John Deere 2100

Feature Overview
John Deere 2100
  • Variety of working widths available
  • Mainframe extensions
  • Setback brackets for staggered standard pattern
  • 3/4-in. straight shear-bolt standard minimizes soil and residue disturbance
Working width 2.3 m 7.5 ft / 2.7 m 9 ft / 3.05 m 10 ft / 3.8 m 12.5 ft / 4.6 m 15 ft / 5.3 m 17.5 ft / 6.8 m 22.5 ft
Transport width 3.05 m 10 ft / 4.1 m 13.5 ft / 5 m 16.5 ft / 6.7 m 22 ft / 4.7 m 15.5 ft
Operating depth Maximum / 40.6 cm / 16 in. /
Miles per hour 6.4-8 km/h / 4-5 mph
Feature Overview
John Deere 2100
  • Variety of working widths available
  • Mainframe extensions
  • Setback brackets for staggered standard pattern
  • 3/4-in. straight shear-bolt standard minimizes soil and residue disturbance
Working width 2.3 m 7.5 ft / 2.7 m 9 ft / 3.05 m 10 ft / 3.8 m 12.5 ft / 4.6 m 15 ft / 5.3 m 17.5 ft / 6.8 m 22.5 ft
Transport width 3.05 m 10 ft / 4.1 m 13.5 ft / 5 m 16.5 ft / 6.7 m 22 ft / 4.7 m 15.5 ft
Operating depth Maximum / 40.6 cm / 16 in. /
Miles per hour 6.4-8 km/h / 4-5 mph
We are here to help
Features

Variety of working widths available

The 2100 Minimum-Till Ripper is available in working widths from 2.29 m to 6.86 m
(7 ft, 6 in. to 22 ft, 6 in.).

 

Working width

Number
of standards

Spacing

2.29 m (7 ft, 6 in.)

3

762 mm (30 in.)

2.74 m (9 ft)

3

914 mm (36 in.)

3.05 m (10 ft)

4

762 mm (30 in.)

3.81 m (12 ft, 6 in.)

5

762 mm (30 in.)

4.57 m (15 ft)

5

914 mm (36 in.)

5.33 m (17 ft, 6 in.)

7

762 mm (30 in.)

6.86 m (22 ft, 6 in.)

9

762 mm (30 in.)

6.86 m (22 ft, 6 in.) fold

9

762 mm (30 in.)

 


Adjustable stabilizer wheelsAdjustable stabilizer wheels
#

Two adjustable 521-mm x 203-mm (20.5-in. x 8-in.) stabilizer wheels are included in base equipment to ensure straight travel and provide support on three-, four-, five-, and seven-standard sizes. The nine-standard size has four stabilizer wheels.

 

The stabilizer wheels are designed to stabilize the unit and are not intended to be used as depth gauge wheels. The weight of the unit must be carried on the tractor.

Additional stabilizer wheels and tires can be added if field conditions warrant more support.


Closing wheelClosing wheel
#

Closing wheels can be added to the rear of the 2100 Minimum-Till Ripper with 19-mm (0.75-in.) standards.

Closing wheels offer the following benefits:

  • Minimize surface disturbance created by the standard
  • Provide more adjustments to match farming practices and varying soil conditions than competitive models
  • 114 kg (250 lb) of down pressure
  • Mounted close to the shank, allowing a high trip clearance for operation through washouts, etc.
  • Mounted with an L-bracket, allowing better soil and residue flow

Straight blade shownStraight blade shown

Cushion coulters cut and size residue and pre-slice the soil to allow a more level soil profile:

  • 559-mm x 5-mm (22-in. x 0.177-in.) straight blade is in base equipment and allows the least amount of soil and residue disturbance.
  • 559-mm x 5-mm (22-in. x 0.177-in.) rippled blade is optional equipment for use when increased soil movement is desired.

