|Plowing depth||35.6 cm / 14 in.|
|Horsepower required - Option 1||5-bottom: 96.9-123 kW / 130-165 hp|
The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.
The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.
All 995 Moldboard Plows use only one set of bottoms.
The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:
The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:
The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.
Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:
|Plowing depth||35.6 cm
|Horsepower required - Option 1||5-bottom: 96.9-123 kW
|Type||Category 3N or 3|
|Reversible||Type of reversing
|Option 1||5-bottom: 96.9-123 kW
|Option 2||6-bottom: 111.9-130.5 kW
|Option 3||7-bottom: 130.5-149.1 kW
|Option 4||8-bottom: 149.1-186.4 kW