John Deere 6090HFC95

Feature Overview
John Deere 6090HFC95
  • 9.0L PowerTech™ PSX
  • 242 - 317 kW (325 - 425 hp)
Feature Overview
John Deere 6090HFC95
  • 9.0L PowerTech™ PSX
  • 242 - 317 kW (325 - 425 hp)
We are here to help
Features

Series turbocharger

  • Fresh air is first drawn into the low-pressure turbocharger (fixed geometry) and compressed to a higher pressure. The compressed air is then drawn into the high-pressure turbocharger (VGT), where the air is further compressed.The high-pressure air is then routed through a charge air cooler and into the engine's intake manifold.
  • By splitting the work between two turbochargers, both can operate at peak efficiency and at slower rotating speeds — lowering stress on turbocharger components and improving reliability. Series turbocharging delivers more boost pressure than single turbocharger configurations which results in higher power density, improved low-speed torque, and improved high altitude operation.

  • The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures up to 1,975 bar (29,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of injection.

  • EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing NOx.

  • These engines utilize a catalyzed exhaust filter that contains a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). The DOC reacts with exhaust gases to reduce carbon monoxide, hydrocarbons, and some particulate matter (PM). The downstream DPF traps and holds the remaining PM. Trapped particles are oxidized within the DPF through a continuous cleaning process called passive regeneration.
  • Passive regeneration occurs during normal operating conditions when heat from the exhaust stream and catalysts within the exhaust filter trigger the oxidation of the trapped PM. If passive regeneration cannot be achieved due to low temperature, load, or speed, then PM is removed using active regeneration — an automatic cleaning process controlled by the exhaust temperature management system.

  • The 4-valve cylinder head provides excellent airflow resulting in greater low-speed torque and better transient response time by utilizing a U-flow design.

  • This is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. It enables an engine to meet emissions regulations with better fuel economy and the lowest installed costs.

  • Multiple rated speeds to further reduce noise and improve fuel economy; higher level of peak torque; transient response time equal to or better than Tier 3/Stage III A; low-speed torque equal to or better than Tier 3/Stage III A

  • Lower installed cost; mounting points are the same as previous engine models

  • Faster engine control unit (ECU) manages both the engine and the exhaust filter; full authority electronic controls; four times the memory, twice the RAM and double the processing speed; the input/output capability has increased 40%

  • Gear-driven auxiliary drives
  • 500-hour oil change
  • Self-adjusting poly-vee fan drive
  • Single-piece low-friction piston
  • Directed top-liner cooling
  • Low-pressure fuel system with electrical transfer pump and "auto-prime" feature
  • Optional rear PTO

Specs
DOC/DPF Dimensions
Size 7 - Diameter - mm (in) 379 (14.9)
Size 7 - Length - mm (in) 837.8 (33.0)
Size 7 - Weight - kg (lb) 65.1 (143.5)
Size 7 - Diameter - mm (in) 379 (14.9)
Size 7 - Length - mm (in) 837.8 (33.0)
Size 7 - Weight - kg (lb) 65.1 (143.5)
Emissions Certifications
CARB  
EPA Interim Tier 4  
EU Stage III B  
General engine data
Model 6090HFC95
Number of cylinders 6
Displacement-- L (cu in) 9.0 (549)
Bore and Stroke-- mm (in) 118.4 x 136 (4.66 x 5.35)
Compression Ratio 16.0 : 1
Engine Type In-line, 4-cycle
Aspiration Turbocharged and air-to-air aftercooled
Length - mm (in) 1266.6 (49.9)
Width-- mm (in) 841.7 (33.1)
Height-- mm (in) 1344.0 (52.9)
Weight, dry - kg (lb) 1096.8 (2418)
Performance data range
Intermittent - Rated power/Rated speed 261-317 kW (350-425 hp) @2000-2200 rpm
Intermittent - Peak power 287-317 kW (385-425 hp) @1800-2200 rpm
Intermittent - Power bulge 0-10 % @1800-2000 rpm
Intermittent - Peak torque 1683-1685 N·m (1241-1243 ft-lb) @1600 rpm
Intermittent - Torque rise 22-35%
Heavy Duty - Rated power/Rated speed 260-261 kW (350 hp) @2200 rpm
Heavy Duty - Peak power 268-287 kW (359-385 hp) @1900-2000 rpm
Heavy Duty - Power bulge 2-10 % @2000 rpm
Heavy Duty - Peak torque 1563 N·m (1153 ft-lb) @1600 rpm
Heavy Duty - Torque rise 38%
Continuous - Rated power/Rated speed 242 kW (325 hp) @2000-2200 rpm
Continuous - Peak power 266-267 kW (357-358 hp) @1700-2000 rpm
Continuous - Power bulge 10 % @1800-2000 rpm
Continuous - Peak torque 1444-1590 N·m (1065-1173 ft-lb) @1600 rpm
Continuous - Torque rise 38%
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group