Frame on seven-standard modelFrame on seven-standard model
#

The frame is constructed with a 102-mm x 152-mm x 10-mm (4-in. x 6-in. x 0.375-in.) cross tube on three-, four-, five-, and seven-standard machines and 152-mm x 152-mm x 10-mm (6-in. x 6-in. x 0.375-in.) cross tube on nine-standard models where the hitch-mounting components are welded for maximum strength.

 

Truss tubes connect the cross tubes and are constructed with 127-mm x 127-mm x 13-mm (5-in. x 5-in. x 0.5-in.) steel tubing.

 

Welded together into one assembly, the frame is designed to handle the most severe operating conditions.

 

The mainframe is 4.06-m (160-in.) wide and is the same whether there are five shanks on 762-mm (30-in.) spacings. Frame extensions make this task possible and make configurations easier to adjust.


Nine-standard drawn hitchNine-standard drawn hitch
#

A drawn hitch option is available for those who want to use large row-crop tractors or 4WD tractors without a 3-point hitch.

The drawn hitch is only compatible with seven-standard and nine-standard 762-mm (30-in.) models. The drawn hitch is also available as an attachment for field conversion.

The transport wheels are placed in front of the front rank of the mainframe. This allows residue to flow freely and keeps the wheels close to the standards to allow the ripper to follow the ground contour.

The wheel modules are mounted to the front, rear, and end frame of the ripper, making it the most stable wheel package in the in-line ripper market. The tires are placed directly in front of the ripper standards so the shanks can remove the tire track in order to leave as level a profile as possible.

There is no need for stabilizer wheels with the drawn hitch. The wheels are located within 762-mm (30 in.) of the outside edge of the machine to provide stability in both field and transport conditions.

The nine-standard model has eight-bolt hubs and spindles with beefy 12.5L-15 tires. The seven-standard model uses 11L-15 tires. The large tires provide excellent field flotation and transport stability.

A pressure-compensating flow divider is the heart of the depth control system. Temporary adjustments can be made while maintaining the ability to raise and lower evenly.

The machine does not need to be fully raised at the end of a pass to keep the cylinders in phase, and cylinder stops are used to set the overall operating depth.

NOTE: The drawn hitch attachment is only compatible with serial number 1300 or newer machines.

Seven-standard drawn hitch foldedSeven-standard drawn hitch folded

19-mm (0.75-in.) ripper standard19-mm (0.75-in.) ripper standard
#

The 19-mm (0.75-in.) straight shear-bolt standard design moves through the soil minimizing soil and residue disturbance at the soil surface.

  • Equipped with replaceable wear shins to control wear on the leading edge of the shank that greatly extends the life of the standard, unlike some of the competitive models
  • Can only be equipped with 64-mm, 178-mm, or 254-mm (2.5-in., 7-in., or 10-in.) min-till ripper points

The 19-mm (0.75-in.) straight standard is base equipment. It is also available as an attachment for field conversion.


Specs
Key Specs
Working width 2.3 m 7.5 ft
2.7 m 9 ft
3.05 m 10 ft
3.8 m 12.5 ft
4.6 m 15 ft
5.3 m 17.5 ft
6.8 m 22.5 ft
Transport width 3.05 m 10 ft
4.1 m 13.5 ft
5 m 16.5 ft
6.7 m 22 ft
4.7 m 15.5 ft
Operating depth Maximum
40.6 cm
16 in.
Miles per hour 6.4-8 km/h
4-5 mph
Horsepower per standard 22.3-29.8 kW
30-40 hp
Depending on soil type, moisture, and depth of operation
NOTE: Maximum compatible tractor engine - 231.2 kW
310 hp
Closing wheel attachment
Size 10.2x40.6 cm
4x16 in.
Down force 113.4 kg
250 lb
Spacing 19.05 to 35.6 cm
7.5 to 14 in.
Angle adjustments 0 to 15 degree (angle)
Coulters
Pounds of force Normal working load: 272.2 kg
600 lb
Deflection of: 10.2 cm
4 in.
Maximum trip load: 362.9 kg
800 lb
Deflection of: 20.3 cm
8 in.
Blades Straight or rippled: 559x4.5 mm
22x0.177 in.
Frame
Maximum underframe clearance 89 cm
35 in.
Ground-engaging components
o O
Hitch
Options Integral, or 7- or 9-standard pull type
Three-point hitch requirements Category 2, Category 3 and 3N (with Quik-Coupler)
Pull-type description Level Lift
Operating speed
M M
Pull-type wheels
Option 1 Set back brackets
Description 12.5L-15 tires for 9-standard pull-type; 11L-15 tires for 7-standard, pull-type; 9-standard has 8-bolt hubs and spindles
Additional feature Replaceable wear shin
Stabilizer/gauge wheels
Type Stabilizer wheels
Wheels 52.1x20.3 cm
20.5x8 in.
Tires 10 PR
Standard options
Option 2 Trip force
1,451.5 kg
3,200 lb
Trip height
30.5 cm
12 in.
Standard type
19 mm
0.75 in.
Cushion trip
Option 3

