The 4640 Universal Display allows you to bring your operation to the next level of efficiency through the following features:
Take advantage of the following features offered by the 4640 Universal Display:
The System tab allows the user to view and edit:
The Applications tab allows the user to view and edit:
John Deere 4640 Universal Display may be configured to run with GreenStar 3 and Gen 4 CommandCenter displays on machines approved in the machine compatibility section.
An additional extended monitor is also compatible with the 4640 Universal Display.
John Deere 4640 Universal Display subscription model provides John Deere precision ag operators more choices in how they purchase precision ag applications. This gives flexibility in selecting the level of subscription that matches the operators’ needs year by year. John Deere AutoTrac™ and documentation are included in the purchase of the display.
Two subscriptions will be available with the 4640 Universal Display + AutoTrac Activation:
Subscription-based precision ag offerings provide the following benefits:
The Gen 4 Extended Monitor provides a secondary monitor solution for those producers who want two monitors to manage their machine and precision ag applications on their 4640 Universal Display. Adding the second monitor allows producers in display-intensive operations the ability to view and adjust more of their operations at once.
Leveraging the 4640 Universal Display with Extended Monitor provides the following benefits:
This is the compatible equipment approved with the software update 19-1 release, and is subject to change with newer software updates. To ensure complete and proper compatibility, the most current version of implement control unit software, Gen 4 Display software, or compatible farm management information software (FMIS) should be used. Non-current software versions will require an update before support can be provided. Unapproved software version configurations will not be supported.
The software update 19-1 release is only compatible with 4600 CommandCenter™ v2 processors. Software update 17-2 is the last release that was compatible with 4600 v1 processors.
Server serial numbers are as follows:
John Deere Large Ag Tractors
John Deere Large Ag Tractors (list of all automatically detected machines) | Model year | CommandCenter™ display | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240 | ||
9R/9RT/9RX Series | 2018 and newer | X | --- | X | X |
9R/9RT/9RX Series | 2015 - 2017 | * | --- | X | X |
9R/9RT | 2012 - 2014 | --- | --- | X | X |
9030/9030T Series | 2008 - newer | --- | --- | X | X |
8R/8RT Series | 2018 - newer | X | --- | X | X |
8R/8RT Series | Mid-2014 - 2017 | * | --- | X | X |
8R/8RT Series | 2010 - 2013 | --- | --- | X | X |
8030/8030T Series | 2006 and newer | --- | --- | X | X |
7R Series | 2018 and newer | X | X | X | X |
7R Series | 2014 - 2017 | * | --- | X | X |
7R Series | 2012 - 2013 | --- | --- | X | X |
7J Series | 2018 and newer | --- | --- | X | X |
7030 Series | 2007 and newer | --- | --- | X | X |
7030 Series (Large Frame) | 2007 and newer | --- | --- | X | X |
6030 and 7030 Series (Small Frame) | 2006 and newer | --- | --- | X | X |
6R Series | 2018 and newer | X | X | X | X |
6R Series (Final Tier 4) | 2015 - 2017 | * | --- | X | X |
6R Series (Interim Tier 4) | 2013 - 2015 | --- | --- | X | X |
6M Series | 2013 and newer | --- | --- | X | X |
6J Series | 2018 and newer | --- | --- | X | X |
5R Series | 2019 and newer | --- | --- | X | X |
*NOTE: For latest Precision Ag functionality, update machines equipped from the factory with v1 processor to v2.
John Deere Nutrient Applicators
John Deere Nutrient Applicators | Model year | CommandCenter | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240 | ||
F4365 High-Capacity Nutrient Applicator | 2017 and newer | X | --- | --- | --- |
John Deere Self-Propelled Sprayers
John Deere self- propelled sprayers | Model year | CommandCenter | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240 | ||
4 Series Sprayers | 2018 and newer | X | --- | --- | --- |
4 Series Sprayers | 2013 - 2017 | --- | --- | X | --- |
4940 | 2012 - 2014 | --- | --- | X | --- |
4630 | 2008 and newer | --- | --- | X | --- |
4730 | 2008 and newer | --- | --- | X | --- |
4830 | 2008 - 2014 | --- | --- | X | --- |
4930 | 2008 - 2013 (SN 4000+) | --- | --- | X | --- |
R4040i | 2019 and newer | --- | --- | X | --- |
R4050i | 2019 and newer | --- | --- | X | --- |
Hagie™ sprayers | 2014 and newer | Compatible with GreenStar™ 3 2630 Displays and 4640 Universal Displays* |
*NOTE: When using the 4640 Universal Display on a Hagie Sprayer, additional mounting and harnessing may be required. Current John Deere/Hagie field kits only offer GreenStar 3 2630 Display parts.
