John Deere MX7

Feature Overview
John Deere MX7
  • Standard stump jumper blade holder
  • Smooth, easy-clean, dome-shaped top deck
  • Front and rear safety chain shields are standard
  • 5-year limited gearbox warranty
Feature Overview
John Deere MX7
  • Standard stump jumper blade holder
  • Smooth, easy-clean, dome-shaped top deck
  • Front and rear safety chain shields are standard
  • 5-year limited gearbox warranty
We are here to help
Features

Which rotary cutter is right?

John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features are included such as the Double-Decker™ design and Max Flow cutting chamber, which prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps.

 

The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.

 

To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with larger, more powerful gearboxes, redesigned blade holders, and updated constant-velocity (CV) drivelines (special to the flex-wing models).

 

Here are situations when a rotary cutter is needed:

  • Clipping pastures encourages grass growth, optimizing on valuable pasture acreage.
  • Cutting grass and stocks helps control insects.
  • Routine cutting keeps weeds from reseeding.
  • It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
  • Cutting grass waterways encourages root development and helps prevent erosion.
  • Knocking down stalks is essential in no-till and minimum-till fields.
  • Shredding stalks such as cotton, corn, and milo speeds up decomposition.
  • Clearing out brush is easy.
  • Use a rotary cutter to control undergrowth and grass in orchards, vineyards, and groves.

John Deere rotary cutters are available in three duty-level categories, three different spindle configurations, four hitch types, and three flex-wing sizes.

  • Mid-duty
    • MX models are available in 1.5-m (5-ft), 1.8-m (6-ft), 2.1-m (7-ft), 2.5-m (8-ft), 3.2-m (10-ft), and 4.6-m (15-ft) cut widths.
    • This duty-level category cuts brush up to 50.8 mm (2 in.) in diameter.
  • Heavy-duty
    • HX models are available in 3.2-m (10-ft), 4.2-m (14-ft), 4.6-m (15-ft), and 6.1-m (20-ft) cut widths.
    • HX6 is available in 1.8-m (6-ft) and the HX7 is available in 2.1-m (7-ft) cut widths; they cut brush up to 101.6 mm (4 in.) in diameter.
  • Commercial-duty
    • CX models are available in 3.2-m (10-ft), 4.6-m (15-ft), and 6.1-m (20 ft) cut widths; they cut brush 101.6 mm (4 in.) in diameter.

 

NOTE: CX models are heavier built to cut at a 101.6mm (4 in.) capacity level more frequently and for longer durations.


Suction blade (standard equipment) Suction blade (standard equipment)

Suction blades provide additional lift action for picking up downed material. The blades are 1.3 cm x 10.2 cm (0.5 in. x 4 in.) in size and heat-treated for long wear life.

 

The fast blade-tip speed ensures clean cutting and fine shredding of material.

  • Up to 88.5 m/sec (17416 fpm)

Front safety chains (MX6 shown) Front safety chains (MX6 shown)
Rear safety chains (MX6 shown) Rear safety chains (MX6 shown)

Front and rear chain shields are standard equipment:

  • Offer protection for the operator yet allow uncut material to pass into the cutting chamber with minimal restriction

Five-year warranty on all flex-wing gearboxesFive-year warranty on all flex-wing gearboxes
Five-year warranty on all rotary cutter gearboxesFive-year warranty on all rotary cutter gearboxes

John Deere is so confident in the reliability of the gearbox, the warranty has been extended. John Deere rotary cutters come with a 5-year limited gearbox warranty.


NOTE: Only for single spindle and multi-spindle.

 

John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features such as the Double-Decker© design and Max Flow cutting chamber prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps.

 

The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.

 

To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with powerful gearboxes, blade holders, and compatibility with a wide range of tractors.

 

Here are situations when a rotary cutter provides value:

  • Clipping pastures encourages grass growth, optimizing valuable pasture acreage.
  • Cutting grass and stalks helps control insects.
  • Routine cutting keeps weeds from reseeding.
  • It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
  • Cutting grass waterways encourages root development and helps prevent erosion.
  • Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
  • Clearing out brush.
  • Control undergrowth and grass in orchards, vineyards, and groves.

