John Deere 635D

Feature Overview
John Deere 635D
  • Windrowing capability with 600D Drapers
  • Double-cut knife system produces a cleaner cut
  • Cutterbar is closer to the ground
  • Stainless-steel feed floor
Feature Overview
John Deere 635D
  • Windrowing capability with 600D Drapers
  • Double-cut knife system produces a cleaner cut
  • Cutterbar is closer to the ground
  • Stainless-steel feed floor

Takes only one person a few minutes to convert draper from field to transport without use of tools

<div class="seccion-images"><p>The 630D, 635D, and the 640D Draper models can be equipped with an integral, slow-speed transport system.</p><p>&nbsp;</p><p><strong>Customer Value:</strong></p><ul> <li>Dual-front dolly wheel tires with an extendable tongue and two-gauge wheel tires carry the complete weight of the draper when in transport, eliminating the need for a header trailer</li> <li>One person can convert the draper from field to transport mode in a few minutes without the use of tools, expediting road transport</li> </ul><div class="seccion-images"> <div> <img src="img/deere_features/draper-transport-asm1.jpg" alt="600D integral transport system"> <span class="caption">600D integral transport system</span> </div> <div> <img src="img/deere_features/draper-transport-asm2.jpg" alt="600D integral transport system pulled by tractor"> <span class="caption">600D integral transport system pulled by tractor</span> </div> </div><h5>Theory of Operation:</h5><div class="seccion-images"> <div> <img src="img/deere_features/draper-transport1-496552.jpg" alt="Step 1-lock left-hand gauge wheels in place"> <span class="caption">Step 1-lock left-hand gauge wheels in place</span> </div> <div> <img src="img/deere_features/draper-transport2-496548.jpg" alt="Step 2-lock right-hand gauge and transport wheels"> <span class="caption">Step 2-lock right-hand gauge and transport wheels</span> </div> </div><div class="seccion-images"> <div> <img src="img/deere_features/draper-transport4-496555.jpg" alt="Step 3-position transport warning lights"> <span class="caption">Step 3-position transport warning lights</span> </div> <div> <img src="img/deere_features/draper-transport-3-496553.jpg" alt="Step 4-install transport tongue"> <span class="caption">Step 4-install transport tongue</span> </div> </div><div class="seccion-images"></div><p>&nbsp;</p><p>In field mode, the dual wheels become the left- and right-hand gauge wheels. For transport, the&nbsp;left-hand dual-dolly wheels support one side of the draper frame and the right-hand dual wheels are repositioned to support the right-hand end of the frame.</p><p>&nbsp;</p><p>The transport package includes warning lights,&nbsp;which can be plugged into a seven-way power source for road transport with a 32.2-km/h (20-mph) speed limit for farm equipment transport.</p><p>&nbsp;</p><p><em>NOTE: The 630D, 635D,&nbsp;and the 640D Drapers are equipped with&nbsp;two 20.5 x 8.0 12-ply equivalent gauge wheel tires as base equipment and&nbsp;four 20.5 x 8.0 12-ply equivalent gauge wheels with the low-speed transport option.</em></p></div>

<div class="seccion-images"> <div> <img src="img/deere_features/492634-ctrbar-knife-dr-grcase.jpg" alt="Cutterbar epicyclical gearcase"> <span class="caption">Cutterbar epicyclical gearcase</span> </div> <div> <img src="img/deere_features/492633-draper-knife-drive.jpg" alt="Knife drive shaft"> <span class="caption">Knife drive shaft</span> </div> <div class="seccion-images"></div><p>The unique dual-knife-drive system is timed, creating the smoothest-possible reciprocating knife-drive system currently in the industry.&nbsp;The positive, reliable shaft-driven dual epicyclical in-line knife drives with built-in driveline protection provide&nbsp;operators with the strongest knife-drive system.</p></div>