John Deere Self-Propelled Forage Harvesters (SPFH)
John Deere Self-Propelled | Model year | CommandCenter | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240 | ||
9000 Series SPFH | 2019 and newer | --- | --- | X | --- |
8000 Series SPFH | 2015 and newer | --- | --- | X | --- |
John Deere planters
SeedStar™ 4HP planters are only compatible with 4600 CommandCenter displays with a version 2 (v2) processor and 4640 Universal Displays. Displays should be running Gen 4 OS software version 10.10.404-390 or newer and the most current version of tractor applications to be compatible with SeedStar 4HP planter applications. Additionally, dual-display mode is not available for use with SeedStar 4HP planter applications, along with Gen 4 Extended Monitor.
The SeedStar 2 configuration below is available only on factory-installed model year 2011 and newer planters and may be field-installed on model year 2009 and 2010 planters. Green PM/PA controllers (factory-installed on model year 2009 and 2010 planters) are not supported with a Gen 4 display.
For John Deere dealers: the Service ADVISOR™ tool is needed to update SeedStar 2, SeedStar XP, and SeedStar 3 HP software. Documentation is not supported when using a rate controller to control row clutches on a John Deere planter.
John Deere planters | Control unit name | Software version (or newer) | CommandCenter display | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240* | |||
SeedStar 2 | Black PM1 | 22.0 | X | X | X | X |
Black PA1, (if available PA 2) | 22.0 | X | X | X | X | |
Green PM1 | 10.11 | --- | --- | --- | --- | |
Green PA1 (if available PA 2) | 10.11 | --- | --- | --- | --- | |
SeedStar XP | Black PM1 | 22.0 | X | X | X | X |
Black PA1, (if available PA 2) | 22.0 | X | X | X | X | |
PM2 | 7.0 | X | X | X | X | |
SeedStar 3 HP | Planter Main A (PCMA) | 5.0 | X | X | X | X |
Planter Main B (PCMB or MMC) | 8.0 | X | X | X | X | |
Row-unit Controller (RUC) | 2.0 | X | X | X | X | |
EPG | 3.0 | X | X | X | X | |
SeedStar 4HP | Planter Apps | 10.3.14-14 | X | --- | X | --- |
Planter Main A (PCMA) | 4.0 | X | --- | X | --- | |
Planter Main B (PCMB or MMC) | 4.0 | X | --- | X | --- | |
Row-unit Controller (RUC) | 2.0 | X | --- | X | --- | |
Electrical Power Generation (EPG) | 3.0 | X | --- | X | --- | |
Electrical Power Module, 2 (PC2) | 2.0 | X | --- | X | --- |
*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 Radar speed kit.
John Deere Air Seeders
The C850 Air Cart requires a 4600/4200 CommandCenter Display or a 4640/4240 Universal Display. GreenStar 3 2630 monitors are not supported. Additionally, C850 Air Carts and AutoTrac Implement Guidance (passive) are compatible with software update 18-2 and newer.
John Deere Air Seeder | Model year/control unit name | Software version (or newer) | CommandCenter | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240* | |||
C850 Air Cart | Cart Master Controller (CMC) | 12 | X | X | X | X |
Mini Tank Controller (TXC) | 6 | X | X | X | X | |
Front, Middle, Rear Tank Controller (TCU) | 6 | X | X | X | X | |
1870 Seeding Tool - TruSet™ system | 2017 and newer (IDC) | 5.0 | X | X | X | X |
1870 Seeding Tool - RelativeFlow™ blockage sensors | 2017 and newer (BMU) | 4.0 | X | X | X | X |
1910 Air Cart - ground drive | 2009 and newer | 3.0 | X | X | X | X |
1910 Air Cart - hydraulic drive | 2013 and newer | 8.00 | X | X | X | X |
Seeding tools with air-run blockage - primary blockage | 2009 and newer (BMU) | 12.0 | X | X | X | X |
Seeding tools with air-run blockage - air-run blockage | 2009 and newer (BMU) | 12.0 | X | X | X | X |
Member Module | 5.0 | X | X | X | X | |
1990 Central Commodity System (CCS™) | 2009 and newer (BMU) | 12.0 | X | X | X | X |
N500C Series | SMCA or SMC | 2.0 | X | --- | X | --- |
SMCB or BMU | 2.0 | X | --- | X | --- | |
EPG | 2.0 | X | --- | X | --- |
*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 Radar speed kit.
