• Operating Speeds 7-10 mph
  • "> John Deere 2633VT Implements | Everglades Equipment Group
  • Operating Speeds 7-10 mph
  • ">

    John Deere 2633VT

    Feature Overview
    John Deere 2633VT
    • Gang angle 21° Front/19° Rear
    • Working Widths from 20'9" to 40'8"
    • Operating Speeds 7-10 mph
    Feature Overview
    John Deere 2633VT
    • Gang angle 21° Front/19° Rear
    • Working Widths from 20'9" to 40'8"
    • Operating Speeds 7-10 mph
    We are here to help
    Features

    Six sizes available to fit right machine to any size operation

    Ground-engaging components on 2633VT Ground-engaging components on 2633VT
    2633VT pulled by 8370RT 2633VT pulled by 8370RT

    The John Deere 2633VT offers six different sizes to fit any size operation, big or small.

    Model 2633VT
    Purpose Vertical tillage
    Working depth Up to 75 mm (3 in.)
    Standards C-spring
    Gang angle 21 degrees front
    19 degrees rear
    Front gang blades
    • 560 mm x 5 mm (22 in. x 0.197 in.) solid shallow concavity spherical
    • Optional 560 mm x 6.5 mm (22 in. x 0.256 in.) solid shallow concavity spherical
    Rear gang blades 560 mm x 5 mm (22 in. x 0.197 in.) solid shallow concavity 13 wave
    Blade spacing 185 mm (7.25 in.)
    Gang bolt 50 mm (2 in.)
    Horsepower 27-36 hp/m (8.5-11 hp/ft) working width
    Working widths 6.3 m to 12.4 m (20 ft, 9 in. to 40 ft, 8 in.)
    Operating speed 11-16 km/h (7-10 mph)

    Size

    6.3 m
    (20 ft, 9 in.)

    8 m
    (26 ft, 5 in.)

    8.9 m
    (29 ft, 3 in.)

    9.3 m
    (30 ft, 8 in.)

    10.2 m
    (33 ft, 7 in.)

    12.4 m
    (40 ft, 8 in.)

    Weight

    6796 kg
    (14,983 lb)

    9060 kg
    (19,976 lb)

    9230 kg
    (20,343 lb)

    9920 kg
    (21,871 lb)

    10025 kg
    (22,100 lb)

    12991 kg
    (28,641 lb)

    Number of blades

    68

    88

    96

    104

    112

    136

    Weight per blade

    100 kg
    (220 lb)

    103 kg
    (227 lb)

    96 kg
    (211 lb)

    95 kg
    (210 lb)

    90 kg
    (197 lb)

    95 kg
    (210 lb)

    Horsepower requirement
    (power take-off [PTO])

    131.2-170 kW
    (176-228 hp)

    164.8-213.3 kW
    (221-286 hp)

    184.2-237.9 kW
    (247-319 hp)

    196.1-254.3 kW
    (263-341 hp)

    208.8-270.7 kW
    (280-363 hp)

    259.5-335.6 kW
    (348-450 hp)

    Transport height

    3.05 m
    (10 ft)

    3.90 m
    (12 ft, 10 in.)

    4.30 m
    (14 ft, 1 in.)

    4.21 m
    (13 ft, 10 in.)

    4.62 m
    (15 ft, 2 in.)

    3.75 m
    (12 ft, 4 in.)

    Transport width

    4.11 m
    (13 ft, 6 in.)

    4.11 m
    (13 ft, 6 in.)

    4.11 m
    (13 ft, 6 in.)

    4.77 m
    (15 ft, 8 in.)

    4.77 m
    (15 ft, 8 in.)

    4.95 m
    (16 ft, 3 in.)


    John Deere's 2633VT comes equipped on 185-mm (7.25-in.) spacing with solid shallow concavity spherical blades on the front gang and solid shallow concavity wavy blades on the rear gang to size residue and mix soil.

    A majority of the sizing is going to be done by the front gang, and the rear gang is going to do the mixing. John Deere designed its vertical tillage tool to chop stalks to an acceptable size and begin soil mixing for breakdown, yet leave a considerable amount of residue on the cover.

    The 2633VT comes equipped with 185-mm (7.25-in.) spacing on the front and rear gang. Both blade sizes on front and rear gang are 560 mm x 5 mm (22 in. x 0.197 in.). Optional 560-mm x 6.5-mm (22-in. x 0.256-in.) blades are available on front gang only.

