• Easy-to-tension 2-in. gang bolts
  • "> John Deere 2623 Implements | Everglades Equipment Group
  • Easy-to-tension 2-in. gang bolts
  • ">

    John Deere 2623

    Feature Overview
    John Deere 2623
    • Perfect for medium to heavy soils, seedbed prep, residue sizing/incorporation
    • Ten widths from 20'9" to 49'3"
    • Easy-to-tension 2-in. gang bolts
    Feature Overview
    John Deere 2623
    • Perfect for medium to heavy soils, seedbed prep, residue sizing/incorporation
    • Ten widths from 20'9" to 49'3"
    • Easy-to-tension 2-in. gang bolts

    2600 Series includes disks for light, medium, and heavy-duty tillage

    Ground-engaging components on 2623Ground-engaging components on 2623
    Three-section disk in transportThree-section disk in transport

    The John Deere 2600 Series offer three disk models that provide a wide range of variety for all tillage applications.


    2620 Disk2623 Disk 2625 Disk
     PurposeSecondary (light duty)Dual purpose (medium duty)Primary (heavy duty)
     Working depth (mm, in.)Up to 130 mm (5 in.)Up to 180 mm (7 in.)Up to 200 mm (8 in.)
     Weight per blade (kg, lb)Minimum 68 kg (150 lb)Under 13.4 m (44 ft)
    Minimum 86 kg (190 lb)
    Over 13.4 m (44 ft)
    Minimum 91 kg (200 lb)
    Minimum 127 kg (280 lb)
     Blade size (mm, in.)560 or 610 mm
    (22 in. or 24 in.)
    610 or 660 mm
    (24 in. or 26 in.)
    610 or 660 mm
    (24 in. or 26 in.)
     Blade spacing (mm, in.)185 or 230 mm
    (7.25 in. or 9 in.)
    230 mm (9 in.)230 mm (9 in.)
    (front) and 280 mm
    (11 in.) (rear),
    or 280 mm (11 in.)
     Horsepower (hp/m, hp/ft)23 - 36 m/hp (7 - 11 ft/hp) 23 - 36 m/hp (7 - 11 ft/hp) 26 - 36 m/hp (8 - 11 ft/hp)
     Working widths (m, ft)6.3 m - 15.0 m
    (20.75 ft - 49.25 ft)
    6.3 m - 15.0 m
    (20.75 ft - 49.25 ft
    7.2 m-12.4 m
    (23.58 - 40.66 ft)
     Operating speed (km/h, mph6.5 - 11.3 km/h
    (4 - 7 mph)
    6.5 - 11.3 km/h
    (4 - 7 mph)
    6.5 - 11.3 km/h
    (4 - 7 mph)
     Recommended use
    • Light to medium soils
    • Seedbed preparation
    • Medium to heavy soils
    • Seedbed preparation
    • Residue sizing
    • Residue incorporation
    • Heavy soils
    • Residue sizing
    • Residue incorporation

    Spring packSpring pack
    Spring packSpring pack

    John Deere’s mechanical wing control helps producers keep their frames level for five-section disks. Mechanical wing control is included in base equipment for all five-section 2600 Series Disks.

    With this feature, a large spring is placed in the wing frame on each side of the disk. As the pivot point in the wing starts to raise, the spring presses against that point to keep the disk level through tough field conditions.

    The red circles below illustrate the area of the disk where the large spring is place in the wing frame.

    Mechanical wing controlMechanical wing control

    John Deere’s mechanical wing control is an industry-exclusive feature. A five-section disk without mechanical wing control can show up to 75-mm (3-in.) of depth inconsistency across the wing frame.

    John Deere's 2600 Series Disks offer different blade options for soil penetration and residue sizing.

    Cone bladeCone blade
    Solid-spherical bladeSolid-spherical blade
    Cutout-spherical bladeCutout-spherical blade
     Blade typeCone blades
    (John Deere exclusive)
    Solid-spherical bladesCutout-spherical blades
     Recommended application
    • Primary tillage
    • Aggressive disking
    • Primary tillage
    • Secondary tillage
    • Primary tillage
     Recommended soil typeHeavy soilsLight to medium soilsHeavy to medium soils 
     BenefitsMove soil and reside freely, but also increase draft requirementsBetter control of soil than cone blades since less sensitive to over speedingChopping or trapping residue
     PenetrationPenetrate well at a 20-degree gang angle, but best at a 22-degree gang anglePenetrate best at a 20-degree gang anglePenetration is excellent with a cutout blade

    NOTE: Cone blades not recommended in rocky conditions.

    Disk blade options
    • Disk blades compatible with 2620 Disk
    • Disk blades compatible with 2623 Disk
    • Disk blades compatible with 2625 Disk

    Hydraulic fore-aft levelingHydraulic fore-aft leveling

    Hydraulic fore-aft leveling comes as standard equipment with John Deere's 2600 Series Disks. Operators can level the disk from the comfort of the tractor cab.

    50-mm (2-in.) disk gang bolts50-mm (2-in.) disk gang bolts
    Gang tension systemGang tension system

    John Deere's 2600 Series Disks provide an innovative approach to tension disk gang bolts. 