John Deere Tillage
John Deere Tillage | Control unit name | Software version (or newer) | CommandCenter | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240 | |||
AccuDepth™ cultivator | Implement Depth Control (IDC) | 11 | X | X | X | X |
2730 with TruSet | Tillage Controller 1 (TC1) | 1.65H8 | X | X | X | X |
2230 with TruSet | Tillage Controller 1 (TC1) | 2.74J7 | X | X | X | X |
2330 with TruSet | Tillage Controller 1 (TC1) | 2.34J7 | X | X | X | X |
2620/2630 with TruSet | Tillage Controller 1 (TC1) | 2.94J7 | X | X | X | X |
2720 with TruSet | Tillage Controller 1 (TC1) | 1.22H7 | X | X | X | X |
2660VT with TruSet | Tillage Controller 1 (TC1) | 1.01J8 | X | X | X | X |
*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 Radar speed kit.
John Deere Round Balers
John Deere Round Balers | Control unit name | Software version (or newer) | CommandCenter | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240 | |||
0 Series | Baler Automation | 10.07 | X | X | X | X |
9 Series Premium | Baler Automation | 7.16 | X | X | X | X |
V451R/V461R | Baler Automation | 11.5 | X | X | X | X |
John Deere Large Square Balers
John Deere Large Square Balers Including Harvest Tec applicator and PhiBer accumulator | Control unit name | Software version (or newer) | CommandCenter | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240 | |||
0 Series | Gen 4 VT | 3.04 | X | X | X | X |
1 Series | Gen 4 VT | 5.07 | X | X | X | X |
John Deere combines
John Deere combines | Model year | CommandCenter | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240 | ||
S700 Series | 2018 and newer | X | --- | --- | --- |
S430 and S440 | 2017 and newer | X | --- | --- | --- |
S600 Series | 2012 - 2017 | --- | --- | X | X |
S540 and S550 Series | 2012 and newer | --- | --- | X | X |
T-Series | 2012 and current | --- | --- | X | X |
W-Series | 2012 and current | --- | --- | X | X |
70 Series* | 2008 - 2013 | --- | --- | X | X |
*NOTE: If using 4640 Universal Display, AutoTrac RowSense on a 70-Series Combine is not compatible.
NOTE: Competitive equipment may be compatible with 4640 Universal Display and 4240 Universal Display. For additional compatibility information, see AutoTrac Universal 200, AutoTrac Universal 300, or AutoTrac Controller in the Ag Sales Manual.