<div class="seccion-images"><p>All John Deere 600D Drapers include a double-cut knife which features a hydraulic tilt that is controlled from inside the cab. All 10.6-m (35-ft)&nbsp;and&nbsp;12.1-m (40-ft)&nbsp;draper cutterbars also have knifeback reinforcement straps to strengthen the knifeback.</p><p>&nbsp;</p><p><strong>Customer Value:</strong></p><ul> <li>Longer stroke of knife section provides a faster, cleaner, and smoother cut which allows operators to harvest at faster ground speeds maximizing productivity</li> <li>Reinforced knifeback strengthens cutterbar for tough harvesting conditions maximizing performance</li> <li>Hardened sickle sections and unique boron treatment extends wear life</li> <li>Hydraulic tilt&nbsp;optimizes the cutterbar angle for varying conditions, extending the harvest day&nbsp;and providing the lowest-possible cut height</li> </ul><div class="seccion-images"> <div> <img src="img/deere_features/492658-draper-cutterbar.jpg" alt="Double-cut cutterbar system"> <span class="caption">Double-cut cutterbar system</span> </div> <div> <img src="img/deere_features/492658-600seriescutterbar.jpg" alt="Double-cut rock guard"> <span class="caption">Double-cut rock guard</span> </div> </div><h5>Theory of Operation:</h5><div class="seccion-images"></div><p>The 100-mm (4-in.) cutting action produces a cleaner cut versus the tearing effect of shorter-stroke cutting systems. Knife hold-downs are easily adjusted to help maintain harvesting performance.</p><div class="seccion-images"> <div> <img src="img/deere_features/492647-tilt-cylinder.jpg" alt="Tilt cylinder"> <span class="caption">Tilt cylinder</span> </div> <div> <img src="img/deere_features/clearpix.gif" alt="#"> </div> </div><p>&nbsp;</p><p>The cutterbar hydraulic tilt adjusts a full 8 degrees while maintaining excellent visibility to the cutterbar throughout the tilt range.&nbsp;For improved ease of use the optional advanced hydro handle can be configured to control the platform tilt.</p></div>

<div class="seccion-images"><p>Reel resume and reverse are features&nbsp;on the 600D Drapers. The combine operator can store two different reel positions with one setting for normal conditions and another for down, tangled, short, leaning crops.&nbsp;</p><p>&nbsp;</p><p><strong>Customer Value:</strong></p><ul> <li>Added time savings and convenience with saved reel positions, lowering operator fatigue</li> <li>Reel-reverse feature&nbsp;reverses the reel in conjunction with the center feed drum and belt to back out plugs and increase harvest efficiency</li> </ul><div class="seccion-images"> <div> <img src="img/deere_features/492649-draperdrum.jpg" alt="Draper drum"> <span class="caption">Draper drum</span> </div> <div> <img src="img/deere_features/r4d013467-draper-reel.jpg" alt="Draper reel"> <span class="caption">Draper reel</span> </div> </div></div>

Auxiliary top auger
Length 10.8 m
35.5 ft
Knife drive Dual knife base
Knife speed 490 cycles/min
Cutterbar tilt Base hydraulic, 9 degrees tilt maximum
Platform length 11.6 m
37.9 ft
Overall operating depth 2.5 m
8.2 ft
Transport width, field position 11.4 m
37.5 ft
Transport width on wheel, less dividers 2.7 m
8.9 ft
Transport length, hitch extended 13.8 m
45.4 ft
Draper belts
Speed control Hydraulic from cab
Width Side belts 1,016 mm
40 in.
Center belts 1,397 mm
55 in.
Center belt not included with SPW configuration
Clean height Cleats 25.4 mm
1 in.
Center belt reverse Base; Center belt not included with SPW configuration
Feed drum
Diameter 406 mm
16 in.
Feed drum not included with SPW configuration
Operating speed 195 rpm
Feed drum fingers Heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer
Number of fingers 18
Auger finger platform Dual chevron, retracting
Finger reach 152 mm
6 in.
Drum/auger reverse Base
Center clean out door Base
Header height sensing
Type Electro-hydraulic, base
Header height sensing on the ground Base
Header height sensing off the ground Base
Pickup reel
Number of slats 6 bat poly base
Fingers Nylon
Height control Hydraulic
Reel lift Cylinder stroke 330 mm
13 in.
Total range 391.5 mm
15.4 in.
Reel fore and aft Cylinder stroke 359 mm
14.1 in.
Total range 620 mm
24.4 in.
Reel resume Base
Reel reverse Base
Operating speeds 6-54 rpm
Approximate weight (pickup reel) Combine only 3,514 kg
7,746 lb
SPW only 2,914 kg
6,423 lb
Approximate weight (with transport) Combine only 3,690 kg
8,136 lb
SPW only 3,091 kg
6,813 lb
Accessories and Attachments
600 Series HydraFlex Platforms
Wedge kitWedge kit

In certain field conditions, when harvesting with 600 Series cutting platforms attached to pre-60 Series combines equipped with tall drive tires (for example, 35.5x32-in. or 42-in. dual wheels), it may not be possible to obtain the desired or optimum cutting bar angle. This is due to the extreme height of the drive tires, especially if used in conjunction with the tall 18.4x30 or 28Lx26 high-flotation rear steering tires.