Decide what model to use based on:

  • The size of the area to mow versus the size of the machine ™ the bigger the area to mow, the bigger the mower needs to be in order to be efficient during mowing hours. Similarly, the limitation of a small area will guide operators to use a smaller mower.
  • The amount of time and frequency it will be used ™ for longer hours and more frequency, choose a heavier duty machine.
  • Tractor compatibility ™ if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.

John Deere rotary cutters are available in two duty-level categories:

  • Mid-duty
    • MX models are available in 1.5-m (5-ft), 1.8-m (6-ft), 2.1-m (7-ft), 2.5-m (8-ft), and 3.2-m (10-ft).
    • This duty-level category cuts brush up to 50.8 mm (2 in.) in diameter.
  • Heavy-duty
    • HX models are available in 3.2-m (10-ft) and 4.2-m (14-ft).
    • This duty-level category cuts brush up to 76.2 mm (3 in.) in diameter.
    • HX6 is available in 1.8-m (6-ft) and the HX7 is available in 2.1-m (7-ft) cut widths; they cut brush up to 101.6 mm (4 in.) in diameter.

NOTE: HX models are heavier built to cut at a 101.6 mm (4 in.) capacity level more frequently and for longer durations.


Five-year limited gearbox warranty provided on every John Deere rotary cutter
Five-year warranty on all flex-wing gearboxes Five-year warranty on all flex-wing gearboxes
Five-year warranty on all rotary cutter gearboxes Five-year warranty on all rotary cutter gearboxes

John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.

 

There is also 1-year warranty on the complete machine, as well as drivelines and other components.


Specs
Blades
Thickness 13 mm
0.5 in.
Width 102 mm
4 in.
Blade tip speed 540 RPM
4,932 m/min
16,182 fpm
296 km/h
184 mph
Material flow system Max flow
Holder Type
Round stump jumper
Capacity
Cutting width 2,130 mm
84 in.
Cutting height 25 to 241 mm
1 to 9.5 in.
Cutting capacity 50 mm
2 in.
Cutting chamber Depth 216 mm
8.5 in.
Dimensions
Transport width 2,242 mm
88 in.
Overall width 2,242 mm
88 in.
Overall length 3,210 mm
126 in.
Deck shape Domed
Deck type Double decker
Deck thickness Upper
3.5 (10) mm
0.138 (10) in.
Lower
3.5 (10) mm
0.138 (10) in.
Side skirt thickness 6 (3) mm
0.25 (3) in.
Approx. weight 605 kg
1,332 lb
Drivelines
Size Main
ASAE Category 4
Protection Main
Slip-clutch driveline
Gearcases
Number 1
HP rating
Center
Continuous 56 kW
75 hp
Peak 75 kW
100 hp
Hitch
Category 2, 3N
Shielding
Front Chain
Rear Chain
Tractor compatibility
Tractor PTO HP range Minimum 30 kW
40 hp
Tractor PTO 540 rpm
Wheels
Type Puncture proof laminated (optional dual tail wheels)
Accessories and Attachments
Miscellaneous

Cat. II Hitch Pin - W46503


Skid Shoe (weld on) - W46345


Safety shields are used to reduce the hazard of thrown material.
 
Front chain shields protect the operator, yet still allow uncut material to pass into the cutting chamber with minimal restriction.
 
Front and rear shields are to be used at all times. They are especially critical when working near roads or other public areas. 

Front chain shieldsFront chain shields
Rear chain shieldsRear chain shields
 

Safety shields are used to reduce the hazard of thrown material.
 
Front chain shields protect the operator, yet still allow uncut material to pass into the cutting chamber with minimal restriction.
 
Front and rear shields are to be used at all times. They are especially critical when working near roads or other public areas. 

Front chain shieldsFront chain shields
Rear chain shieldsRear chain shields
 

4 X 8 Bolt Wheel Hub - Puncture Proof Laminated Tire - AW30715


Dual Tail Wheel Support and Hub - AW30473


*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
Sarasota

6209 McIntosh Rd
Sarasota, FL 34238
941-924-9709

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group