John Deere control units | Control unit name | Software version (or newer) | CommandCenter display | Universal Display | ||
4600 v2 | 4200 | 4640 | 4240 | |||
*StarFire 6000 Receiver | --- | 4.10J | X | X | X | X |
StarFire 3000 Receiver | --- | 2.32H | X | X | X | X |
*Modular Telematics Gateways (MTG) - 3G | --- | 21.03 | X | X | X | X |
*MTG - 4G | --- | 24.01 | X | X | X | X |
GreenStar Rate Controller | --- | 3.60F | X | X | X | X |
GreenStar Rate Controller Dry | --- | 2.11A | X | X | X | X |
*John Deere Rate Controller 2000 | --- | 1.12C | X | X | X | X |
*AutoTrac Universal 200 | --- | 2.30A | --- | --- | X | X |
*AutoTrac Universal 300 | --- | 3.22O | --- | --- | X | X |
AutoTrac Controller 250 | --- | 11933B | --- | --- | X | X |
*AutoTrac Controller - Deere | --- | 1.11B | --- | --- | X | X |
AutoTrac Controller - Raven | --- | 3.2.29 | --- | --- | X | X |
AutoTrac Controller - Reichhardt® | --- | SW 1.3 | --- | --- | X | X |
AutoTrac RowSense™ | RG3 | AKK15783E | X | --- | X | --- |
AutoTrac Vision | VGC | 4.01L | X | --- | X | --- |
AutoTrac Turn Automation | --- | 18-1 (FT4 iTEC tractors) | X | --- | X | --- |
AutoTrac Implement Guidance | --- | 18-1 | X | --- | X | --- |
Active Implement Guidance (VT) | Application 1100 | 2.71 T | X | --- | X | --- |
iGrade™ | Application 1100 | 2.71 T | X | --- | X | --- |
Distance Trip | Application 1100 | 2.71 T | X | --- | X | --- |
Gen 4 Extended Monitor | X | --- | X | --- | ||
Wireless Data Server | Wireless Data Server | 1.484.1 (Planting | X | --- | --- | --- |
Mobile Data Transfer | MyTransfer™ App | 3.8.6 (iOS) | X | X | X | X |
Connect Mobile app | Connect Mobile App | 6.0.0 or newer | X | --- | --- | --- |
Connect Mobile server | Connect Mobile server | 5.2.57-5 | X | --- | --- | --- |
Mobile Weather | Application 1120 | 1.51 V | X | --- | X | --- |
*NOTE: See additional information below.
StarFire Receivers
StarFire Receivers can be updated in the following ways:
Additionally, StarFire iTC Receivers are no longer supported with software update 2017-1 and newer software. StarFire 6000 Receivers require software version 3.80F or higher when used with AutoTrac Implement Guidance.
John Deere Operations Center
Gen 4 data is only compatible with the John Deere Operations Center.
Activations/subscriptions required for Wireless Data Transfer (WDT) and Data Sync:
To use RDA on a Gen 4 CommandCenter Display with a GS3 2630 Display connected in the same machine, GS3 2630 software version 3.22.1095 (SU2014-1) or higher is required (for 4600 CommandCenter Display and 4640 Universal Display only).
GreenStar Rate Controller and GreenStar Rate Controller Dry
GreenStar Rate Controller Dry is supported with display software update 2017-2 and newer. The 4600 and 4200 CommandCenter Displays and 4640 and 4240 Universal Displays support documentation and section control of up to five GreenStar Rate Controller units.
To update the GreenStar Rate Controller and GreenStar Rate Controller Dry, utilize a Gen 4 Display USB port. John Deere dealers can also utilize Service ADVISOR™. GDC 2.11A was the last software version available through Software Manager. GDC 2.20A has been available since spring 2015 and contains diagnostic language updates. This software can only be obtained through Service ADVISOR.
John Deere Rate Controller 2000
The Gen 4 Displays and John Deere Rate Controller 2000 can support documentation and control up to five operations. ISO controllers such as SeedStar on John Deere planters can be used with a John Deere Rate Controller 2000 that is documenting additional operations. Additionally, Gen 4 Displays can document shared sections with a John Deere Rate Controller 2000. An example of this would be John Deere Rate Controller 2000 used with a Raven Sidekick™ ICD direct injection pump.
For more information on Gen 4 displays and John Deere Rate Controller 2000 compatibility, please visit the John Deere Ag Sales Manual.
AutoTrac™ Vision
AutoTrac Vision Guidance Camera 19-1 software 4.01L is only compatible with RowGuidance 3 Controller software AKK15783F and GreenStar 3 2630 17-1 software 3.34.1345 or newer and Generation 4 18-1 software 10.10.404-345 or newer.
AutoTrac Universal 200, AutoTrac Universal 300, and AutoTrac Controller
AutoTrac Universal 200, AutoTrac Universal 300, and AutoTrac Controllers are for use with the 4640 Universal Display and 4240 Universal Display. Please see the AutoTrac Universal 200, AutoTrac Universal 300, or AutoTrac Controller Sales Manual for exact model compatibility.