The wedge kit allows the lower frame of the platform to be tilted upward to any one of three different degrees when attached to the combine so the desired cutter bar angle adjustment can be obtained.

Distance between center of F.H. and the groundDistance between center of F.H. and the ground

The following chart and illustration below can be used to help determine if the wedge kit is required on the platform for the combine being used.


Position machine on flat level ground with platform removed.


Position feederhouse so face is perpendicular to the ground. To check this, a bubble level can be placed on the face of the feederhouse.


Measure distance (A) between the center of feederhouse drive shaft and the ground.


Compare dimension to table and determine amount of wedge angle required.


For 50 Series STS™ Combine
Dimension A
Wedge Angle Required
Less than 710 mm (28 in.)




710 to 775 mm (28 to 30.5 in.)


1.5-degree wedge


775 to 825 mm (30.5 to 32.5 in.)


3-degree wedge


More than 825 mm (32.5 in.)


4.5-degree wedge



For 50 Series and Prior Walker Combines
Dimension A
Wedge Angle Required
Less than 710 mm (28.0 in.)




710 to 750 mm (28.0 to 29.5 in.)


1.5-degree wedge


750 to 790 mm (29.5 to 31.0 in.)


3-degree wedge


More than 790 mm (31.0 in.)


4.5-degree wedge


Three programmable reel position settings will optimize platform performance while minimizing header losses.  The operator can preselect three different reel positions for specific field conditions and can access these while harvesting, simply by touching the activation buttons on the multifunction hydro handle.


Feature benefit:

  • Three programmable positions to optimize platform performance
  • Reduces operator stress by conveniently moving the reel to a preselected position to minimize header losses
Fore-aft reel resumeFore-aft reel resume



Adjust the reel height and fore-aft position to an optimal position then press the 1, 2, or 3 button on the multifunction control lever until arrows on each side of the symbol indicates that the system is active. This will save that reel position for that button which can be done for each number on the handle.

600D Series and 600FD HydraFlex Series Draper Platforms

The reel tine flip-over attachment makes it so the reel fingers point upward when completing the rotation at the top of the reel, instead of pointing to the ground.


John Deere value:

  • Reduces wrapping of crop material in tough, wet, viney crops such as soybeans, peas, straight cut edible beans, and canola
  • Reduces crop wrapping and increases the draper’s capacity, which reduces losses at the reel
  • Increases visibility to the front of the draper
Reel flip-over attachmentReel flip-over attachment

600D Series Draper Platforms


Combine with 625DCombine with 625D

The optional dual zone float kit provides better platform balance for a more accurate cut height right to left. The dual zone system allows the operator to independently adjust float pressure to the right and left float cylinders. Independent float cylinders adjustments allow the platform to tilt independently or in conjunction with the feederhouse.

  • Contour-Master™ feederhouse - allows platform to stay level with the tilting feeder house.
  • LevelLand feeder house - allows platform to stay level with the contours of the ground.

Feed drum with anti-wrap brackets installedFeed drum with anti-wrap brackets installed

The feed drum anti-wrap attachment is recommended for tall, damp crop conditions to reduce drum wrapping. The attachment consists of two brackets that mount near the outer edge of the feed drum and reduce the likelihood of crop wrapping around the drum.

Feed drum with anti-wrap brackets installedFeed drum with anti-wrap brackets installed

The feed drum anti-wrap attachment is recommended for tall, damp crop conditions to reduce drum wrapping. The attachment consists of two brackets that mount near the outer edge of the feed drum and reduce the likelihood of crop wrapping around the drum.

*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426

Map & Hours

22255 Cortez Blvd
Brooksville, FL 34601

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947

Map & Hours

775 E Main St
Immokalee, FL 34142

Map & Hours

6785 114th Ave
Largo, FL 33773

Map & Hours

1800 US-441
Leesburg, FL 34748

Map & Hours

13295 Southern Blvd
Loxahatchee, FL 33470

Map & Hours

1945 Pine Ridge Rd
Naples, FL 34109

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289

Map & Hours

2240 Success Dr
Odessa, FL 33556

Map & Hours

820 US-98
Okeechobee, FL 34972

Map & Hours

12049 S Orange Blossom Trail
Orlando, FL 32837

Map & Hours

906 US-301
Palmetto, FL 34221

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769

Map & Hours
©2021 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group