John Deere 714

Feature Overview
John Deere 714
  • Simple gang depth adjustment
  • Coulter gangs
  • Three-bar frames
  • Stabilizer wheels
Working width 2-bar 1.9-3.43 m / 6.25-11.25 ft
Working width 3-bar 3.43-6.48 m / 11.25-21.25 ft
Transport width 2.1-4.4 m / 7-14.33 ft
Transport height 1.35-3.4 m / 4.42-11 ft
Feature Overview
John Deere 714
  • Simple gang depth adjustment
  • Coulter gangs
  • Three-bar frames
  • Stabilizer wheels
Working width 2-bar 1.9-3.43 m / 6.25-11.25 ft
Working width 3-bar 3.43-6.48 m / 11.25-21.25 ft
Transport width 2.1-4.4 m / 7-14.33 ft
Transport height 1.35-3.4 m / 4.42-11 ft
We are here to help
Features

Three-bar frames offer strength

Three-bar frame of the 714 Mulch TillerThree-bar frame of the 714 Mulch Tiller

The three-bar frame:

  • Is constructed of three ranks of standards
  • Has strength to match higher horsepower tractors
  • Handles heavier residue levels

Three-bar frame models have these strength features:

  • One-piece welded construction
  • Solid steel in rear mainframe member
  • 102-mm x 102-mm (4-in. x 4-in.) cross members
  • 51-mm x 102-mm (2-in. x 4-in.) side members
  • 76-mm x 127-mm (3-in. x 5-in.) diagonal frame supports

Mechanical depth adjustmentMechanical depth adjustment
#

The three-bar disk gang model features a mechanical depth adjustment:

  • Depth adjuster bolts (1) allow adjustment of individual gangs up or down within a 140-mm (5.5-in.) range.
Hydraulic depth adjustmentHydraulic depth adjustment
#

An optional hydraulic depth adjustment (2) is available:

  • Allows on-the-go hydraulic adjustments to be made from the tractor seat
  • Gangs adjust up or down within a 140-mm (5.5-in.) range

Simple, one-location depth control Simple, one-location depth control
#

The crank-adjust single-point depth control is standard equipment on all models and offers the following benefits:

  • More precise adjustment when changing the operating depth
  • Easy access at the front of the machine
  • Accurate, repeatable depth control

714 Mulch Tiller standards714 Mulch Tiller standards
Rigid standard (figure 1):
  • In base equipment on all models
  • 32 mm x 51 mm x 813 mm (1.25 in. x 2 in. x 32 in.)
  • Economical design is suited for fields having few obstructions
  • Till to a maximum depth of 279 mm (11 in.)
  • Good clearance to handle heavy trash
    • 813 mm (32 in.) of underframe clearance 
    • 381-mm (15-in.) center-to-center spacing
Spring-reset 813-mm (32-in.) standard (figure 2):
  • Optional on all models
  • 32 mm x 51 mm x 813 mm (1.25 in. x 2 in. x 32 in.)
  • Suited for fields having rocks or other obstructions
  • Till to a maximum depth of 279 mm (11 in.)
  • Trip height of 254 mm (10 in.) for good clearance
  • 296-kg (650-lb) trip force
  • Automatically resets to the original working position after clearing an obstruction
  • Good clearance to handle heavy trash
    • 813 mm (32 in.) of underframe clearance
    • 381-mm (15-in.) center-to-center spacing
Tru-Depth standard (figure 3):
  • Optional on all models
  • 51 mm x 32 mm x 813 mm (2 in. x 1.25 in. x 32 in.)
  • Edge bent for extra strength
  • Designed to work in rocky ground and heavy draft conditions
  • Till to a maximum depth of 279 mm (11 in.)
  • Trip height of 279 mm (11 in.) for excellent clearance 
  • 568-kg (1250-lb) trip force
  • Once an obstruction is cleared, the standard automatically returns to its original working position  
  •  Excellent clearance to handle heavy trash
    • 813 mm (32 in.) of underframe clearance 
    • 381-mm (15-in.) center-to-center spacing

Typical percents of residue cover remaining are listed in the table. The percentages do not take into account variables such as the condition of the residue, speed and soil type.