ISOBUS implements
Gen 4 Displays are compatible with one Agricultural Industry Electronics Foundation (AEF) certified ISOBUS implement; AEF-certified ISOBUS implements with Task Controller Section Control (TC-SC) functionality and AEF certification for TC-SC include sprayers, fertilizer spreaders, planters, seeders, manure applicators, etc. For third-party FMIS compatibility, reference the John Deere Operations Center.
A software update performed by an authorized ISOBUS implement dealer may be required to obtain compatible software. ISOBUS implements must be certified through the Agricultural Industry Electronics Foundation (AEF) to be recognized by the Gen 4 CommandCenter display. Visit www.aef-online.org for more information; visit www.aef-isobus-database.org for an active list of compatible implements.
ISOBUS implements with VT4 are now supported by Gen 4 Displays. Gen 4 Displays still support older VT versions (example: VT2 and VT3). If an implement is not loading after updating to Gen 4 software update 2017-2 (or newer on 4600 CommandCenter v2 processors), it is recommended that the implement manufacturer be contacted to get a software version that is either VT3 or VT4.
Extended monitor
When using an extended monitor with equipment visualized in ISOBUS VT Viewer and applying VT run page modules to two run pages shown at the same time, the extended monitor’s VT modules will not update. To mitigate this, only view VT modules on one run page at a time.
Connect Mobile
For complete Connect Mobile compatibility, please reference Connect Mobile configurations.
Implements without controllers
Implements without controllers can be documented as a stand-alone operation or with a rate controller from John Deere. Additionally, multiple implements without controllers cannot be documented together.
AutoTrac Implement Guidance (passive)
AutoTrac Implement Guidance is compatible with SeedStar 3HP, SeedStar 2 and SeedStar XP.
AutoTrac Implement Guidance is compatible with C850 Tow-Behind Air Carts with software update 18-2.
AutoTrac Implement Guidance is not compatible with the SeedStar 4 HP planters for spring of 2019.
AutoTrac Turn Automation
To use the AutoTrac Turn Automation application, specific compatibility is required. AutoTrac Turn Automation is compatible with the following machines:
NOTE: Integrated tractor IMS must be turned off on 30-Series Tractors to use AutoTrac Turn Automation on the Gen 4. Integrated Tractor iTEC must be turned off on the following tractors to use AutoTrac Turn Automation on the Gen 4:
NOTE: If instead an operator chooses to use the machine’s integrated IMS/iTEC functionality, then AutoTrac Turn Automation and iTEC must be turned off in the Gen 4 Universal Display.
AutoTrac Turn Automation is compatible with SeedStar 3HP, SeedStar 2 and SeedStar XP.
AutoTrac Turn Automation is NOT compatible with SeedStar 4HP planters for spring of 2019
Camera compatibility
Voyager® cameras are supported on Gen 4 Displays. All other camera types are not supported.
Non-John Deere Precision Ag
4600 CommandCenter v2 and the 4640 Universal Display are compatible with the following RS-232 configurations with software update 18-2 and newer:
Machine Communication Radio (MCR)
Gen 4 displays are not compatible with MCR.
APEX™ software
NOTE: Gen 4 data is only compatible with the John Deere Operations Center. All Gen 4 activations are machine specific and cannot be transferred to a different machine. If not using WDT, an 8- to 32-GB USB is required to transfer data to and from the Gen 4 Display. Implement settings are display specific and cannot be imported or exported from the Gen 4 Display.
RAM is a trademark of National Products Inc. Hagie is a trademark of Hagie Manufacturing Company, LLC and similar to John Deere branded equipment, John Deere will support Hagie equipment. Reichhardt is a trademark of Reichhardt GmbH Steuerungstechnik. Sidekick is a trademark of Raven Industries, Inc. Voyager is a trademark of ASA Electronics, LLC.
The ability to remotely view the machine’s settings, performance, yield, acres, and other information is highly valuable when managing or supervising an operation. It is imperative that the operator’s equipment keeps running productively and that the grower or dealer is enabled to provide remote support to improve the quality and efficiency of work while saving time and money. RDA enables an operator to get help with machine settings or identify a problem and receive assistance in navigating through the steps needed to resolve the issue.
