John Deere 2010DE

Feature Overview
John Deere 2010DE
  • Struck capacity: 10.4 m³ (13.6 cu. yd.)
  • Heaped capacity: 15.3 m³ (20.0 cu. yd.)
  • Bowl width: 3.2 m (10 ft. 6 in.) 
Feature Overview
John Deere 2010DE
  • Struck capacity: 10.4 m³ (13.6 cu. yd.)
  • Heaped capacity: 15.3 m³ (20.0 cu. yd.)
  • Bowl width: 3.2 m (10 ft. 6 in.) 
We are here to help
Features

Productivity

Top-loading John Deere scrapers increase productivity for all applications.

Maximize productivity, minimize costs with 1/3 the initial investment, ½ the labor and ½ the cost (vs. self-propelled scrapers).

Features AutoLoad™ for smooth loading and efficient operation.

The standard offset-wheel frame assembly allows high-speed finishing and stability during hauling, loading, and unloading processes.


Heaped capacities have been increased up to six percent, to 12.2 m3 (16.0 cu. yd.) over previous models.

Integrated overflow spill guard, standard on all ejector models, increases capacity while preventing spillage.


Increase the versatility of your scraper fleet by connecting a front or rear scraper, or run our larger scrapers in a triple-pan configuration. That means hauling up to 54.9 m3 (72 cu. yd.) per cycle with only a single operator and rig.

With their wide throat opening and exclusive blade system, loading these ejector scrapers is quick and easy. Mix and match standard and long blades to fit almost any application or material condition.

Also available in two-tire configuration for better performance in soft conditions.


Equip your 20 or 24 cu. yd. scraper with optional heavy-duty disc brakes for shorter stops, loaded or empty.


One-year warranty is standard on all models.


Redesigned inner wall ensures smooth, snag-free ejection for spreading controlled, consistent loads.


Maximize productivity and minimize costs with the John Deere scraper system

Throughout the world, contractors have been moving material with conventional self-propelled scrapers or rigid/articulated trucks and excavators. John Deere scraper tractors and scrapers are a valuable solution for contractors, allowing them to move the same material using half the labor, half the investment, and saving 30 cents per cu yd to 50 cents per cu yd.

9570RX Scraper Tractor and 2412D E Ejector Scraper9570RX Scraper Tractor and 2412D E Ejector Scraper
2412D E Ejector Scraper2412D E Ejector Scraper

Half the labor

The John Deere scraper system is an independent earthmoving system requiring one operator to load, transport, and spread the materials on a job site. Self-propelled and truck/excavator earthmoving systems need additional support equipment to assist with loading and spreading the materials, increasing labor requirements.

 

Half the investment

Compare the purchase price of a John Deere scraper tractor and scrapers to competitive systems. Factor in the labor costs, fuel burn, daily operating expenses of all the equipment used in the system, and it all adds up to half the savings over the life of the equipment.

 

Saving 30 to 50 cents per cu yd

The savings are already adding up with the reduced labor requirements and lower investment costs. Experience additional savings from reduced fuel consumption by having only one tractor engine performing all of the work. Increase productivity moving more yards per cycle when using the 16-m3 or 18.3-m3 (21-cu yd or 24-cu yd) scrapers in tandem or triple configurations.

 

Applications for the John Deere scraper systems are as follows:

  • Residential development
  • Commercial development
  • Road construction
  • Mining/quarries
  • Levee construction
  • Reservoir construction
  • Airport construction
  • Precision leveling

Manual loading (left) vs. AutoLoad (right)Manual loading (left) vs. AutoLoad (right)

An innovation in the earthmoving industry exclusive to John Deere, the AutoLoad feature allows novice and experienced operators alike to be consistently productive while operating John Deere tractors and scrapers with the touch of a button, even if they have never operated tractors and scrapers.


Tandem 2412D E being top-loadedTandem 2412D E being top-loaded

John Deere scrapers are designed to handle the harsh conditions of top-loading scrapers. The updated swept-back design to the top off the ejector wall provides a better, unobstructed bowl opening. Heavily shielded hydraulic lines, cylinders, and components provide protection when top loading needs arise. When conditions do not allow for direct loading, John Deere scraper systems can provide as much as 80 tons per cycle in top loading capacity with triples.

 

Top-loading produces a force caused by the weight of the material falling into the scraper. With the scraper sitting on the ground, this force travels into the ground through the frame of the scraper. If the scraper is in the raised position, the force could cause extreme hydraulic pressure spikes, which can severely damage the hydraulic system of the scraper tractor and scraper.

 

During top loading procedure, make sure the scraper blade is lowered and resting on the ground.

 

Top-loading scrapers in the raised position could void the scraper warranty.


All John Deere ejector scrapers are approved for push loading with a crawler
John Deere crawler pushes an ejector scraperJohn Deere crawler pushes an ejector scraper

Sometimes, harsh conditions call for a little extra power. In the world of self-propelled scrapers, push loading with a crawler is a way of life.

 

While John Deere pull-type scrapers can direct load in almost any condition, the ability to push load has been built into the design of the ejector line to give earthmovers the additional versatility to which they are accustomed. Rock, hard pan, or heavy gumbos are just a few of the conditions where a crawler assist can keep the dirt moving.

 

Push loading is approved in single, tandem, and triple ejector trains where a rear scraper extended rear bumper is employed. The 2010D E and 2412D E two-tire models feature an integrated push block standard.


Precision level custom land formations to better manage water
iGradeiGrade

The iGrade controller enables and automates new water management applications, as well as John Deere's existing water management tool, Surface Water Pro™ Plus system. iGrade offers the ability to generate a basic plane and grade, as well as perform distance-based tasks – all while automatically controlling the height of the scraper blade.