Starting residue cover (percent)

Remaining non-fragile* residue cover (percent)

Remaining fragile** residue cover (percent)

 

with 2-in. x 14-in. shovel

with 3-in. x 24-in. shovel

with 4-in. x 24-in. shovel

with 2-in. x 14-in. shovel

with 3-in. x 24-in. shovel

with 4-in. x 24-in. shovel

100

65

55

50

45

40

35

90

55

50

45

40

35

30

80

50

45

40

35

30

28

70

45

38

35

30

28

25

60

40

33

30

27

25

20

50

32

27

25

22

20

17

40

25

22

20

18

15

14

 

*Non-fragile residue includes crops like corn, sorghum, wheat (more than 45 bu).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, cotton.


Coulter gangsCoulter gangs
#

Coulter blades are for use where little incorporation is desired or for erosion-prone areas where it is important to disturb as little residue as possible. Blades are on 229-mm (9-in.) spacing to reduce the chance of plugging.

  • Two-position blade down-pressure adjustment ensures consistent blade down pressure in light- or heavy-residue conditions.
  • Coulter gangs have rigid scraper bars.
  • Dura-Flex© bearings and welded steel spools provide reliable performance and durability.
  • Gangs are spring-cushioned with 140 mm (5.5 in.) of vertical travel to provide protection against rocks or other obstructions.

Shovels and pointsShovels and points

A variety of shovels are available to match conditions:

  • 76-mm x 610-mm (3-in. x 24-in.) concave twisted shovels for use in a wide range of average soil conditions are base equipment.
  • 102-mm x 610-mm (4-in. x 24-in.) concave twisted shovels for use in light, sandy soils or where greater fracturing between the standards is desired, are optional equipment.
  • 51-mm x 305-mm (2-in. x 12-in.) chrome carbide point chisel provides excellent strength and wear life in tough-to-penetrate conditions.

714 long, narrow hitch714 long, narrow hitch

The long narrow hitch design:

  • Allows good maneuverability in tight headlands
  • Is constructed of 51-mm x 127-mm (2-in. x 5-in.) steel tubing for strength
  • Heavy cast-steel hitch link for yoke-type drawbars is standard equipment
  • Hitch clevis is available for use with straight drawbars (not recommended for tractors over 150 engine hp)

A Level-lift™ linkage with easy turnbuckle leveling enables the mulch tiller to remain level whether in transport or in the field position.

 

A hitch jack is included with all models for storage and easier hookup to the tractor.


Specs
Key Specs
Working width 2-bar 1.9-3.43 m
6.25-11.25 ft
Working width 3-bar 3.43-6.48 m
11.25-21.25 ft
Transport width 2.1-4.4 m
7-14.33 ft
Transport height 1.35-3.4 m
4.42-11 ft
Operating depth Inches
27.9 cm
11 in.
Miles per hour 8-11 km/h
5-7 mph
Horsepower per shank 8.95-14.9 kW
12-20 hp
Standard spacings Inches
38.1 cm
15 in.
Disk coulters/gangs
Description One set at front of machine
Type Disk or coulter
Blade size 50.8x0.65 cm
20x0.256 in.
On 2-bar: 0.45 cm
0.177 in.
Coulter size 50.8x0.5 cm
20x0.197 in.
Blade/coulter spacing 22.9 cm
9 in.
Type of scrapers Rigid bar
Type of protection Coil spring
Gang shaft 7.62x10.2 cm
3x4 in.
Fold
R R
Frame
Underframe clearance 81.3 cm
32 in.
Ground-engaging components
o O
Number of shanks - fold
Option 5 Rigid: 11-shank
Option 6 Rigid: 13-shank
Option 7 Folding: 15-shank
Option 8 Folding: 17-shank
Standard spacings
I I
Wheels and tires
Option 1 Single wheel - 9.5L-15FI Load Range D (2-bar design)
Option 2 Single wheel 11L-15FI Load Range D (3-bar)
Option 3 Walking tandem - 9.5L-15FI Load Range D (3-bar)
Option 4 Walking tandem - 11L-15FI Load Range D (3-bar)
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group