Value in brief:
Dual-display connection capability
Dual-display connection allows both the GreenStar 3 2630 Display/4640, and 4240 Universal Display and Generation 4 CommandCenter Displays to be viewed during one RDA session. The user simply toggles between the tabs in the browser or in a mobile device. View exactly what the operator sees on the GreenStar 3 2630 Display, 4640 and 4240 Universal Display, and Generation 4 CommandCenter from almost any internet-connected device. RDA is available on both the 4600 and 4200/4100 CommandCenter Displays. RDA enables quick communication around settings or messages on the displays. This allows improved communication between the equipment operator in the field and an offsite farm manager or dealer to help with machine settings, quick remote training, support, or any other needs that may arise in the field.
RDA provides the following benefits to the users:
Performance
Uptime
Cost of operation
Requirements:
Functionality:
iOS is a trademark of Cisco Technology, Inc. used under license by Apple, Inc. Android is a trademark of Google LLC.
John Deere Wireless Data Transfer (WDT) helps producers save time, money, and increase productivity through telematics-enabled data transfer via JDLink™ Connect wireless telematics. Wirelessly transfer setup, prescription, and documentation files securely between office, mobile devices, and 4640/4240 Universal Display or 4600/4200 CommandCenter™ Display, eliminating the need for USB transfer. This increases producer uptime and productivity, reducing the risk of data loss, and enabling easy data sharing and more timely decision making.
Through the John Deere Operations Center, producers are in control and can easily share files with a John Deere dealer and other trusted advisers.
With WDT, producers can manually send data wirelessly to the John Deere Operations Center; data is available to review in Files and then later in Field Analyzer and the MyOperations™ mobile app. To enable WDT on a Gen 4 Display, producers must manually navigate to the Menu, System, File Manager, Export and then begin selecting the data they want to send to the John Deere Operations Center.
NOTE: WDT on a Gen 4 Display does not include any auto send triggers similar to the GreenStar™ 3 2630 Display which automatically sent data after a change in client, farm or field.
Set-up files and prescriptions can be transferred wirelessly from the Operations Center to the 4600/4200 CommandCenter or 4640/4240 Universal Display anytime, eliminating trips to the machines’ locations and allowing for more timely completion of field operations. Modified setup files and prescriptions will not overwrite files currently on the Gen 4 Display; only new or modified information will be imported from the setup file.
Data Sync automatically sends documentation data to John Deere Operations Center every 30 seconds. Producers have the opportunity to analyze data from completed fields or view where field work is in process, making it easier for producers to make operational decisions. Data is available to analyze from any internet-connected device to make important production decisions and give operations the ability to invoice work recently completed. There are triggers that make the data available within the John Deere Operations Center including: after a field has been completed, after new work has started, or a half hour after field work has been stopped.
The Generation 4 CommandCenter™ and Gen 4 Universal Displays display are an AEF ISOBUS compatible display.
An easy plug and play between implements, displays, tractors, and other products is required today in daily business. This is why within agriculture and forestry, an industry standard, ISOBUS, is used for communication between these products.
From the ag industry, the Agricultural Industry Electronics Foundation (AEF) was initiated in 2008 to have a common forum among manufacturers to define the ISOBUS standard further, define and conduct ISOBUS tests, accelerate adoption, label compatible products, and to communicate this to dealers and customers. John Deere is one of the seven founding members of AEF and is very engaged in the organization.
To better ensure ISOBUS compatibility, the AEF developed new functionalities, i.e., auxiliaries (AUX) and Task Controller Section Control (TC-SC,) in addition to the well-known universal terminal (UT). They are also the basis for the certification of ISOBUS products. An ISOBUS functionality can be described as an independent ISOBUS product and the concept is extendable for later additions of functionalities.
Gen 4 CommandCenter and Gen 4 Universal Displays support the following ISOBUS features:
To stay up to speed on which implement and product complies with which ISOBUS features, please visit the AEF website and sign up for the database. It combines tractor, sprayer, and display combination to determine compatibility.
Documentation of implement-based field operations remains important regardless of controller brand. The 4600 CommandCenter™ Display and 4640 Universal Display can communicate with select third-party controllers and third-party global positioning systems (GPS). Collectively, the system supplies the operator with instantaneous data while viewing the display. This information can be viewed in the John Deere Operations Center software for further analysis and reporting.
