John Deere Raven AccuFlow™

Feature Overview
John Deere Raven AccuFlow™
  • Increases efficiency by design
  • Maximizes yield potential
  • Optional space-saver kit
  • Single, fast-valve system
Feature Overview
John Deere Raven AccuFlow™
  • Increases efficiency by design
  • Maximizes yield potential
  • Optional space-saver kit
  • Single, fast-valve system
We are here to help
Features

Complete anhydrous ammonia solution saves producers time

Raven AccuFlow© system integral to NH3 system Raven AccuFlow© system integral to NH3 system
#

The Raven AccuFlow and Raven AccuFlow Vortex© systems are integral pieces to the complete anhydrous ammonia (NH3) system.

 

Both systems provide accurate metering to the established John Deere NH3 solution—all available at John Deere.

 

The products needed for a complete anhydrous ammonia solution are all available through John Deere:

  • Nutrient applicator
  • Tractor
  • Guidance
  • Display
  • Rate control
  • Section control

Raven AccuFlow and AccuFlow Vortex are trademarks of Raven Industries Incorporated.


Everything needed to fully plumb a single section AccuFlow system is orderable through the John Deere price pages. These complete kits will improve installation and ordering efficiency. It is no longer necessary to work with a third-party supplier to fully install an anhydrous ammonia (NH3) delivery system.

 

AccuFlow Vortex offers machine-specific kits that include all the components needed to operate the  nutrient applicator, such as the Vortex cooler, mounting hardware, hoses, and GreenStar© Rate Controller harnesses. Kits are available for the following platforms.

  • 2410C kit components (assembled single vortex cooler)
  • 2510H with dry cart

Machine specific kits provide dealers with all of the hardware and harnessing to equip the 2410C or 2510H Dry with the AccuFlow© Vortex cooler minus:

  • EVA hose
  • Vapor hose
  • Nurse tank hose
  • GreenStar© Rate Controller (GRC)

 

AccuFlow Single Cooler kits are configurable to meet producers’ needs and the size and series of the 2510 Nutrient Applicator it is being installed.

 

Kit components
AccuFlow cooler:

  • Assembled dual or single cooler with space saver kit and dual valves
  • Unassembled dual or single cooler with fast valve or dual valves

Impellicone:

  • 13-port, 18-port, or two 13-port CDS-John Blue Impellicones 

Mounting, break-away coupler, and supply hose:

  • Includes mounting bracket for 2510H, 2510S, or 2510C
  • Squibb Taylor Flo-Max break-away coupler(s)
  • High-pressure supply hose ™ length is determined by machine kit

Delivery hose:

  • 9.5-mm (0.38-in.) black EPDM hose - located in attachments

Installation instructions:

  • All assembled AccuFlow kits will come with installation instructions for 2510H/S/C Nutrient Applicators

Raven AccuFlow© is a trademark of Raven Industries Incorporated.
CDS-John Blue Company name used with permission.
Squibb Taylor Incorporated and Flo-Max Coupler name used with permission.


Raven AccuFlow helps to manage input costs Raven AccuFlow helps to manage input costs
#

The Raven AccuFlow© and AccuFlow Vortex© systems allow accurate metering and application of anhydrous ammonia (NH3). Crops get the exact amount of nitrogen needed for maximum yields, while avoiding over application, enabling producers to control input costs.

 

The price of NH3 fluctuates and is more expensive than it once was. It is important for producers to manage this input cost by controlling the amount applied.

 

AccuFlow helps to ensure the correct amount of NH3 is applied to reduce over and under application of NH3. Over application of NH3 is a preventable expense, while under application of NH3 decreases crop yields.

 

Raven AccuFlow and AccuFlow Vortex are trademarks of Raven Industries Incorporated.


AccuFlow accurately applies NH3 AccuFlow accurately applies NH3

Anhydrous ammonia (NH3) is maintained in a liquid form by storing it under pressure in a nurse tank. When liquid ammonia is released from the nurse tank, there is pressure loss due to friction of the liquid flowing through the delivery hoses.

 

The reduced pressure and change in temperature allow the liquid to boil and convert a portion of the liquid into gas. The gas decreases the accuracy of the flow meter and rate controller.

 

The Raven AccuFlow© systems reduce the temperature of the NH3 to ensure it is in a liquid state at the flow meter and can be accurately metered by the rate controller. In addition The Vortex cooler alone delivers 50 gpm (60 percent increased capacity over the current single cooler and 25 percent increase over the current dual cooler system).

 

Without AccuFlow, operators would not be able to accurately apply NH3.

 

Raven AccuFlow is a trademark of Raven Industries Incorporated.


Raven AccuFlow© and AccuFlow Vortex© flow sensors enhance nutrient availability, and therefore maximize yield potential by allowing the flow meter and GreenStar© rate controller to accurately meter anhydrous ammonia (NH3). This accuracy ensures producers’ crops get the nitrogen needed to reach the maximum yield potential.

 

Many factors determine the yield producers will harvest each year. Most of these factors cannot be controlled, such as the amount of rainfall, temperature, and timeliness of rain.

 

However, other factors can be controlled by the producer to ensure the crop will reach its full potential during the growing season:

  • Nutrient availability
  • Seed selection
  • Pest prevention

Crops such as corn and wheat require the correct amount of nitrogen to reach their maximum yield potential.

 

Raven AccuFlow and AccuFlow Vortex are trademarks of Raven Industries Incorporated.


Specs
Accessories and Attachments
Raven AccuFlow

6 Section NH3 Cable 16 Pin - PF1150171838


Check Valve Assembly, Multi-Section NH3 - PF0630173030


Raven Sidekick Direct Injection System Check Valves

1 1/4" 22 GPM Check Valve - PF3330011091


3/8" Stainless Steel Check Valve (.5 PSI) - PF3330011078


*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group