    Sealed maintenance-free bearings (front view)Sealed maintenance-free bearings (front view)
    Sealed maintenance-free bearings (bottom view)Sealed maintenance-free bearings (bottom view)

    John Deere’s 2600 Series Disks feature a sealed maintenance-free bearing. A high-density polymer liner allows the bearing to dynamically align the shaft in rough field conditions. The bearing and high-density polymer liner sit inside cast housing. This cast housing was designed for strength and reliability as well as a built-in bearing wear guard.

    These bearings increase productivity by reducing the amount of time needed to service the disk before operation and allowing customers to spend more time in the field.


    As crop yields increase, so does the amount of residue after harvest. The John Deere 2623 Disk provides operators with a disk that can be set to prepare a seedbed for planting or set to bury and size tough residue in primary tillage applications.


    Utilize the residue calculator to identity the optimal residue management solution to meet the customer’s needs.

    The 2623 Dual-Purpose Disk comes equipped with front solid- or cutout-spherical blades and rear solid spherical disk blades with 230-mm (9-in.) spacing. The base blade size is 610 mm x 5 mm (24 in. x 0.197 in.).


    Available blade options for the 2623 are listed below.

    230-mm (9-in.) blade spacing230-mm (9-in.) blade spacing

    230-mm (9-in.) spacing, front and rear

    • Good for seedbed preparation/chemical incorporation in medium to heavy soils
    • Works well in primary tillage in light to medium soils
    • Provides good residue-handling capability


    • The number 1 edge has a beefier profile and is best for rocky conditions.
    • The number 10 edge has a narrower profile and should work well in most non-rock conditions.
    • Rear main and wing gangs are tapered with one blade 51 mm (2 in.) smaller than the primary blade.
    • Integral furrow filler blades are included with all rear wing gangs which are 102 mm (4 in.) smaller than the primary blade.
    • Front outer gangs have a taper that is 51 mm (2 in.) smaller than the primary blade, except for 560-mm (22-in.) disk blades.
    • The John Deere 2623 offers customers a rollable blade option. Rollable disk blades support the
      edge-rolling practices that are commonly used. These blades can be rolled to restore the edge sharpness for customers needing a better penetrating blade.
    • The special boron-composite material is capable of enduring the edge-rolling techniques without jeopardizing blade edge durability and longevity. John Deere does not recommend rolling disk blades that do not have this rollable designation.
    Number 1 edge (outside bevel, outside grind)Number 1 edge (outside bevel, outside grind)
    Number 10 edge (inside bevel, outside grind)Number 10 edge (inside bevel, outside grind)
    1. Bevel
    2. Grind

    Working width 7.19 m
    23.58 ft
    Transport width 4.1 m
    13.5 ft
    Transport height 3.4 m
    11 ft
    Working depth Up to 15.24 cm
    6 in.
    Blade spacing 22.9 cm
    9 in.
    Horsepower per ft 5.97 to 7.5 kW
    8 to 10 hp
    Operating speed 8 to 11.3 km/h
    5 to 7 mph
    Gang standards C-spring
    Gang angle 21/19 degree (angle)
    Purpose Primary or secondary
    Weight per blade 106.6 kg
    235 lb
    Blade size 60.96 cm
    24 in.
    or 66.04 cm
    26 in.
    Number of blades
    Front blades 32 with spacing of 22.9 cm
    9 in.
    Rear blades 32 with spacing of 22.9 cm
    9 in.
    Number of C-Springs
    Total 20 with spacing of 22.9 cm
    9 in.
    Main frame front 4 with spacing of 22.9 cm
    9 in.
    Main frame rear 4 with spacing of 22.9 cm
    9 in.
    1st wing front 6 with spacing of 22.9 cm
    9 in.
    1st wing rear 6 with spacing of 22.9 cm
    9 in.
    *Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
    Belle Glade

    2017 Northwest 16th Street
    Belle Glade, FL 33430

    Map & Hours
    Boynton Beach

    1335 Neptune Dr
    Boynton Beach, FL 33426

    Map & Hours

    22255 Cortez Blvd
    Brooksville, FL 34601

    Map & Hours
    Fort Myers

    9501 FL-82
    Fort Myers, FL 33905

    Map & Hours
    Fort Pierce

    6150 Orange Ave
    Fort Pierce, FL 34947

    Map & Hours

    775 E Main St
    Immokalee, FL 34142

    Map & Hours

    6785 114th Ave
    Largo, FL 33773

    Map & Hours

    1800 US-441
    Leesburg, FL 34748

    Map & Hours

    13295 Southern Blvd
    Loxahatchee, FL 33470

    Map & Hours

    1945 Pine Ridge Rd
    Naples, FL 34109

    Map & Hours
    North Port

    2825 Commerce Parkway
    North Port, FL 34289

    Map & Hours

    2240 Success Dr
    Odessa, FL 33556

    Map & Hours

    820 US-98
    Okeechobee, FL 34972

    Map & Hours

    12049 S Orange Blossom Trail
    Orlando, FL 32837

    Map & Hours

    906 US-301
    Palmetto, FL 34221

    Map & Hours
    Plant City

    2805 West, FL-60
    Plant City, FL 33567

    Map & Hours
    St Cloud

    117 13th St
    St Cloud, FL 34769

    Map & Hours
    ©2021 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group