Third-party RS232 GPS compatibility enables documentation and Section Control on the 4600 CommandCenter and 4640 Universal Display; AutoTrac™ functionality is not compatible with third-party RS232 GPS.
When using a Raven controller, the Gen 4 display can run in conjunction with map-based prescriptions.
Collected data may include:
Compatible controllers:
Compatible GPS:
Required components:
SCS 440, SCS 450, and SCS 660M are trademarks of Raven Industries, Inc.
In order to utilize over-the-air controller reprogramming, software update 18-1 needs to download in the background:
Once software update 18-1 is installed, users are able to reprogram precision farming controllers (AMS controllers) over the air:
Precision farming Ethernet reprogramming
Precision farming devices are attachable components (such as the StarFire 6000 Receiver, GreenStar Rate Controller, and AutoTrac Universal steering system) that complete or extend a producer’s precision farming solutions.
Producers have the power to reprogram every* AMS component connected to their vehicle, over the air, without the need for a USB stick or separate download program:
Over-the-air reprogramming allows for fast, simple, and convenient updates that offer improved performance and new features when producer’s need them, when they want them, and when they are ready for them.
*NOTE: Other AMS displays (such as the Original GreenStar Display, GreenStar 2 1800, GreenStar 2 2600, and GreenStar 3 2630) cannot be reprogrammed by the Gen 4 display. Modular Telematics Gateway and non-AMS components, such as the tractor radio, are not updateable by the Gen 4 display.
Ensure the Gen 4 display is connected to one of the following:
The Gen 4 display’s internet connection status can be review from Status Center or the Wireless Settings application.
Ensure the Gen 4 display is connected to the precision farming device that is to be reprogrammed. The Gen 4 display’s connection status to the precision farming device can be reviewed by looking for the device in the ISOBUS VT application or in the Diagnostics Center application.
Mac is a trademark of Apple Inc.
Producers have asked for a way to better secure their John Deere devices from improper use and thefts. With the 19-1 software update, John Deere added an enhancement to the user interface of the Gen 4 4240 and 4640 Universal Displays.
With this solution, producers have the choice to enable the security PIN code feature and set up a unique four-digit PIN code to enable and unlock their device, similar to a mobile device. Enabling this code will allow only users with the defined PIN code to access the device when it powers on.
This feature has two levels of access that can be defined. An administrator PIN code must be defined to enable the feature and should be used by the farm manager. A second optional operator PIN code can be defined for usage by operators of the machine.
PIN code level | Functions | Main user |
Administrator PIN code |
| Farm manager |
Operator PIN code |
| Operator |
Master unlock code |
| Farm manager |
John Deere Wireless Data Transfer (WDT) helps producers save time, money, and increase productivity through telematics-enabled data transfer via JDLink™ Connect wireless telematics. Wirelessly transfer setup, prescription, and documentation files securely between office, mobile devices, and 4640/4240 Universal Display or 4600/4200 CommandCenter™ Display, eliminating the need for USB transfer. This increases producer uptime and productivity, reducing the risk of data loss, and enabling easy data sharing and more timely decision making.
Through the John Deere Operations Center, producers are in control and can easily share files with a John Deere dealer and other trusted advisers.
With WDT, producers can manually send data wirelessly to the John Deere Operations Center; data is available to review in Files and then later in Field Analyzer and the MyOperations™ mobile app. To enable WDT on a Gen 4 Display, producers must manually navigate to the Menu, System, File Manager, Export and then begin selecting the data they want to send to the John Deere Operations Center.
NOTE: WDT on a Gen 4 Display does not include any auto send triggers similar to the GreenStar™ 3 2630 Display which automatically sent data after a change in client, farm or field.
Set-up files and prescriptions can be transferred wirelessly from the Operations Center to the 4600/4200 CommandCenter or 4640/4240 Universal Display anytime, eliminating trips to the machines’ locations and allowing for more timely completion of field operations. Modified setup files and prescriptions will not overwrite files currently on the Gen 4 Display; only new or modified information will be imported from the setup file.
Data Sync automatically sends documentation data to John Deere Operations Center every 30 seconds. Producers have the opportunity to analyze data from completed fields or view where field work is in process, making it easier for producers to make operational decisions. Data is available to analyze from any internet-connected device to make important production decisions and give operations the ability to invoice work recently completed. There are triggers that make the data available within the John Deere Operations Center including: after a field has been completed, after new work has started, or a half hour after field work has been stopped.
