John Deere 913

Feature Overview
John Deere 913
  • Adjustable standard spacing prevents side movement
  • V-pattern frame promotes leading-edge shattering
  • LaserRip™ Extreme points
  • Heavy-duty steel ripper points
Working width Option 1: 2.5 m / 8.33 ft / Option 2: 3.2 m / 10.42 ft / Option 3: 3.8 m / 12.5 ft
Transport width Option 1: 2.1 m / 7 ft / Option 2: 2.1 m / Option 3: 2.1 m
Operating depth Maximum / 58.4 cm / 23 in. /
Feature Overview
John Deere 913
  • Adjustable standard spacing prevents side movement
  • V-pattern frame promotes leading-edge shattering
  • LaserRip™ Extreme points
  • Heavy-duty steel ripper points
Working width Option 1: 2.5 m / 8.33 ft / Option 2: 3.2 m / 10.42 ft / Option 3: 3.8 m / 12.5 ft
Transport width Option 1: 2.1 m / 7 ft / Option 2: 2.1 m / Option 3: 2.1 m
Operating depth Maximum / 58.4 cm / 23 in. /
We are here to help
Features

Soil probe helps to determine proper operating depth

Soil probeSoil probe
#

The soil probe helps operators to determine the proper operating depth of their ripper points,
38 mm (1.5 in.) below the bottom of the compaction layer.

The probe allows obtaining the maximum amount of soil fracturing from the entire family of John Deere ripper points. Marked in 51-mm (2-in.) increments from 254 mm to 559 mm (10 in. to 22 in.), the probe provides accurate feedback of compaction layer depth.

 

It is stored on the mainframe of the ripper for convenient access. The operator's manual explains the proper use of the soil probe.


913 V-Ripper 913 V-Ripper
#

The frame design of the 913 V-Ripper positions the standards in a V pattern:

  • Promotes leading-edge shattering of the center shank and material flow through the machine

The 127-mm x 178-mm (5-in. x 7-in.) cross-section frame has 10-mm (3/8-in.) thick walls:

  • Provides strength to handle tractors of up to 150 power take-off (PTO) horsepower
  • Same frame-size tubing as non-expandable 915 V-Ripper
  • Parking stands are included in base equipment

Low and high positions on 3-point mastLow and high positions on 3-point mast
#

3-point hitch hookup is for Category 2 or 3N tractors.

 

The integral hitch can be set to two positions:

  • 1 = Low position
    Gives maximum transport clearance and allows ripping to approximately 508 mm (20 in.) deep with the 838-mm (33-in.) standards.
  • 2 = High position
    Enables ripping to a maximum depth of 584 mm (23 in.) deep with the 838-mm (33-in.) standards.

Specs
Key Specs
Working width Option 1: 2.5 m
8.33 ft
Option 2: 3.2 m
10.42 ft
Option 3: 3.8 m
12.5 ft
Transport width Option 1: 2.1 m
7 ft
Option 2: 2.1 m
Option 3: 2.1 m
Operating depth Maximum
58.4 cm
23 in.
Ground-engaging components
o O
Hitch
Options Integral
Three-point hitch requirements Category 2 or 3N with Quik Coupler
Category 3N without Quik Coupler
Standard options
Option 1 Trip force
5,443 kg
12,000 lb
Standard type
Straight or parabolic with wear shin
Shear-bolt
Option 2 Trip force
2,540 kg
5,600 lb
Standard type
Straight with wear shin or parabolic
Safety-trip
Option 3 Trip force
2,404 kg
5,300 lb
Standard type
Straight with wear shin or parabolic
Cushion-trip
Spacings 50.8 cm
20 in.
63.5 cm
25 in.
76.2 cm
30 in.
Option 4 Trip force
1,451.5 to 2,404 kg
3,200 to 5,300 lb
Standard type
Parabolic
Spring-reset rock standard
Tool configuration
Type V-ripper
Accessories and Attachments
Hitch

Bushing - A36380


Bushing, Shouldered - N181591


Hitch Pin, Category II - A17383


Mast Ball, Category II - N180506


*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
561-296-7523

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
Sarasota

6209 McIntosh Rd
Sarasota, FL 34238
941-924-9709

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group