Option 4

Spacings 76.2 cm
30 in.
91.4 cm
36 in.
Transport width
Option 5 4.1 m
13.5 ft
Option 6 5 m
16.5 ft
Option 7 6.7 m
22 ft
Option 8 4.7 m
15.5 ft
Accessories and Attachments
Miscellaneous
Cushion coultersCushion coulters
#

Cushion coulters cut and size residue and pre-slice the soil to allow a more level soil profile.

Cushion coulters are available in two blade choices:

  • 559-mm x 5-mm (22-in. x 0.177-in.) straight blade allows the least amount of soil and residue disturbance
  • 559-mm x 5-mm (22-in. x 0.177-in.) rippled blade for when increased soil movement is desired

Cushion coultersCushion coulters
#

Cushion coulters cut and size residue and pre-slice the soil to allow a more level soil profile.

Cushion coulters are available in two blade choices:

  • 559-mm x 5-mm (22-in. x 0.177-in.) straight blade allows the least amount of soil and residue disturbance
  • 559-mm x 5-mm (22-in. x 0.177-in.) rippled blade for when increased soil movement is desired

Cushion-trip standardCushion-trip standard
  • 1455 kg (3200 lb) of draft trip force and 955 kg (2100 lb) of obstacle trip force to handle the toughest field conditions
  • Shear-bolt protected above 305 mm (12 in.) of vertical-trip height
  • Compatible with existing 19-mm and 32-mm (0.75-in. and 1.25-in.) min-till standards

Cushion-trip standardCushion-trip standard
  • 1455 kg (3200 lb) of draft trip force and 955 kg (2100 lb) of obstacle trip force to handle the toughest field conditions
  • Shear-bolt protected above 305 mm (12 in.) of vertical-trip height
  • Compatible with existing 19-mm and 32-mm (0.75-in. and 1.25-in.) min-till standards

19-mm (0.75-in.) ripper standards19-mm (0.75-in.) ripper standards
#

The 19-mm (0.75-in.) straight standard design moves through the soil, minimizing soil and residue disturbance at the soil surface.

  • Equipped with replaceable wear shins to control wear on the leading edge of the shank that greatly extends the life of the standard, unlike some of the competitive models
  • Can only be used with min-till ripper points

Standards
Closing wheelsClosing wheels
#
Closing wheels can be added to the rear of the 2100 Minimum-Till Ripper with 19-mm (0.75-in.) standards to minimize surface disturbance.

The wheels are positioned close to the shank to allow increased trip height for going through washouts and depressions.

 

They utilize an L-bracket to attach the wheels, providing better clearance for soil and residue flow.

 

The side-to-side adjustability is 0 mm to 356 mm (0 in. to 14 in.), and the closing wheels attach to the shank with 25-mm (1-in.) diameter hardware.

 

For model year 2007 and older machines, the following parts will be required for one row:

  • One BN260762 closing wheel bundle
  • One N263453 standard casting
  • One N263450 19-mm (0.75-in.) shank
  • Two N263225 spacer shims

Closing Wheel Attachment (Qty. 3) - BN260761


*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group