Over-the-air activations were enabled with the 18-1 software update to the Gen 4 displays. With that software update or newer, a John Deere dealer can send activations to a Gen 4 display without leaving the office. Over-the-air activations also eliminate the need to manually enter long activation codes like was done previously. This also eliminates multiple trips between the cab and the farm office to enter codes and verify completion.
NOTE: Over-the-air activations requires a current JDLink™ Connect subscription and Mobile Telematics Gateway (MTG). Planter and platform activations and subscriptions cannot be updated over-the-air.
The ability to remotely view the machine’s settings, performance, yield, acres, and other information is highly valuable when managing or supervising an operation. It is imperative that your equipment keeps running productively and that you are enabled to provide remote support to improve the quality and efficiency of work while saving time and money. RDA enables you to get help with machine settings or identify a problem and receive assistance in navigating through the steps needed to resolve the issue.
Value of RDA:
Gen 4 applications and subscriptions allow data to be transferred from the display to the John Deere Operations Center for job reporting and analysis using Wireless Data Transfer (WDT) or Data Sync.
Wirelessly sending data helps you save time and money while increasing productivity. Wirelessly transfer setup, prescription, and documentation files securely between office, mobile devices, and 4640/4240 Universal Display or 4600/4200 CommandCenter™ Display, eliminating the need for USB transfer. This increases your uptime and productivity, reduces the risk of data loss, and enables easy data sharing and more timely decision making.
Through the John Deere Operations Center, you are in control and can easily share files with a John Deere dealer and other trusted advisers.
NOTE: For users in areas of poor cellular coverage, data is able to be exported using a USB flash drive.
Documentation of implement-based field operations remains important regardless of controller brand. The 4600 CommandCenter™ Display and 4640 Universal Display can communicate with select third-party controllers and third-party global positioning systems (GPS). Collectively, the system supplies the operator with instantaneous data while viewing the display. This information can be viewed in the John Deere Operations Center software for further analysis and reporting.
Third-party RS232 GPS compatibility enables documentation and Section Control on the 4600 CommandCenter and 4640 Universal Display; AutoTrac™ guidance functionality is not compatible with third-party RS232 GPS.
When using a Raven controller, the Gen 4 display can run in conjunction with map-based prescriptions.
Collected data may include:
Compatible controllers:
Compatible GPS:
Required components:
SCS 440, SCS 450, and SCS 660M are trademarks of Raven Industries, Inc.
Over-the-air reprogramming allows for fast, simple, and convenient updates that offer improved performance and new features when producer’s need them, when they want them, and when they are ready for them.
Precision farming devices are attachable components (such as the StarFire™ 6000 Receiver, GreenStar™ Rate Controller, and AutoTrac™ Universal steering system) that complete or extend a producer’s precision farming solutions.
You have the power to reprogram every* Precision Ag Technology component connected to your vehicle, over the air, without the need for a USB stick or separate download program:
*NOTE: Other Precision Ag Technology displays (such as the Original GreenStar Display, GreenStar 2 1800, GreenStar 2 2600, and GreenStar 3 2630) cannot be reprogrammed by the Gen 4 display. Modular Telematics Gateway and non-Precision Ag Technology components, such as the tractor radio, are not updateable by the Gen 4 display.
Mac is a trademark of Apple Inc.
Producers have asked for a way to better secure their John Deere devices from improper use and thefts. With the 19-1 software update, John Deere added an enhancement to the user interface of the Gen 4 4240 and 4640 Universal Displays.
With this solution, producers have the choice to enable the security PIN code feature and set up a unique four-digit PIN code to enable and unlock their device, similar to a mobile device. Enabling this code will allow only users with the defined PIN code to access the device when it powers on.
This feature has two levels of access that can be defined. An administrator PIN code must be defined to enable the feature and should be used by the farm manager. A second optional operator PIN code can be defined for usage by operators of the machine.
PIN code level | Functions | Main user |
Administrator PIN code |
| Farm manager |
Operator PIN code |
| Operator |
Master unlock code |
| Farm manager |