    Front solid shallow concavity spherical blade
    Solid shallow concavity spherical blade Solid shallow concavity spherical blade
    • Chops and sizes residue
    • Manages weeds
    • Manages root balls
    • Removes field ruts
    Rear solid shallow concavity wavy blade
    Solid shallow concavity wavy blade Solid shallow concavity wavy blade
    • Mix soil and residue
    • Aerates soil
    • Anchors residue
    Front and rear 185-mm (7.25-in.) spacing
    185-mm (7.25-in.) blade spacing 185-mm (7.25-in.) blade spacing
    #
    • Ideal for seedbed preparation
    • Maximizes chemical incorporation  
     Blade type  Solid spherical blade  Solid wavy blade
    Thickness
    • 5 mm (0.197 in.)
    • Optional 6.5 mm (0.256 in.)
     5 mm (0.197 in.)
    Concavity  Shallow  Shallow
    Diameter  560 mm (22 in.)  560 mm (22 in.)
    Recommended soil types  All soil types  All soil types

    51-mm (2-in.) gang bolts 51-mm (2-in.) gang bolts
    Gang tension system Gang tension system

    John Deere's 2633VT Vertical Tillage tool provides an innovative approach to tension gang bolts. 


    Hydraulic fore-aft leveling Hydraulic fore-aft leveling

    Hydraulic fore-aft leveling comes as standard equipment with John Deere's 2633VT Vertical Tillage tool. Operators can level the machine from the comfort of the tractor cab.


    Residue management Residue management

    Whether the plan is to use the 2633VT in the spring or fall, this machine was designed to handle any residue management situation. With a 21-degree angle on the front gang and 19-degree gang angle on the rear gang, this tool was created to have aggressive sizing and chopping ability in tough residue in the fall and to have finishing characteristics to build an ideal seedbed in the spring.

    Shallow gang angle Shallow gang angle
    Aggressive gang angle Aggressive gang angle

    Shallow gang angle vertical tillage tools can leave a wavy, washboard effect unsuitable for a proper seedbed. The 2633VT implement has an aggressive gang angle to help anchor residue, manage weeds and root balls, and create an even, smooth seedbed under the topsoil.

    As crop yields increase, so does the amount of residue after harvest. The John Deere 2633VT allows producers to prepare soil for planting in the spring and residue management in the fall.

    Utilize the residue calculator to identify the optimal residue management solution to meet the producer’s needs.


    John Deere’s 2630 Series Disks and Vertical Tillage Implements feature extended-life bearings. These more durable and reliable bearings allow producers to customize bearing maintenance for specific growing conditions and soil types.

    The flange-mounted bearing and sealing system features improved contamination resistance. The advanced seal material is highly resistant to wear and damage caused by abrasive soils and other crop materials. The design of these are more durable and reliable than previous bearings.

    The design of this bearing system allows for dynamic self-alignment to the gang bolt, as opposed to trunnion-mounted bearings that have limited alignment capability. This system features additional freedom of movement, accommodating a wider variety of field conditions. The bearing system has been designed to decrease stress and fatigue on the inner rolling surfaces, supporting extended bearing life.

    The bearing and seal design allows for a limited, seasonal maintenance interval to minimize downtime. They also allow producers to customize the maintenance for specific growing conditions and soil types. The multi-lipped sealing system cannot be damaged by frequent greasing. It allows bearings to accept grease within the bearing as well as provide grease to the outer bearing surface to eliminate wear between the bearing and housing. With this design, the bearings can accept grease even if misaligned to the housing.


    #
    #

    The 2630 Series Disks offer multiple upgrades and new items as options versus the 2620 Series Disks to enhance the machine. Check out the following video sharing more about the new 2630 Series Disks.

    Extended-life bearings

    John Deere’s 2630 Series Disks and Vertical Tillage Implements feature extended-life bearings. These more durable and reliable bearings allow producers to customize bearing maintenance for specific growing conditions and soil type.

    TruSet© side-to-side feature

    John Deere TruSet system is featured in base equipment for the 2630 Series Disks and Vertical Tillage Implements. TruSet side-to-side is also available and features individual section leveling.

    Knife-edge hydraulic rolling basket

    The hydraulic rolling basket is now offered with a round bar, flat bar, or knife-edge. The knife-edge is best for heavier, wet soil, and can be used in rocky conditions.

    Radial tires

    The 2630 Series Disks and Vertical Tillage Implements feature radial tires for the mainframes in base equipment. Radial tires are available as an option on the wing frame and stabilizer wheels. These tires are designed to offer longer wear life and help minimize compaction with a wider plate and lower inflation pressures.

