Deere engines feature an SCR system that utilizes a urea-based additive, sometimes referred to as diesel exhaust fluid (DEF). The ammonia in the urea mixes with engine exhaust gases in the SCR catalyst to reduce NOx — converting it to nitrogen and water vapor.

  • The EUI fuel system provides higher injection pressures up to 2,350 bar (34,000 psi). It also controls fuel injection timing and provides precise control for start, duration, and end of injection.

  • The 4-valve cylinder head provides excellent airflow resulting in greater low-speed torque and better transient response time by utilizing a cross-flow design.

  • This is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs.

  • Lower installed cost
  • Mounting points are the same as previous models

  • Multiple rated speeds to further reduce noise and improve fuel economy
  • Peak torque equal to or better than Interim Tier 4/Stage III B
  • Transient response time equal to Interim Tier 4/Stage III B
  • Low-speed torque similar to Interim Tier 4/Stage III B
  • Optional power bulge equal to or better than Interim Tier 4/Stage III B

  • Faster engine control unit (ECU) manages both the engine and the aftertreatment system
  • Four times the memory, twice the RAM and double the processing speed
  • The input/output capability has increased 40%
  • Premium software option integrates with equipment or vehicles to reduce engineering and installation costs

  • Durable gear-driven auxiliary drives
  • Gear-driven water pump
  • 500-hour oil change
  • Replaceable (wet) cylinder
  • Self-adjusting poly-vee fan drive
  • Optional factory installed variable-speed fan drive
  • Improves fuel economy and reduces noise levels
  • Single-piece low-friction steel piston with integrated oil cooled gallery
  • Directed top-liner cooling
  • Low-pressure fuel system with electrical transfer pump and "auto-prime" feature
  • Optional rear PTO
  • *Available on all PowerTech PSS engines unless noted

DOC/DPF Dimensions
Size 7 - Diameter - mm (in) 331.7 (13.1)
Size 7 - Length - mm (in) 838 (33.0)
Size 7 - Weight - kg (lb) 66.4 (146.4)
General engine data
Model 6135HFC09
Number of cylinders 6
Displacement-- L (cu in) 13.5 (824)
Bore and Stroke-- mm (in) 132 x 165 (5.20 x 6.50)
Compression Ratio 15.3 : 1
Engine Type In-line, 4 Cycle
Aspiration Turbocharged and air-to-air aftercooled
Length - mm (in) 1501 (59.1)
Width-- mm (in) 955 (37.6)
Height-- mm (in) 1551 (61.1)
Weight, dry - kg (lb) 1500 (3307)
Performance data range
Intermittent - Rated power/Rated speed 392-448 kW (525-600 hp) @2100 rpm
Intermittent - Peak power 439-460 kW (589-617 hp) @1900 rpm
Intermittent - Power bulge 3-12 % @1900 rpm
Intermittent - Peak torque 2520-2750 N·m (1859-2028 ft-lb) @1550 rpm
Intermittent - Torque rise 35-41%
Heavy Duty - Rated power/Rated speed 373-392 kW (500-525 hp) @2100 rpm
Heavy Duty - Peak power 413-418 kW (554-561 hp) @1700-1900 rpm
Heavy Duty - Power bulge 5-12 % @1900 rpm
Heavy Duty - Peak torque 2397-2520 N·m (1768-1859 ft-lb) @1550 rpm
Heavy Duty - Torque rise 41%
Continuous - Rated power/Rated speed 309-373 kW (414-500 hp) @2100 rpm
Continuous - Peak power 326-394 kW (437-528 hp) @1700 rpm
Continuous - Power bulge 6 % @1900 rpm
Continuous - Peak torque 1986-2397 N·m (1465-1768 ft-lb) @1550 rpm
Continuous - Torque rise 41%
SCR Catalyst Dimensions
Size 7 - Diameter -mm(in) 380.8 (15.0)
Size 7 - Weight -kg(lb) 67.5 (148.8)
Size 7 - Length -mm(in) 860.1 (33.9)
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426

Map & Hours

22255 Cortez Blvd
Brooksville, FL 34601

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947

Map & Hours

775 E Main St
Immokalee, FL 34142

Map & Hours

6785 114th Ave
Largo, FL 33773

Map & Hours

1800 US-441
Leesburg, FL 34748

Map & Hours

13295 Southern Blvd
Loxahatchee, FL 33470

Map & Hours

1945 Pine Ridge Rd
Naples, FL 34109

Map & Hours

2240 Success Dr
Odessa, FL 33556

Map & Hours

820 US-98
Okeechobee, FL 34972

Map & Hours

12049 S Orange Blossom Trail
Orlando, FL 32837

Map & Hours

906 US-301
Palmetto, FL 34221

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567

Map & Hours

6209 McIntosh Rd
Sarasota, FL 34238

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group