 

iGrade provides four applications to complete different tasks:

  • Surface Water Pro Plus automation
  • Grade control
  • Distance trip
  • Plane control

The iGrade controller works with many of the different John Deere Precision Ag Technology components producers may already own, such as:

  • GreenStar™ 2 2600 Display
  • StarFire™ iTC receiver
  • StarFire 3000 Receiver
  • AutoTrac™ assisted steering system
  • Surface Water Pro Plus

iGrade is approved for the following platforms:

  • 9xxx, 8xxx, and 8R Series Wheel Tractors
  • 8xxx and 8R Series Track Tractors
  • Any selective control valve (SCV) operated water-management implement approved for the above John Deere tractors

NOTE: iGrade requires the receiver to have a real-time kinetic (RTK) signal level. iGrade does not support wide-area augmentation system (WAAS), SF1, or SF2 signal levels. 


John Deere scraper systems in construction
Top-loading large-scale commercial constructionTop-loading large-scale commercial construction
Small-scale residential constructionSmall-scale residential construction

In both large- and small-scale jobs for commercial and residential applications, John Deere scraper systems shine. From 41.3 m³ to 13.8 m³ (54 cu yd to 18 cu yd), with the pull of a pin, John Deere scrapers make it versatile enough for contractors who work in a broad range of job types.

 

John Deere scrapers are a valuable part of any construction fleet, whether as the primary mover or a complement to other equipment. Scrapers excavate, carry, spread, and grade material, making it the most efficient and versatile machine on any job site.

Agricultural applications
Precision leveling farm land with iGrade™ leveling systemPrecision leveling farm land with iGrade™ leveling system
Levee constructionLevee construction

John Deere scraper systems are not just for precision laser land leveling. A sophisticated suite of precision agriculture products is offered, including iGrade for land leveling and Surface Water Pro™ Plus system for ditching and levee building.

 

The scrapers are also perfect for cattle feed lot maintenance, grain bin foundations, waterway topsoil reclamation, commercial ponds, and much more. Anywhere material needs to be moved, John Deere scrapers provide a solution that can excavate, carry, and grade material with one operator, one implement, and one tractor. This gives the grower or contractor a level of efficiency that cannot be achieved with most traditional construction equipment.

Mining applications
Scrapers hauling coalScrapers hauling coal
Stripping overburdenStripping overburden

Just as contractors have adopted scrapers for their exemplary cost and productivity, miners look for greater efficiency when moving dirt or mined material. Scrapers are an excellent way to strip and reclaim overburden in pit mines or to simply haul stockpiled mined material such as coal.

 

John Deere scrapers are built to handle the most unique materials – nimble enough to handle light materials like coal yet rugged enough for heavier materials like wet sea salt.

Waste management applications
Building cells in a landfillBuilding cells in a landfill

John Deere scraper systems are perfect for building and covering landfill cells in waste management applications. Waste management companies have experienced tremendous savings by trading in their trucks and excavators for the John Deere scraper system.

 

Scrapers not only do a great job of creating a cell, but their ability to spread material on grade make it ideal for covering waste. The gang of tires compact the material as it is unloaded and will not destroy haul roads. The scraper’s heavy-duty, rock-lug tires can handle the hazardous conditions found in a landfill. When heavy-garbage trucks deteriorate the offloading ramp, use the scraper blade to grade and rebuild it.


Specs
*Manufacturer's suggested price. MSRP may be different in California. Taxes, freight, setup, and delivery not included. Optional accessories and attachments not included. Equipment, models and prices may vary by dealer. Product options and accessories may not be available in all regions. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. Offers valid in the United States. Prices in U.S. dollars.
Belle Glade

2017 Northwest 16th Street
Belle Glade, FL 33430
561-996-6531

Map & Hours
Boynton Beach

1335 Neptune Dr
Boynton Beach, FL 33426
561-732-8905

Map & Hours
Brooksville

22255 Cortez Blvd
Brooksville, FL 34601
352-573-2720

Map & Hours
Fort Myers

9501 FL-82
Fort Myers, FL 33905
239-332-5045

Map & Hours
Fort Pierce

6150 Orange Ave
Fort Pierce, FL 34947
772-461-5568

Map & Hours
Immokalee

775 E Main St
Immokalee, FL 34142
239-657-4413

Map & Hours
Largo

6785 114th Ave
Largo, FL 33773
727-828-8200

Map & Hours
Leesburg

1800 US-441
Leesburg, FL 34748
352-315-1016

Map & Hours
Loxahatchee

13295 Southern Blvd
Loxahatchee, FL 33470
561-784-4000

Map & Hours
Naples

1945 Pine Ridge Rd
Naples, FL 34109
239-260-8800

Map & Hours
North Port

2825 Commerce Parkway
North Port, FL 34289
941-924-9709

Map & Hours
Odessa

2240 Success Dr
Odessa, FL 33556
727-842-8618

Map & Hours
Okeechobee

820 US-98
Okeechobee, FL 34972
863-763-1921

Map & Hours
Orlando

12049 S Orange Blossom Trail
Orlando, FL 32837
407-240-1023

Map & Hours
Palmetto

906 US-301
Palmetto, FL 34221
941-722-3281

Map & Hours
Plant City

2805 West, FL-60
Plant City, FL 33567
813-737-1660

Map & Hours
St Cloud

117 13th St
St Cloud, FL 34769
321-209-4888

Map & Hours
©2020 EFE, Inc. All Rights Reserved | Designed In-House by Everglades Equipment Group