    Stabilizer wheels

    Producers can choose either mechanical stabilizer wheels or TruSet hydraulic stabilizer wheels as an option. Stabilizer wheels help to maintain a consistent, level depth and are recommended for operation on rolling ground. The mechanical stabilizer wheels can be manually adjusted with a turnbuckle. TruSet with side-to-side leveling capabilities also enables operators to control the TruSet hydraulic stabilizer wheels from the cab while on the go.


    Hydraulic rolling basket with down pressure Hydraulic rolling basket with down pressure
    Hydraulic rolling basket - in raised position Hydraulic rolling basket - in raised position

    The 2633VT offers an active hydraulic rolling baskets that give the operator wide-ranging adjustability for a variety of conditions. The drawbars and rolling basket on the rear harrow are built with strength in mind for demanding vertical tillage conditions.

    The system was designed to have the ability to run the rolling baskets in three different positions:

    • Raised
      • Allows the operator to raise the rolling baskets in harsh, muddy conditions
    • Float
      • Allows the operator to float the rolling baskets to lightly fluff soil
    • Apply down pressure
      • Allows the operator to adjust the basket pressure to provide consistent contact with the ground
      • Provides a firm seedbed
      • Shatters root balls

    The hydraulic rolling basket is offered with a round bar, flat bar, or knife-edge. The flat bar is not recommended for rocky conditions. The knife-edge is best for heavier, wet soil.

    Maintenance-free bearing in rolling basket Maintenance-free bearing in rolling basket
    Maintenance-free bearing in rolling basket Maintenance-free bearing in rolling basket

    With these rolling baskets, a cast frame was designed to encase the bearing in a high-density polymer liner to allow dynamic movement and maintenance-free characteristics. Similar to the gangs on the 2633VT, the active hydraulic rolling baskets feature maintenance-free bearings to minimize non-productive activities.

    Hydraulic rolling basket down pressure valve Hydraulic rolling basket down pressure valve
    Hydraulic flat bar rolling basket harrow Hydraulic flat bar rolling basket harrow
    Hydraulic knife-edge rolling basket harrow Hydraulic knife-edge rolling basket harrow

    In order to change the rolling basket down pressure, simply rotate the down pressure valve dial clockwise to increase pressure and counterclockwise to decrease pressure.


    Specs
    *Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
    Belle Glade

    2017 Northwest 16th Street
    Belle Glade, FL 33430
    561-996-6531

    Map & Hours
    Boynton Beach

    1335 Neptune Dr
    Boynton Beach, FL 33426
    561-732-8905

    Map & Hours
    Brooksville

    22255 Cortez Blvd
    Brooksville, FL 34601
    352-573-2720

    Map & Hours
    Fort Myers

    9501 FL-82
    Fort Myers, FL 33905
    239-332-5045

    Map & Hours
    Fort Pierce

    6150 Orange Ave
    Fort Pierce, FL 34947
    772-461-5568

    Map & Hours
    Immokalee

    775 E Main St
    Immokalee, FL 34142
    239-657-4413

    Map & Hours
    Largo

    6785 114th Ave
    Largo, FL 33773
    727-828-8200

    Map & Hours
    Leesburg

    1800 US-441
    Leesburg, FL 34748
    352-315-1016

    Map & Hours
    Loxahatchee

    13295 Southern Blvd
    Loxahatchee, FL 33470
    561-784-4000

    Map & Hours
    Naples

    1945 Pine Ridge Rd
    Naples, FL 34109
    239-260-8800

    Map & Hours
    North Port

    2825 Commerce Parkway
    North Port, FL 34289
    941-924-9709

    Map & Hours
    Odessa

    2240 Success Dr
    Odessa, FL 33556
    727-842-8618

    Map & Hours
    Okeechobee

    820 US-98
    Okeechobee, FL 34972
    863-763-1921

    Map & Hours
    Orlando

    12049 S Orange Blossom Trail
    Orlando, FL 32837
    407-240-1023

    Map & Hours
    Palmetto

    906 US-301
    Palmetto, FL 34221
    941-722-3281

    Map & Hours
    Plant City

    2805 West, FL-60
    Plant City, FL 33567
    813-737-1660

    Map & Hours
    St Cloud

    117 13th St
    St Cloud, FL 34769
    321-209-4888

    Map & Hours
    ©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group